Quality Assurance and Quality Management (funding period 2)
Last Update: 23.01.2017
Only a sustainable and robust production guarantees all advantages, which are provided by the sheet-bulk metal forming technology. Therefore it is not enough to be able to produce highly complex workpieces, moreover the construction’s specifications concerning the dimensional accuracy and the quality have to be met to avoid wastage.
As a common aim the working group quality assurance / quality management is going to support the commutation about workpiece quality and provides methods for a save and robust production. For this projects from each phase of the product development are engaged.
Quality assurance considers process control, which contains the topics measurement techniques as well as the selection of appropriate inspection strategies. Quality control loops help to detect input and output factors together with disturbing influences.
With the working group quality assurance / quality management a professional exchange of information and knowledge is ensured, which enables efficient process improvements. Basis for this exchange is the commonly defined and constantly updated glossary. Thus a clear communication of experts’ knowledge is possible. Moreover a sensitization for the topic “quality” is supported.
Projects
Participants
Head of Working Group
Members
Publications
2016
- Breitsprecher, T.; Küstner, C.; Wartzack, S.: Development of a self-learning assistance system for the use within sheet-bulk metal forming. In: Knowledge-Based Systems, (2016), Elsevier, submitted
- Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner, S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B.: Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process. In: Production Engineering, 10(2016)1, DOI 10.1007/s11740-015-0647-2, pp. 51-61
- Loderer, A.; Hausotte, T.: Qualification concept for optical multi-scale multi-sensor systems. In: Journal of Sensors and Sensor Systems JSSS, 5(2016)1, pp. 1-8
- Küstner, C.; Beyer, F.; Kumor, D.; Loderer, A.; Wartzack, S.; Willner, K.; Blum, H.; Rademacher, A.; Hausotte, T.: Simulation-based development of Pareto-optimized tailored blanks for the use within sheet-bulk metal forming. In: Marjanovic, D.; Storga, M.; Pavkovic, N.; Bojcetic, N.; Skec, S. (Edt.): DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, (2016), Design Society, pp. 291-300
- Küstner, C.; Mitsch, J.; Hegwein, M.; Meintker, N.; Mönks, K.; Fröhlich, M.; Wartzack, S.: Zustandsdiagnose von Maschinen im Kontext von Industrie 4.0 unter Einsatz von Data-Mining Methoden. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X - Beiträge zum 27. DFX-Symposium 2016, (2016), Hamburg: TuTech, pp. 169-180
- Loderer, A.; Hausotte, T.: Ganzheitliche dimensionelle Messung von blechmassivumgeformten Bauteilen. In: Stefan Zimmermann (Edt.): XXX. Messtechnisches Symosium 2016, (2016), Berlin: DE Gruyter, pp. 133-140
2015
- Landkammer, P.; Söhngen, B.; Loderer, A.; Krebs, E.; Steinmann, P.; Willner, K.; Hausotte, T.; Kersting, P.; Biermann, D.: Experimentelle Verifizierung eines Benchmark-Umformprozesses. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 91-110
- Breitsprecher, T.; Sauer, C.; Sperber, C.; Wartzack, S.: Design-for-manufacture of sheet-bulk metal formed parts. In: Weber, C.; et al. (Edt.): DS80-4 Proceedings of the 20th International Conference on Engineering Design (ICED15), (2015), Mailand: Design Society, pp. 183-192
- Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying Measuring Systems by using Six Sigma. In: Key Engineering Materials, 637(2015), pp. 37-43
- Loderer, A.; Timmermann, M.; Matthias, S.; Kästner, M.; Schneider, T.; Hausotte, T.; Reithmeier, E.: Measuring systems for sheet-bulk metal forming. In: Key Engineering Materials, 639(2015), pp. 291-298
- Landkammer, P.; Loderer, A.; Krebs, E.; Söhngen, B.; Steinmann, P.; Hausotte, T.; Kersting, P.; Biermann, D.; Willner, K.: Experimental verification of a benchmark forming simulation. In: Key Engineering Materials, 639(2015), pp. 251-258
- Loderer, A.; Timmermann, M.; Hausotte, T.: Methodical approach for selecting an appropriate sensor of a multi-sensor fringe projection system.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
- Timmermann, M.; Weinert, B.; Schuler, A.; Loderer, A.; Hausotte, T.: Fibre-optical 3-D measurement of highly curved free-form surfaces.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
- Hartmann, W.: Mess- und Auswertestrategien zur modellbasierten Bewertung funktionaler Eigenschaften mikrostrukturierten Oberflächen. In: Weckenmann, A. (Edt.): Berichte aus dem Lehrstuhl Qualitätsmanagement und Fertigungsmesstechnik, 30(2015), Aachen: Sharker, published
