TR73

  • Increase font size
  • Default font size
  • Decrease font size


Publications



    2022

    • Gutknecht, F.; Traphöner, H.; Clausmeyer, T.; Tekkaya, A.: Characterization of flow induced anisotropy in sheet metal at large strain. In: Experimental Mechanics, 62(2022)441, pp. 1-18

    2021

    • Müller, P.; Hübner, S.; Rosenbusch, D.; Behrens, B.: Investigation of the Influence of a Superimposed Oscillated Forming Process on Forming Characteristics. In: The 19th International Conference on Sheet Metal (Edt.): (2021), submitted
    • Vogel, M.; Schulte, R.; Kaya, O.; Merklein, M.: Manufacturing of tailored blanks with pre-shaped involute gearings by using a flexible rolling process and its application in a sheet-bulk metal forming process. In: The 13th International Conference on the Technology of Plasticity, (2021), accepted
    • Schewe, M.; Wilbuer, H.; Menzel, A.: Simulation of wear and effective friction properties of microstructured surfaces . In: Wear, 464(2021), elsevier, pp. 203491
    • Behrens, B.; Krimm, R.; Commichau, O.: The Effects of Press Ram Vibrations on the Product Quality . In: The 13th International Conference on the Technology of Plasticity , (2021), accepted
    • Hinz, L.; Kästner, M.; Reithmeier, E.: Improved defect segmentation by combining a fiber optic fringe projection system with a directionally variable front brightfield illumination. In: SPIE Photonics West, Emerging Digital Micromirror Device Based Systems and Applications XIII, (2021), Bellingham, WA, USA: SPIE, published
    • Weikert, T.; Tremmel, S.: Amorphous Carbon Coatings for Sheet-Bulk Metal Forming Tools. In: M. Merklein, A. E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020. Lecture Notes in Production Engineering, (2021), Zug: Springer Nature Switzerland, pp. 192-215
    • Henneberg, J.; Beyer, F.; Löffler, M.; Willner, K.; Merklein, M.: Constitutive Friction Law for the Description and Optimization of Tailored Surfaces. In: Merklein, M; Tekkaya, A. E.; Behrens, B.-A. (Edt.): Sheet Bulk Metal Forming, (2021), Zug: Springer Nature, accepted
    • Reck, M.; Rohrmoser, A.; Jobst, A.; Pilz, F.; Merklein, M.: Forming of complex functional elements on sheet metal. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming, (2021), Springer Nature Switzerland AG, pp. 30 - 52
    • Wild, T.; Merklein, M.: Tool Sided Surface Modifications in the Industrial Environment. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming, (2021), Springer Nature Switzerland AG, pp. 477-492
    • Söhngen, B.; Caspari, M.; Willner, K.; Steinmann, P.: On optimization strategies for inverse problems in metal forming. In: M. Merklein, A. E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020, (2021), Zug: Springer Nature Switzerland, pp. 354-377
    • Tillmann, W.; Stangier, D.: Application of Nanostructured Bionic Thin Layers to Enhance the Wear and Friction Behavior of Tools for Sheet-Bulk Metla Forming. In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Edt.): Sheet Bulk Metal Forming, (2021), Springer, pp. 216-238
    • Platt, T.; Biermann, D.: Functionalization of Tool Topographies for Material Flow Control and Tool Life Optimization in Hot Sheet-Bulk Metal Forming – A Concept Study. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming, (2021), Springer Nature Switzerland AG, pp. 0
    • Besserer, H.; Nürnberger, F.; Maier, H.: Fatigue Behavior of Sheet-Bulk Metal Formed Components. In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Edt.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020, (2021), Cham: Springer, pp. 412-433
    • Meijer, A.; Biermann, D.: Machining of Molds with Filigree Structures for Sheet-Bulk Metal Forming. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming - Research Results of the TCRC73, (2021), Springer Nature Switzerland AG, pp. 141-171
    • Wackenrohr, S.; Nürnberger, F.; Maier, H.: Fatigue Life Compliant Process Design for the Manufacturing of Cold Die Rolled Components. In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Edt.): Sheet Bulk Metal Forming. Research Results of the TCRC73 2020, (2021), Springer, pp. 568-585
    • Keitel, M.; Denkena, B.; Krödel-Worbes, A.: Grinding Strategies for Local and Stress Orientated Subsurface Modification of Sheet-Bulk Metal Forming Tools. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Edt.): Sheet Bulk Metal Forming - Research Results of the TCRC73, (2021), Springer Nature Switzerland AG, pp. 286-306
    • Weikert, T.; Wartzack, S.; Baloglu, M. V.; Willner, K.; Gabel, S.; Merle, B.; Pineda, F.; Walczak, M.; Marian, M.; Rosenkranz, A.; Tremmel, S.: Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation. In: Surface & Coatings Technology, 407(2021), Elsevier B.V., pp. 126769
    • Hinz, L.; Kästner, M.; Reithmeier, E.: Impact of multireflections on measurement accuracy in the endoscopic 3D reconstruction of gearing geometries. In: SPIE Optical Metrology, (2021), Bellingham, WA, USA: SPIE, accepted
    • Wernicke, S.; Hahn, M.; Detzel, A.; Tillmann, W.; Stangier, D.; Lopes Dias, N. F.; Tekkaya, A.: Force Reduction by Electrical Assistance in Incremental Sheet-Bulk Metal Forming of Gears. In: Journal of Materials Processing Technology, 296(2021), Elsevier, pp. 117194
    • Platt, T.; Meijer, A.; Merhofe, T.; Biermann, D.: Simulation-Based and Experimental Investigation of Micro End Mills with Wiper Geometry. In: Micromachines (Edt.): Micro-Manufacturing and Applications: Advanced Micro Processing Technology, Devices and Equipment, Volume II, 12(2021)5, pp. 496
    • Hinz, L.; Metzner, S.; Müller, P.; Schulte, R.; Besserer, H.; Wackenrohr, S.; Sauer, C.; Kästner, M.; Hausotte, T.; Hübner, S.; Nürnberger, F.; Schleich, B.; Behrens, B.; Wartzack, S.; Merklein, M.; Reithmeier, E.: Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming. In: Steve Vanlanduit (Edt.): 21(2021)7, Basel, Suisse: MDPI Sensors, published
    • Hinz, L.; Kästner, M.; Reithmeier, E.: Adaptive camera calibration for a focus adjustable liquid lens in fiber optic endoscopy. In: SPIE Optics+Optoelectronics: Nonlinear Optics and Applications XII, (2021), Bellingham, WA, USA: SPIE, published
    • Sauer, C.; Breitsprecher, T.; Küstner, C.; Schleich, B.; Wartzack, S.: Architecure and self-learning within an assistance system for design for manufacturing within sheet-bulk metal forming . In: Kenji Suzuki (Edt.): 21(2021)3, Basel, Suisse: MDPI AI, submitted
    • Behrens, B.; Hübner, S.; Müller, P.; Matthias, T.; Müller, F.; Brunotte, K.; Wälder, J.; Wester, H.: Further Development of Wear Calculation and Wear Reduction in Cold Forging Processes . In: JMMP (Edt.): 5(2021)2, MDPI, published
    • Sauer, C.; Schleich, B.; Wartzack, S.: Simultaneous Development of a Self-learning Engineering Assistance System. In: Merklein M., Tekkaya A.E., Behrens BA. (Edt.): Lecture Notes in Production Engineering, (2021), Cham: Springer, pp. 127-146
    • Wernicke, S.: Inkrementelle Blechmassivumformung belastungsangepasster Funktionsbauteile. In: Prof. Dr.-Ing. M. Kleiner (Edt.): Dissertation an der Fakultät Maschinenbau der Technischen Universität Dortmund, Dortmunder Umformtechnik, ISBN 978-3-8440-7980-7, 112(2021), Düren: Shaker Verlag, pp. 196
    • Wild, T.; Platt, T.; Biermann, D.; Merklein, M.: Analysis of the Influence of Surface Modifications on the Fatigue Behavior of Hot Work Tool Steel Components. In: Materials, 14(2021)23, pp. 1-15
    • Meijer, A.; Merhofe, T.; Platt, T.; Biermann, D.: Algorithmen-basierte Freiformflächenstrukturierung/Generation of NC programs for the micromilling structuring of free-form surfaces – Algorithm-based free-form surface structuring. In: wt Werkstattstechnik online (Edt.): 111(2021), pp. 797–802
    • Denkena, B.; Krödel-Worbes, A.; Keitel, M.; Wolters, P.: Influence of dressing strategy on tool wear and performance behavior in grinding of forming tools with toric grinding pins. In: Production Engineering, (2021), pp. 1-10

    2020

    • Vogel, M.; Schulte, R.; Hetzel, A.; Lechner, M.; Merklein, M.: Verfahrenskombination zur umformtechnischen Herstellung von verzahnten, dünnwandigen Funktionselementen aus prozessoptimierten Halbzeugen. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, (2020), Hannover: TEWISS, pp. 178
    • Hetzel, A.; Lechner, M.: Lokale Kurzzeitwärmebehandlung zur Erweiterung der Formgebungsgrenzen prozessangepasster Halbzeuge der Aluminiumlegierung AA6016. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, (2020), Hannover: TEWISS, pp. 86-93
    • Wernicke, S.; Hahn, M.; Tekkaya, A.; Gerstein, G.; Nürnberger, F.: Strain path dependency in incremental sheet-bulk metal forming. In: International Journal of Material Forming, (2020), DOI: 10.1007/s12289-020-01537-0, published
    • Pilz, F.; Henneberg, J.; Merklein, M.: Extension of the forming limits of extrusion processes in sheet-bulk metal forming for production of minute functional elements. In: Manufacturing Review, 7(2020), pp. 1-12
    • Henneberg, J.; Beyer, F.; Willner, K.; Merklein, M.: Konstitutives Reibgesetz zur Beschreibung und Optimierung von Tailored Surfaces. In: 23. Umformtechnisches Kolloquium Hannover (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik, (2020), accepted
    • Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Krebs, E.; Biermann, D.: Tribological Studies on Multi-Coated Forming Tools. In: Journal of Manufacturing Processes, 49(2020), pp. 141-152
    • Besserer, H.; Herbst, S.; Nürnberger, F.: Ermüdungsprüfung von blechmassivumgeformten Bauteilen. In: Behrens, B.-A. (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover, (2020), Garbsen: TEWISS, pp. 100-104
    • Weikert, T.; Tremmel, S.: Dünnschichtsensoren zur Verschleißdetektion als Beitrag zur Auslegung intelligenter Werkzeuge – eine Machbarkeitsstudie. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): 4. Workshop Blechmassivumformung: Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen, (2020), Erlangen: FAU University Press, pp. 133-146
    • Weikert, T.; Tremmel, S.: Amorphe Kohlenstoffschichten für Werkzeuge der Blechmassivumformung. In: B.-A. Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik, (2020), Garbsen, pp. 1-2
    • Behrens, B.; Hübner, S.; Müller, P.; Wester, H.; Matthias, T.: Numerische Berechnung des Werkzeugverschleißes an industriellen Kaltumformprozessen mittels der Weiterentwicklung der Verschleißmodellierung. In: 23. Umformtechnisches Kolloquium Hannover (Edt.): AKTUELLE ENTWICKLUNGEN IM BEREICH DER UMFORMTECHNIK, (2020), pp. 162
    • Müller, P.; Hübner, S.; Rosenbusch, D.; Behrens, B.: Leistungsstarke Schwingungsüberlagerung in Umformprozessen. In: 23. Umformtechnisches Kolloquium (Edt.): Aktuelle Entwicklungen um Bereich der Umformtechnik, (2020), Hannover, pp. 105-111
    • Wild, T.; Merklein, M.: Analyse des tribologischen Einsatzverhaltens von modifizierten Werkzeugoberflächen. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, (2020), TEWISS, pp. 35-42
    • Denkena, B.; Breidenstein, B.; Lucas, H.; Keitel, M.; Tillmann, W.; Stangier, D.: Influence of Residual Stresses in heat-treated High-Speed Steels on the Adhesion of CrAlN Coatings. In: Journal of Heat Treatment and Materials, 75(2020), pp. 163-176
    • Hetzel, A.; Merklein, M.; Lechner, M.: Enhancement of the Forming Limits for Orbital Formed Tailored Blanks by Local Short-term Heat Treatment. 23rd International Conference on Material Forming. In: Procedia Manufacturing, 47(2020), pp. 1197-1202
    • Wackenrohr, S.; Bongers, S.; Herbst, S. ; Nürnberger, F.; Maier, H.: Entwicklung und Analyse der duktilen Schädigung beim Kaltgesenkwalzen. In: Behrens, B.-A. (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover, (2020), Garbsen: TEWISS, pp. 27-35
    • Behrens, B.; Rosenbusch, D.; Hübner, S.; , .; Brunotte, K.: Investigation of a Superimposed Oscillation Compression Process for the Production of a Bulk Component . In: Production at the leading edge of technology, (2020), published
    • Tremmel, S.; Marian, M.; Rothammer, B.; Weikert, T.; Wartzack, S.: Designing amorphous carbon coatings using numerical and experimental methods within a multi-scale approach. In: Key Engineering Materials, (2020), Trans Tech Publications, accepted
    • Tillmann, W.; Stangier, D.; Hagen, L.; Biermann, D.; Freiburg, D.; , .: Tribological investigation of surface structures processed by high-feed milling in HVOF sprayed WC-12Co coatings. In: Surface & Coatings Technology, 395(2020), pp. 125945
    • Behrens, B.; Matthias, T.; Müller, P.; Hübner, S.; Wester, H.; Wälder, J.: Investigation of the Influence of an Oscillation Superposition on the Wear Behaviour in an Industrial-like Process. In: 23rd International Conference on Material Forming (ESAFORM 2020) (Edt.): 47(2020), Procedia Manufacturing, pp. 315-320
    • Behrens, B.; Tillmann, W.; Biermann, D.; Hübner, S.; Stangier, D.; Freiburg, D.; , .; Koch, S.; Rosenbusch, D.; , .: Influence of Tailored Surfaces and Superimposed-Oscillation on Sheet-Bulk Metal Forming Operations. In: Journal of Manufacturing Materials Processing, 4(2020), pp. 41
    • Behrens, B.; Meijer, A.; Stangier, D.; Hübner, S.; Biermann, D.; Tillmann, W.; Rosenbusch, D.; , .: Static and oscillation superimposed ring compression tests with structured and coated tools for Sheet-Bulk Metal Forming. In: Journal of Manufacturing Processes, 55(2020), pp. 78-86
    • Behrens, B.; Hübner, S.; Müller, P.; Besserer, H.; Gerstein, G.; Koch, S.; Rosenbusch, D.: New Multistage Sheet-Bulk Metal Forming Process Using Oscillating Tools. In: Metals (Edt.): 10(2020)617, published
    • Caspari, M.; Landkammer, P.; Steinmann, P.: Shape optimization of a backward extrusion process using a non-invasive form finding algorithm. In: 23rd International Conference on Material Forming, 57(2020), Procedia Manufacturing, pp. 873-880
    • Henneberg, J.; Merklein, M.: Investigation on extrusion processes in sheet-bulk metal forming from coil. In: CIRP Journal of Manufacturing Science and Technology, (2020), accepted
    • Denkena, B.; Krödel-Worbes, A.; Keitel, M.: Schleifstrategien zur lokalen, belastungsorientierten Randzonenmodifikation von Blechmassivumformwerkzeugen. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, (2020), Hannover: TEWISS, pp. 180-181
    • Wernicke, S.; Thier, U.; Hahn, M.; Tekkaya, A.: Controlling material flow in incremental sheet-bulk metal Forming by thermal grading. In: Procedia Manufacturing, 50(2020), ELSEVIER, pp. 257-264
    • Wild, T.; Bestenlehrer, M.; Merklein, M.: Analysis of the Modification of Tool Surfaces by Abrasive Blasting and Laser Polishing. In: Defect and Diffusion Forum, 404(2020), pp. 124-131