- Loderer, A.; Hartmann, W.; Hausotte, T.: Calibration Concept for Dimensional Measurements with Optical Multiscale Multi-Sensor Systems. In: AMA Service GmbH (Edt.): AMA Conferences 2015 - SENSOR 2015 and IRS² 2015, (2015), Wunstdorf: AMA Service GmbH, pp. 447-452
- Gröbel, D.; Schneider, T.; Merklein, M.: Sheet-Bulk Metal Forming. In: Tekkaya, A.E.; Homberg, W.; Brosius, A. (Edt.): 60 Excellent Inventions in Metal Forming, (2015), Springer, pp. 101-106
2014
- Ashhab, M.S.; Breitsprecher, T.; Wartzack, S.: Neural network based modeling and optimization of deep drawing – extrusion combined process . In: Journal of Intelligent Manufacturing, 25(2014)1, Springer, pp. 77-84
- Schneider, T.; Vierzigmann, U.; Merklein, M.: Analysis of Varying Properties of Semi-finished Products in Sheet-bulk Metal Forming of Functional Components. In: J. W. Yoon, T. B. Stoughton, B. Rolfe, J. H. Beynon, P. Hodgson (Edt.): NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, (2014), pp. 930-933
- Faßmann, D.: Beitrag zur wechselseitigen Beeinflussung von Mikrostruktur und Blechmassivumformprozess. Dissertation, Berichte aus dem IW, 1(2014), Hannover: PZH-Verlag, published
- Loderer, A.; Hausotte, T.; Steinmann, P.; Merklein, M.; Landkammer, P.; Schneider, T.; Hildenbrand, P.: Development of a feature adapted measurement evaluation strategy. In: PTB open access repository (Edt.): MacroScale 2014 - Recent developments in traceable dimensional measurements, 10.7795/810.20150325P, (2014), Wien, pp. 1-13
2013
- Lehmann, E.; Faßmann, D.; Löhnert, S.; Schaper, M.; Wriggers, P.: Texture development and formability prediction for pre-textured cold rolled body-centred cubic steel. In: International Journal of Engineering Science, 68(2013), pp. 24-37
- Breitsprecher, T.; Wartzack, S.: A classification system for secondary design features for the use within sheet-bulk metal forming. In: Lindemann, U.; Srinivasan, V.; Kim, Y.S.; et al. (Edt.): DS 75-5: Proceedings of the 19th International Conference on Engineering Design (ICED13), (2013), Seoul: Design Society, pp. 039–048
- Salfeld, V.; Krimm, R.; Hübner, S.; Vucetic, M.: Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts. In: Advanced Materials Research, 769(2013), Switzerland: Trans Tech Publication, pp. 229-236
- Weckenmann, A.; Hartmann, W.: Function-oriented Measurements - the Path from Macro to Micro and Nano Range. In: Aguilar Martin, J.; Yagäe Fabra, J.; Lope Domingo, M.; Santolaria Mazo, J.; Albajez Garcia, J. (Edt.): Proceedings of the 5th Manufacturing Engineering Society International Conference (5th Manufacturing Engineering Society International Conference - MESIC 2013, (2013), Zaragoza, Spain, published
- Hartmann, W.; Weckenmann, A.: Function-Oriented Dimensional Metrology - More than Determining Size and Shape. In: AMA Service GmbH (Edt.): Proceedings of AMA Conferences 2013 with SENSOR, OPTO, IRS² (Sensor 2013 - 16th International Conference on Sensors and Measurement Technology, Nürnberg, 14.–16.05.2013), (2013), pp. 285-290
- Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.: Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), Bamberg: Meisenbach, pp. 101-118
- Weckenmann, A.; Hartmann, W.: Function-oriented Measurements – the Path from Macro to Micro and Nano Range. In: Procedia Engineering, 63(2013), Amsterdam: Elsevier, pp. 861 - 872
- Hartmann, W.; Loderer, A.: Measurement procedures and evaluations methods for the extraction and assessment of functional features of microstructured surfaces. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 61
- Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying measuring systems by using Six Sigma. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 93
- Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Measurement strategy for a production-related multi-scale inspection of formed work pieces.. In: Seliger, G. (Edt.): Proceedings of the 11th Global Conference on Sustainable Manufacturing - Innovative Solutions, (2013), Berlin: Universitätsverlag der TU Berlin, pp. 148-153
Presentations
2016
- 18.05.2016: Küstner, C.: Simulation-based development of Pareto-optimized tailored blanks for the use within sheet-bulk metal forming, Cavtat
- 06.10.2016: Küstner, C.: Zustandsdiagnose von Maschinen im Kontext von Industrie 4.0 unter Einsatz von Data-Mining Methoden, Jesteburg
2015
- 29.07.2015: Breitsprecher, T.: Design-for-manufacture of sheet-bulk metal formed parts, ICED15, Mailand
2014
- 21.05.2014: Kestel, P.: Gaussian process based approach for automatic knowledge acquisition, DESIGN2014, Dubrovnik
- 17.10.2014: Breitsprecher, T.: Ein Ansatz zur adaptiven Simulationsdatenerhebung, KT2014, Bayreuth
2013
- 19.08.2013: Breitsprecher, T.: A classification system for secondary design features for the use within sheet-bulk metal forming, ICED13, Seoul