    • Müller, P.; Rosenbusch, D.; Vogt, H.; Hübner, S.; Behrens, B.; Missal, N.: Further Development of a Hydraulically Operated Oscillation Device for Application to an Industrial Forming Process. In: Proceedings of the 10th Congress of the German Academic Association for Production Technology, (2020), published
    • Henneberg, J.; Merklein, M.: Measures for controlling the material flow when extruding sheet-bulk metal forming parts from coil. In: Manufacturing Review, 7(2020)36, pp. 1-13
    • Behrens, B.; Müller, P.; Hübner, S.; Rosenbusch, D.: Investigations of the Influence of a Superimposed Oscillation on the Fatigue Strength10(2020), Metals, published
    • Behrens, B.; Krimm, R.; Koß, J.; Commichau, O.: Charakterisierung von Horizontalbelastungen bei der Blechmassivumformung. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover, (2020), Hannover: TEWISS Verlag, submitted
    • Behrens, B.; Hübner, S.; Rosenbusch, D.; , .; Missal, N.: Schwingungsüberlagertes Axialformen. In: WT WerkstattsTechnik (Edt.): (2020), submitted
    • Pilz, F.: Fließpressen von Verzahnungselementen an Blechen. In: FAU Studien aus dem Maschinenbau, (2020), Erlangen: FAU University Press, published
    • Platt, T.; Meijer, A.; Biermann, D.: Conduction-Based Thermally Assisted Micromilling Process for Cutting Difficult-to-Machine Materials. In: Journal of Manufacturing and Materials Processing (Edt.): Advanced Manufacturing and Machining Processes, 4(2020)2, pp. 34
    • Clausmeyer, T.; Gutknecht, F.; Gerstein, G.; Nürnberger, F.: Testing of formed gear wheels at quasi-static and elevated strain rates. In: 23rd International Conference on Material Forming (Edt.): Procedia Manufacturing, 47(2020), Elsevier, pp. 623-628
    • Metzner, S.; Hausotte, T.: Extension of the registration possibilities and determination of the positioning precision of a multi-scale fringe projection system. In: Society of Photo-Optical Instrumentation Engineers (SPIE) (Edt.): Proceedings of SPIE - The International Society for Optical Engineering, 11397(2020), Anaheim: spiedigitallibrary, pp. 1-8
    • Metzner, S.; Knippen, W.; Hausotte, T.: Interferometrische Messung der Positioniergenauigkeit und Verkippung einer Hexapod-Positioniereinheit. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik, (2020), Hannover: TEWISS, pp. 178
    • Metzner, S.; Reuter, T.; Hausotte, T.: Measurement of the Beruforge 152DL thin-film lubricant using a developed thin-film thickness standard. In: Gerald Gerlach (Edt.): Journal of Sensors and Sensor Systems, 9(2020)1, Göttingen: Copernicus Publications, pp. 157-165
    • Behrens, B.; Krimm, R.; Commichau, O.: Analysis of horizontal loads in sheet-bulk metal forming and their consideration in simulation. In: Merklein, M.; Tekkaya, A. M.; Behrens, B.-A. (Edt.): Sheet Bulk Metal Forming - Research Results of the TCRC73, (2020), published
    • Bickel, S.; Sauer, C.; Schleich, B.; Wartzack, S.: Comparing CAD part models for geometrical similarity: A concept using machine learning algorithms. In: Procedia CIRP, (2020), in print
    • Sauer, C.; Schleich, B.; Wartzack, S.: Meta-model based generation of solution spaces in sheet-bulk metal forming Beitrag in einer Fachzeitschrift. In: Procedia CIRP, (2020)91, pp. 905-910
    • Hinz, L.; Kästner, M.; Reithmeier, E.: Adaptive merging of large datasets of a 3D measuring endoscope in an industrial environment. In: Proceedings of SPIE, 11352(2020)113520, SPIE Photonics Europe, published
    • Küstner, C.: Assistenzsystem zur Unterstützung der datengetriebenen Produktentwicklung. In: Jörg Franke, Nico Hanenkamp, Marion Merklein, Michael Schmidt, Sandro Wartzack (Edt.): Dissertation, C. Küstner, 1(2020)353, Erlangen: FAU University Press, pp. 219
    • Hinz, L.; Kästner, M.; Reithmeier, E.: High-Resolution Inspection of Tools for Novel Forming Processes by an Endoscopic Fringe Projection System. In: OSA Imaging and Applied Optics Congress, (2020), accepted
    • Hinz, L.; Kästner, M.; Reithmeier, E.: A 3D Measuring Endoscope for use in Sheet-Bulk Metal Forming: Design, Algorithms, Applications and Results. In: Lecture Notes in Production Engineering - Sheet-Bulk Metal Forming, (2020), Springer Nature Switzerland AG, accepted
    • Hinz, L.; Schulte, R.; Kästner, M.; Reithmeier, E.: Werkzeuginspektion in der Blechmassiv-umformung durch die faseroptische Streifenprojektionsmesstechnik. In: Behrens, B.-A. (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover, (2020), Garbsen: TEWISS, published
    • Wernicke, S.; Rosenthal, S.; Hahn, M.; Tekkaya, A.: Incremental Sheet-Bulk Metal Forming by application of thermal-controlled grading mechanisms. In: Lecture Notes in Production Engineering - Sheet-Bulk Metal Forming, (2020), Springer Nature Switzerland AG, accepted
    • Wernicke, S.; Hahn, M.; Tekkaya, A.: Fundamental Research and Process Development for the Manufacturing of Load-Optimized Parts by Incremental Sheet-Bulk Metal Forming. In: Lecture Notes in Production Engineering - Sheet-Bulk Metal Forming, (2020), Springer Nature Switzerland AG, accepted
    • Wernicke, S.; Hahn, M.; Tekkaya, A.: Herstellung Belastungsangepasster Funktionsbauteile Mittels Inkrementeller Blechmassivumformung. In: Extended Abstract in: Tagungsband des 23. Umformtechnischen Kolloquium Hannover – Innovationspotentiale in der Umformtechnik, 04. - 05. März, (2020), published
    • Gallus, S.; Wernicke, S.; Hahn, M.; Tekkaya, A.: Erweiterung der Prozessgrenzen beim Inkrementellen Blechmassivumformen durch Thermisches Gradieren der Halbzeuge. In: Extended Abstract im Tagungsband des 23. Umformtechnischen Kolloquium Hannover – Innovationspotentiale in der Umformtechnik, 04. - 05. März, (2020), published
    • Gallus, S.; Wernicke, S.; Hahn, M.; Tekkaya, A.: T03: Inkrementelle Blechmassivumformung unter Anwendung thermisch gesteuerter Gradierungsmechanismen. In: Poster-Session im Rahmen des 23. Umformtechnischen Kolloquium Hannover – Innovationspotentiale in der Umformtechnik, 04. - 05. März., (2020), published
    • Behrens, B.; Hübner, S.; Müller, P.; Missal, N.; Vogt, H.: Superimposed Oscillation. In: Sheet Bulk Metal Forming, (2020), pp. 515-534
    • Behrens, B.; Hübner, S.; Rosenbusch, D.; Müller, P.; Wester, H.: Dynamic Process Forces. In: Sheet Bulk Metal Forming, (2020), pp. 102-126
    • Behrens, B.; Matthias, T.; Hübner, S.; Müller, P.; Wester, H.; Wälder, J.: Numerical Calculation of Tool Wear in Industrial Cold Forming Processes Using the Further Development of Wear Modelling. In: Sheet Bulk Metal Forming, (2020), pp. 535-552

    2019

    • Hetzel, A.; Schulte, R.; Degner, J.; Merklein, M.: Maßgeschneiderte Halbzeuge - Umformtechnische Herstellung von Funktionsbauteilen zur Realisierung von Leichtbaukomponenten109(2019)10, Werkstattstechnik online, pp. 745-749
    • Wernicke, S.; Sieczkarek, P.; Gies, S.; Tekkaya, A.: Vorrichtung und Verfahren zur Randaufdickung eines Werkstückes. In: Europäische Patentanmeldung (Edt.): EP 3 498 394 A1, (2019), submitted
    • Wernicke, S.; Sieczkarek, P.; Gies, S.; Tekkaya, A.: Verfahren und Vorrichtung zur Verdickung des Randes eines Blechkörpers. In: Europäische Patentschrift (Edt.): EP 3 323 527 B1, (2019), accepted
    • Sauer, C.; Schleich, B.; Wartzack, S.: Einsatz von Graphdatenbanken für das Produktdatenmanagement im Kontext von Industrie 4.0. In: Ralph H. Stelzer, Jens Krzywinski (Edt.): Entwickeln Entwerfen Erleben in Produktentwicklung und Design 2019, (2019), Dresden: Thelem Universitätsverlag & Buchhandlung GmbH & Co. KG, pp. 393-406
    • Clausmeyer, T.; Nürnberger, F.; Gutknecht, F.; Isik, K.; Besserer, H.; Gerstein, G.; Wernicke, S.; Schulte, R.; Tekkaya, A.; Merklein, M.; Maier, H.: Analyse und Modellierung von Schädigung und Versagen in der Blechmassivumformung. In: Merklein, M.; Behrens, B.-A.; Tekkaya, A. E. (Edt.): 4. Workshop Blechmassivumformung, (2019), Erlangen: FAU University Press, pp. 33-60
    • Wernicke, S.; Gies, S.; Tekkaya, A.: Manufacturing of Hybrid Gears by Incremental Sheet-Bulk Metal Forming. In: Procedia Manufacturing, 27(2019), ELSEVIER, pp. 152-157
    • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the Material flow in sheet-bulk metal forming using modifications of the tool surface. In: International Journal of Material Forming, 12(2019), pp. 17-26
    • Freiburg, D.; Aßmuth, R.; Garcia Carballo, R.; Biermann, D.; Henneberg, J.; Merklein, M.: Adaption of tool surface for sheet-bulk metal forming by means of pressurized air wet abrasive jet machining. In: Production Enginieering, 13(2019), pp. 71-77
    • Merklein, M.; Gröbel, D.; Löffler, M.; Henneberg, J.: Investigation on blasted tool surfaces as a measure for material flow control in sheet-bulk metal forming. In: Manufacturing Review, 6(2019), pp. 1-9
    • Henneberg, J.; Lucas, H.; Denkena, B.; Merklein, M.: Investigation on the Tribological Behavior of Tool-sided Tailored Surfaces for Controlling the Material Flow in Sheet-Bulk Metal Forming. In: AIP Conference Proceedings 2113 (Edt.): Proceedings of the 22nd International ESAFORM Conference on Material Forming, (2019), pp. 1-6
    • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the material flow in sheet-bulk metal forming using modifications of the tool surface. In: International Journal of Material Forming, 12(2019), pp. 17-26
    • Tillmann, W.; Hagen, L.; Stangier, D.; Krabiell, M.; Schröder, P.; Tiller, J.; Krumm, C.; Sternemann, C.; Paulus, M.; Elbers, M.: Influence of etching-pretreatment on nano-grained WC Co surfaces and properties of PVD/HVOF duplex coatings. In: Surface and Coatings Technology, 374(2019), pp. 32-43
    • Tillmann, W.; Stangier, D.; Roese, P.; Shamout, K.; Berges, U.; Westphal, C.; Debus, J.: Structural and mechanical properties of carbon incorporation in DC/HiPIMS CrAlN coatings. In: Surface & Coatings Technology, 374(2019), pp. 773-783
    • Tillmann, W.; Hagen, L.; Stangier, D.; Paulus, M.; Tolan, M.; Sakarowski, R.; Biermann, D.; Freiburg, D.: Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. In: Surface & Coatings Technology, 374(2019), pp. 448-459
    • Behrens, B.; Biermann, D.; Tillmann, W.; Krimm, R.; Meijer, A.; Schewe, M.; Stangier, D.; Commichau, O.; Müller, P.; Rosenbusch, D.; Menzel, A.: Untersuchungen strukturierter Werkzeugflächen und der Einfluss auf den Werkzeugverschleiß. In: 4. Industriekolloquium Blechmassivumformung 2019 – DFG Transregio 73, (2019), pp. 7-30
    • Müller, P.; Rosenbusch, D.; Behrens, B.; Hübner, S.: Investigations of forming force, friction values and surface qualities in ring compression tests using oscillating tools. In: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP) (Edt.): (2019), Hamburg, pp. 73-81
    • Marian, M.; Weikert, T.; Tremmel, S.: On Friction Reduction by Surface Modifications in the TEHL Cam/Tappet‐Contact‐Experimental and Numerical Studies. In: Coatings, 9(2019)12, MDPI, pp. 1-16
    • Marian, M.; Weikert, T.; Tremmel, S.: Numerical and Experimental Studies on Friction Reduction by Surface Modification in TEHL Contacts. In: Proceedings of the 74th STLE Annual Meeting & Exhibition, (2019), pp. 1-3
    • Odening, D.; Rauschnabel, E.: Blechmassivumformung im Bereich der Rohrumformung. In: Merklein, M.; Behrens, B.-A.; Tekkaya, A. E. (Edt.): 4. Workshop Blechmassivumformung, (2019), Erlangen: FAU University Press, pp. 61-69
    • Denkena, B.; Grove, T.; Wolters, P.; Lucas, H.: Werkzeugstandzeiten durch Formschleifen verbessern. In: MM Maschinenmarkt, 7(2019), pp. 48-53
    • Lucas, H.; Denkena, B.; Grove, T.: Funktionalisierung von Randzonen - Potentiale für die Blechmassivumformung. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): 4. Workshop Blechmassivumformung: Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen, (2019), Erlangen: FAU University Press, pp. 111-129
    • Pilz, F.; Merklein, M.: Comparison of Extrusion Processes in Sheet-Bulk Metal Forming for Prodcution of Filigree Functional Elements. In: CIRP Journal of Manufacturing Science and Technology (Edt.): 26(2019), published
    • Pilz, F.; Merklein, M.: Influence of component design in sheet-bulk metal forming. In: International Journal of Material Forming (Edt.): (2019), published
    • Vogel, M.; Schulte, R.; Freiburg, D.; Lechner, M.; Biermann, D.; Merklein, M.: Maßgeschneiderte Werkzeugoberflächen in einem flexibeln Walzprozess. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): 4. Workshop Blechmassivumformung, (2019), FAU University Press, pp. 89-108
    • Vogel, M.; Merklein, M.: Manufacturing of tailored blanks by orbital forming with a two-sided material thickening. In: Journal of Material Processing Technology, (2019), pp. 116491
    • Gutknecht, F.; Vogel, M.; Schulte, R.; Merklein, M.; Rosenbusch, D.; Koch, S.; Hübner, S.; Behrens, B.; Tekkaya, A.; Clausmeyer, T.: Comparison of Strain-path Indicators for Analysis of Processes in Sheet-bulk Metal Forming. In: Yannis Korkolis, Brad Kinsey, Marko Knezevic, and Nikhil Padhye (Edt.): Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, (2019), pp. 123-126
    • Vogel, M.; Merklein, M.: Flexible rolling of rotational symmetric tailored blanks with a two-sided thickness profile. In: Procedia Manufacturing, (2019), pp. 139-146
    • Hinz, L.; Schulte, R.; Pilz, F.; Kästner, M.; Reithmeier, E.: Quantifizierung der Werkzeugkondition bei der Blechmassivumformung durch faseroptische Streifenprojektion. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): 4. Workshop Blechmassivumformung, (2019), FAU University Press, pp. 69-87
    • Schulte, R.; Graser, M.; Merklein, M.: Enhancement of Forming Limits for Aluminum in Sheet-bulk Metal Forming by Local Laser Heat Treatment. In: Yannis Korkolis, Brad Kinsey, Marko Knezevic, and Nikhil Padhye (Edt.): Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, (2019), pp. 333-336
    • Schulte, R.; Merklein, M.: Manufacturing of functional aluminum components by using sheet bulk metal forming processes. In: Dimitrov, Dimiter; Hagedorn-Hansen, Devon; Von Leipzig, Konrad (Edt.): International Conference on Competitive Manufacturing (COMA 19) Proceedings, (2019), pp. 331-336
    • Schulte, R.; Lechner, M.; Merklein, M.: Fundamental analysis of the application of hybrid semi-finished products in sheet-bulk metal forming. In: 1st International Conference on Advanced Joining Processes AJP 2019, (2019), published on CD
    • , .; Bergmann, J. A. ; Krebs, E.; Biermann, D.; Wiederkehr, P.: Analytical and Simulation-Based Prediction of Surface Roughness for Micromilling Hardened HSS . In: J. Manuf. Mater. Process, 3(2019)3, pp. 1-17
    • Pulvermetallurgie der Hartmetalle - Schlüsseltechnologie für die spanende Fertigung und ihre Anwendungsgebiete. In: Danninger, H.; Sigl, L.; Broeckmann, C. (Edt.): Pulvermetallurgie- Schlüsseltechnologie für innovative Systemlösungen, 35(2019)1, Heimdall Verlag, pp. 3-27
    • Biermann, D.; , .; Michel, S.: Optimierung zerspanender Prozesse in kleinsten Dimensionen. In: maschinenbau - Das Schweizer Industriemagazin, 5(2019)1, pp. 18,21
    • Baumann, J.; Krebs, E.; Biermann, D.: Chatter avoidance in milling by using advanced cutting tools with structured functional surfaces. In: Modern Machining Science Journal, 1(2019)1, pp. 3019-3026
    • Freiburg, D.: Hochvorschubfräsen zur Strukturierung von Werkzeugoberflächen für die Blechmassivumformung. In: Prof. Dr.-Ing. Prof. h.c. Dirk Biermann (Edt.): Dissertation Freiburg, D., 1(2019)1, Essen: Vulkan Verlag GmbH, published
    • Söhngen, B.; Willner, K.: Parameter identification of strain rate dependent hardening for sheet metals. In: Proceedings in Applied Mathematics and Mechanics, 19(2019)1, published
    • Clausmeyer, T.; Nürnberger, F.; Gutknecht, F.; Isik, K.; Besserer, H.; Gerstein, G.; Wernicke, S.; Schulte, R.; Tekkaya, A.; Maier, H.: Analyse und Modellierung von Schädigung und Versagen in der Blechmassivumformung. In: 4. Workshop Blechmassivumformung : Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen, (2019), FAU University Press, submitted
    • Gutknecht, F.; , .; Schulte, R.; Merklein, M.; Rosenbusch, D.; Koch, S.; Hübner, S.; Behrens, B.; Tekkaya, A.; Clausmeyer, T.: Comparison of strain-path indicators for analysis of processes in sheet-bulk metal forming . In: Yannis Korkolis, Brad Kinsey, Marko Knezevic, and Nikhil Padhye (Edtr.) (Edt.): Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, (2019), pp. 123-126
    • Briukhanov, A.: Effect of Low-Temperature Annealings on the Change in the Level of Microdamage of Sheets of the Dual DP-600 Steel. In: Physics of Metals and Metallography, 120(2019), Springer, pp. 506-512
    • Bryukhanov, A.; Gerstein, G.; Volchok, N.; Bryukhanova, Z. A.; Nürnberger, F.: Effect of Low-Temperature Annealings on the Change in the Level of Microdamage of Sheets of the Dual DP-600 Steel. In: Physics of Metals and Metallography, 120(2019), Springer, pp. 506-512
    • Schewe, M.; Menzel, A.: Aspects of the Particle Finite Element Method applied to contact problems. In: Proc. Appl. Math. Mech., 19(2019)1, Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, pp. e201900403
    • Gutknecht, F.; Clausmeyer, T.: Analysis of strain-path change indicator for application in sheet-bulk metal forming. In: Forming Technology Forum 2019, (2019), published on CD
    • Metzner, S.; Reuter, T. ; Hausotte, T.: Evaluation of influences of thin lubricant on fringe projection measurements. In: Society of Photo-Optical Instrumentation Engineers (SPIE) (Edt.): Optical Technology and Measurement for Industrial Applications Conference, 11142(2019), Yokohama: spiedigitallibrary, pp. 106-109
    • Metzner, S.; Reuter, T.; Wirthmann, E.; Hausotte, T.: Bestimmung des Brechungsindex des Schmiermittels Beruforge 152DL unter Verwendung eines dafür entwickelten Dünnschichtnormals. In: AMA Service GmbH (Edt.): Tagungsband 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019, (2019), Nürnberg: VDE Verlag GmbH, pp. 406-411
    • Metzner, S.; Hausotte, T.: Automatic camera calibration and sensor registration of a multi-sensor fringe measurement system using hexapod positioning. In: Society of Photo-Optical Instrumentation Engineers (SPIE) (Edt.): Optical Measurement Systems for Industrial Inspection XI, 11056(2019), München: spiedigitallibrary, pp. 1-9
    • Beyer, F.: Numerische Untersuchungen zur Kontaktmechanik in der Blechmassivumformung, Dissertation(2019), published
    • Hinz, L.; Kästner, M.; Reithmeier, E.: Metal Forming Tool Monitoring Based on a 3D Measuring Endoscope Using CAD Assisted Registration. In: Sensors, 19(2019)9, Basel: MDPI, published
    • Lyu, T.; Löhnert, S.; Wriggers, P.: 3D Dynamic Crack under Cyclic Loading using XFEM: Numerical Treatment. In: J. Eberhardsteiner and M. Schöberl (Edt.): PAMM - Proc. Appl. Math. Mech., 19(2019)1, WILEY-VCH Verlag, published

    2018

    • Sauer, C.; Schleich, B.; Wartzack, S.: Deep learning in sheet-bulk metal forming part design. In: DS92: Proceedings of the DESIGN 2018 15th International Design Conference, (2018), pp. 2999-3010
    • Sauer, C.; Kügler, P.; Kestel, P.; Graf, M.; Göbel, K.; Niessen, C.; Schleich, B.; Wartzack, S.: Ein ontologiebasierter Ansatz zur Wissensrepräsentation für die smarte Produktentwicklung. In: Rieg, F.; Brökel, K.; Scharr, G.; Grote K.; Müller, N.; Lohrengel, A.; Nagarajah, A.; Corves, B. (Edt.): Tagungsband 16. Gemeinsames Kolloquium Konstruktionstechnik, (2018), pp. 294-305
    • Sauer, C.; Dworschak, F.; Schleich, B.; Wartzack, S.: Einsatz von Process-Mining zur Erweiterung der semantischen Produktbeschreibung. In: Krause, D.; Paetzold, K.; Wartzack S. (Edt.): Design for X. Beiträge zum 29. DfX-Symposium, (2018), pp. 227-238
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.: Inkrementelle Blechmassivumformung: Entwicklung einer neuen Fertigungstechnologie. In: wt Werkstattstechnik online, 108(2018), pp. 679-685
    • Löffler, M.; Engel, U.; Willner, K.; Beyer, F.; Merklein, M.: Investigation of the tribolgocal behaviour of microstructures for controlling the material flow in sheet-bulk metal forming. In: CIRP Journal of Manufacturing Science and Technology, 22(2018), pp. 66-75
    • Merklein, M.; Löffler, M.; Gröbel, D.; Henneberg, J.: Material flow control in sheet-bulk metal forming processes using blasted tool surfaces. In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F (Edt.): MATEC Web of Conferences, (2018), published
    • Krebs, E.; Wolf, M.; Biermann, D.; Tillmann, W.; Stangier, D.: High-quality cutting edge preparation of micromilling tools using wet abrasive jet machining process. In: Production Engineering, 12(2018), pp. 45-51
    • Besserer, H.; Rodman, D.: Micro-Scale Residual Stress Measurement Using Focused Ion Beam Techniques and Digital Image Correlation. In: QDE2018, International Conference on Quenching and Distortion Engineering, 27.11.-29.11.2018, (2018), Nagoya, Japan, pp. 32
    • Löffler, M.: Steuerung von Blechmassivumformprozessen durch maßgeschneiderte tribologische Systeme. In: Franke, J.; Hanenkamp, N.; Merklein, M.; Schmidt, M.; Wartzack, S. (Edt.): FAU Studien aus dem Maschinenbau, 308(2018), Erlangen: FAU University Press, pp. 1-166
    • Weikert, T.; Tremmel, S.: Wear Detection using Carbon-Based Sensor Coatings – a novel approach. In: Proceedings of The 18th Nordic Symposium on Tribology – NORDTRIB 2018, (2018), pp. 1-2
    • Grove, T.; Lucas, H.; Denkena, B.: Residual stresses in grinding of forming tools with toric grinding pins. In: Procedia CIRP, 71(2018), pp. 354-357
    • Caspari, M.; Landkammer, P.; Steinmann, P.: Illustration of an improved non-invasive form finding algorithm. In: 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, 1960(2018), Palermo, Italy: AIP Conference Proceedings, pp. 110003
    • Caspari, M.; Landkammer, P.; Steinmann, P.: A non-invasive node-based form finding approach with discretization-independent target configuration5(2018)1, Advanced Modeling and Simulation in Engineering Sciences, pp. 11
    • Landkammer, P.; Caspari, M.; Steinmann, P.: Improvements on a non-invasive, parameter-free approach to inverse form finding61(2018)4, Computational Mechanics, pp. 443-447
    • Sieczkarek, P.: Inkrementelle Blechmassivumformung. In: M. Kleiner (Edt.): Reihe: Dortmunder Umformtechnik, 99(2018), ISBN: 978-3-8440-6118-5: Shaker, published
    • Gutknecht, F.; Clausmeyer, T.; Wernicke, S.; Gies, S.; Tekkaya, A.: Vorstellung eines Lastpfadindikators für die Blechmassivumformung. In: 19. Simufact RoundTable, 17.05.2018 in Marbung, (2018), published
    • Hildenbrand, P.; Lechner, M.; Vogel, M.; Herrmann, H.; Merklein, M.: Orbital forming of tailored blanks with two-sided local material thickening. In: The International Journal of Advanced Manufacturing Technology, 97(2018), pp. 1-10
    • , .; Merklein, M.: Manufacturing of process adapted tailored blanks by a flexible rolling process using the aluminum alloy AA6016. In: Procedia Manufacturing, 15(2018), pp. 1224-1231
    • Vogel, M.; Merklein, M.: Oberflächenanalyse von Tailored Blanks hergestellt durch ein Taumelverfahren. In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Bruno Buchmayr (Edt.): XXXVII. Verformungskundliches Kolloquium, (2018), pp. 91-96
    • Biermann, D.; , .; Krebs, E.; Michel, S.; Jaeger, J.: Neue Entwicklungen für den produktiven Einsatz von Hartmetallwerkzeugen in kleinsten Dimensionen. In: Danninger, H.; Sigl, L.; Broeckmann, C. (Edt.): Pulvermetallurgie - neue Herausforderungen und neue Wege, 34(2018)1, Heimdall Verlag, pp. 135-155
    • Meijer, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.: Prediction of Feed-Rate Slowdowns in Precise Micromilling Processes. In: J. Manuf. Mater. Process, 2(2018)1, MPDI, pp. 1-14
    • Keitzel, G.; , .: Kräfte messen - Prozesse optimieren. In: Mikroproduktion, 4(2018)1, MIKROvent, pp. 40-44
    • Biermann, D.; , .; Ott: Präparation von Mikrofräswerkzeugen aus Vollhartmetall mit elastisch gebundenen Schleifkörpern. In: Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen, 68(2018)1, Vulkan Verlag GmbH, pp. 80-98
    • Landkammer, P.: Inverse Formfindungsverfahren zur Anwendung in der Umformtechnik. In: P. Steinmann, K. Willner (Edt.): Dissertation, Schriftenreihe Technische Mechanik, 28(2018), Erlangen: FAU Erlangen-Nürnberg, pp. 1-135
    • Isik, K.: Modelling and characterization of damage and fracture in sheet-bulk metal forming. In: Dortmunder Umformtechnik, 101(2018), Shaker Verlag, published
    • Gutknecht, F.; Gerstein, G.; Traphöner, H.; Clausmeyer, T.; Nürnberger, F.: Experimental setup to characterize flow-induced anisotropy of sheet metals. In: International deep drawing research group 37th annual conference (Edt.): IOP Conference Series: Materials Science and Engineering, 418(2018), IOP Publishing, published
    • Gerstein, G.; Briukhanov, A.; Gutknecht, F.; Volchok, N.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A.; Maier, H.: Evaluation of micro-damage by acoustic methods. In: 17th International Conference on Metal Forming (Edt.): Procedia Manufacturing, 15(2018), pp. 527-534
    • Isik, K.; Yoshida, Y.; Chen, L.; Clausmeyer, T.; Tekkaya, A.: Modelling of the blanking process of high-carbon steel using Lemaitre damage model. In: Comptes Rendus Mécanique, 346(2018)8, Elsevier, pp. 770-778
    • Schewe, M.; Menzel, A.: The Particle Finite Element Method for the modelling and simulation of solid body interactions. In: Proc. Appl. Math. Mech., 18(2018)1, Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, pp. e201800110
    • Metzner, S.; Ramesh R.; Müller A.; Hausotte, T.: Evaluation of reflection properties of sheet bulk metal formed parts by pixel wise analysis of camera images provided for triangulation measurement. In: ITG – Informationstechnische Gesellschaft im VDE (Edt.): ITG-Fachbericht 281 Sensonsoren und Messsysteme, 281(2018), Berlin: VDE Verlag GmbH, pp. 203-206
    • Metzner, S.; Hausotte, T.: Holistic dimensional measurement of sheet-bulk metal formed parts. In: Society of Photo-Optical Instrumentation Engineers (SPIE) (Edt.): Optical Metrology and Inspection for Industrial Applications V, 10819(2018), Bejing: spiedigitallibrary, pp. 1-9
    • Breitsprecher, T.: Entwicklung eines selbstlernenden Assistenzsystems zur automatischen Akquisition von konstruktionsrelevantem Fertigungswissen. In: Dissertation, T. Breitsprecher, 1(2018)449, VDI Verlag, pp. 192
    • Matthias, S.; Kästner, M.; Reithmeier, E.: A 3D measuring endoscope for hand-guided operation. In: Measurement Science and Technology, 29(2018)9, IOP Publishing, published
    • Matthias, S.: A flexible endoscopic structured light 3-D sensor: Design, models and image processing. In: Dissertation, (2018), Garbsen: PZH-Verlag, published
    • Pilz, F.; Merklein, M.: Numerical Research of Sheet-Bulk Metal Forming Using a Forward and a Lateral Extrusion Process. In: Proceedings 51st ICFG Plenary Meeting (Edt.): (2018), Ohio, USA: ICFG - International Cold Forging Group, pp. 221-232
    • Pilz, F.; Gröbel, D.; Merklein, M.: Investigation of Fatigue Strength of Tool Steels in Sheet-Bulk Metal Forming. In: AIP Conference Proceedings (Edt.): (2018), The 21st International ESAFORM Conference on Material Forming, accepted

    2017

    • Wartzack, S.; Sauer, C.; Küstner, C.: What does Design for Production mean? – From Design Guidelines to Self-learning Engineering Workbenches. In: Meyer A, Schirmeyer R, Vajna S (Edt.): Proceedings of the 11th International Workshop on Integrated Design Engineering, (2017), Magdeburg: Universität Magdeburg Lehrstuhl für Maschinenbauinformatik, pp. 93-102
    • Sauer, C.; Küstner, C.; Wartzack, S.: Einsatz von Deep Learning zur ortsaufgelösten Beschreibung von Bauteileigenschaften. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X. Beiträge zum 28. DfX-Symposium, (2017), Hamburg: TuTech Verlag, pp. 49-60
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.: Incremental Sheet-Bulk Metal Forming – Overview on the development of a new forming technology. In: Proceedings of the 50 th ICFG Plenary Meeting, (2017), Shanghai, China, pp. 196-205
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Improvement strategies for the formfilling in incremental gear forming processes. In: Production Engineering – Research and Development, 11(2017), Springer, pp. 623-631
    • Löffler, M.; Engel, U.; Andreas, K.; Merklein, M.: Identification of tribological mechanisms of shot peened steel surfaces for an application in sheet-bulk metal forming. In: Levesque, M. (Edt.): Proceedings of the 13th International Conference on Shot Peening, (2017), pp. 67-72
    • Freiburg, D.; Löffler, M.; Merklein, M.; Biermann, D.: Surface structuring of forming tool surfaces by high feed milling. In: WGP Jahreskongress, (2017), published
    • Merklein, M.; Andreas, K.; Kraus, M.; Löffler, M.; Pilz, F.: Development and launching of an application-oriented test rig for wear investigations in sheet-bulk metal forming. In: THE"A" Coatings, (2017), pp. 31-40
    • Tillmann, W.; Stangier, D.; Lopes-Dias, N.-F.; Biermann, D.; Krebs, E.: Adjustment of Friction by Duplex-Treated, Bionic Structures for Sheet-Bulk Metal Forming. In: Tribology International, 111(2017), pp. 9-17
    • Tillmann, W.; Stangier, D.; Lopes-Dias, N.-F.: Influence of PVD-PVD-treated, Bionic Surface Structures on the Wetting Behavior for Sheet-Bulk Metal Forming Tools. In: Journal of Bionic Engineering, 14(2017), pp. 520-531
    • Tillmann, W.; Stangier, D.; Hagen, L.; Schröder, P.; Krabiell, M.: Influence of WC grain size on the properties of PVD/HVOF duplex coatings. In: Surface and Coatings Technology, 328(2017), pp. 326-334
    • Besserer, H.; Rodman, D.: Fatigue Behavior of Sheet-Bulk Metal Formed Components. In: Materials Science and Technology 2017, 08.-12.10.2017, (2017), Pittsburgh, pp. 859–864
    • Besserer, H.; Rodman, D.: Ermüdungsverhalten blechmassivumgeformter Bauteile. In: Behrens, B.-A. (Edt.): Innovationspotenziale in der Umformtechnik. 22. Umformtechnisches Kolloquium Hannover, (2017), Garbsen: TEWISS, pp. 221
    • Caspari, M.; Landkammer, P.; Steinmann, P.: Inverse form finding with H-adaptivity and an application to a notch stamping process. In: Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017(2017), Barcelona; Spain, pp. 88-99
    • Gerstein, G.; Isik, K.; Sieczkarek, P.; Ewerth, J.; Tekkaya, A.; Clausmeyer, T.; Nürnberger, F.: MICROSTRUCTURAL CHARACTERIZATION AND SIMULATION OF DAMAGE FOR GEARED SHEET COMPONENTS. In: Journal of Physics: Conference Series 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming 2–6 July 2017, Munich, Germany, 896(2017), published
    • Kirchen, I.; Vogel-Heuser, B.; Hildenbrand, P.; Schulte, R.; Lechner, M.; Vogel, M.; Merklein, M.: Data-driven Model Development for Quality Prediction in Forming Technology. In: 15th IEEE International Conference on Industrial Informatics (INDIN), (2017), pp. 775-780
    • Schulte, R.; Frey, P.; Hildenbrand, P.; Vogel, M.; Betz, C.; Lechner, M.; Merklein, M.: Data-Based Control of A Multi-Step Forming Process. In: Journal of Physics: Conference Series, (2017), pp. 012037
    • Schulte, R.; Hildenbrand, P.; Vogel, M.; Lechner, M.; Merklein, M.: Analysis of fundamental dependencies between manufacturing and processing Tailored Blanks in sheet-bulk metal forming processes. In: Procedia Engineering, (2017), pp. 305-310
    • Schulte, R.; Lechner, M.; Vogel, M.; Hildenbrand, P.; Merklein, M.: Umformtechnische Herstellung von Funktionsbauteilen aus Tailored Blanks durch Blechmassivumformverfahren. In: 22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017, (2017), published
    • Vogel, M.; Lechner, M.; Hildenbrand, P.; Schulte, R.; Merklein, M.: Manufacturing of tailored blanks by flexible rolling and its application in a sheet-bulk metal forming process. In: Wieland (Edt.): Proceedings SCT2017, (2017), Verlag Stahleisen GmbH, published on CD
    • Schulte, R.; Hildenbrand, P.; Lechner, M.; Merklein, M.: Designing, manufacturing and processing of Tailored Blanks in a sheet-bulk metal forming process. In: Procedia Manufacturing, (2017), pp. -
    • Krebs, E.: Simulationsgestützte Mikrofräsbearbeitung gehärteter Werkzeugstähle zur Herstellung filigraner Formelemente und funktionaler Oberflächenstrukturen. In: Prof. Dr.-Ing. Prof. h.c. Dirk Biermann (Edt.): Dissertation Krebs, E., 1(2017)1, Essen: Vulkan Verlag GmbH, published
    • Landkammer, P.; Söhngen, B.; Steinmann, P.; Willner, K.: On gradient-based optimization strategies for inverse problems in metal forming. In: GAMM-Mitteilungen, 40(2017)1, Wiley-VCH Verlag, pp. 27-50
    • Söhngen, B.; Willner, K.: Identification of nonlinear kinematic hardening parameters for sheet metal from biaxial loading tests. In: Oñate E., Owen D.R.J. , Peric D. , Chiumenti M. (Edt.): XIV International Conference on Computational Plasticity. Fundamentals and Applications, (2017), pp. 373-384
    • Härtel, M.; Pfeiffer, S.; Schmaltz, S.; Söhngen, B.; Kulawinski, D.; Willner, K.; Henkel. S.; Biermann, H.; Wagner, M.F.-X.: On the identification of an effective cross section for a cruciform specimen. In: Strain, 54(2017)1, published
    • Gerstein, G.; Clausmeyer, T.; Gutknecht, F.; Tekkaya, A.; Nürnberger, F.: Analysis of dislocaton structures in ferritic and dual phase steels regarding continuous and discontinuous loading path. In: The Minerals, Metals & Materials Society (Edt.): TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings, (2017), Springer, published
    • Gutknecht, F.; Isik, K.; Clausmeyer, T.; Tekkaya, A.: Comparison of gurson and lemaitre model in the context of blanking simulation of high stregth steel. In: E. Onate, D.R.J. Owen, M. Chiumenti (Edt.): Proceedings of XIV International Conference on Computational Plasticity, (2017), published
    • Gerstein, G.; Besserer, H.; Nürnberger, F.; Luis Antonio Barrales-Mora; Lasar S. Shvindlerman; Yuri Estrin; Maier, H.: Formation and growth of voids in dual-phase steel at mircrsocale and nanoscale level. In: Journal of Materials Science, 52(2017), Springer, pp. 4234-4243
    • Berthelsen, R.; Wilbuer, H.; Menzel, A.: Computational modelling of wear and the effective frictional behaviour of elastoplastic tools. In: Proceedings of the 7th GACM Colloquium on Computational Mechanics, 7(2017), Institute for Structural Mechanics, University of Stuttgart, http://dx.doi.org/10.18419/opus-9334, pp. 786-789
    • Metzner, S.: Ganzheitliche dimensionelle Messung von blechmassivumgeformten Bauteilen. In: Technisches Messen (Edt.): Technisches Messen, 84(2017)9, Oldenbourg: De Gruyter , pp. 600-608
    • Metzner, S.; Ramesh, R.; Hausotte, T.: Local histogram equalization and homomorphic filtering to improve wide-angle stereo disparity computation. In: Längle, Thomas, Puente León, Fernando, Heizmann, Michael (Edt.): Forum Bildverarbeitung 2018, (2017), Karlsruhe: KIT Scientific Publishing, pp. 265-276
    • Loderer, A.: Holistische, fertigungsnahe, mehrskalige Messung blechmassivumgeformter Bauteile. In: Tino Hausotte (Edt.): Schriftenreihe des Lehrstuhls für Fertigungsmesstechnik, (2017), Aachen: Shaker Verlag, published
    • Matthias, S.; Kästner, M.; Reithmeier, E.: Fiber-optic fringe projection with crosstalk reduction by adaptive pattern masking. In: Proceedings of SPIE, 10117(2017), SPIE Photonics West, pp. 101170A
    • Matthias, S.; Kästner, M.; Reithmeier, E.: Pattern sequences for fast absolute phase retrieval with application in the handheld operation of structured light sensors. In: Ilmenau Scientific Colloquium (Edt.): Engineering for a Changing World: Proceedings, 59(2017), Ilmenau, published
    • Merklein, M.; Andreas, K.; Kraus, M.; Löffler, M.; Pilz, F.: Development and launching of an application-oriented test rig for wear investigations in sheet-bulk metal forming. In: THE"A" Coatings (Edt.): (2017), pp. 31-40

    2016

    • Loderer, A.; Hausotte, T.: Qualification concept for optical multi-scale multi-sensor systems. In: Journal of Sensors and Sensor Systems JSSS, 5(2016)1, pp. 1-8
    • Beese, S.; Beyer, F.; Blum, H.; Isik, K.; Kumor, D.; Rademacher, A.; Tekkaya, A.; Willner, K.; Wriggers, P.; Zeller, S.; Löhnert, S.: Simulation of Sheet-Bulk Metal Forming Processes with Simufact.forming using User-Subroutines. In: ESAFORM (Edt.): (2016), Nantes, Frankreich, accepted
    • Merklein, M.; Lechner, M.; Gröbel, D.; Löffler, M.; Schneider, T.; Schulte, R.; Hildenbrand, P.: Innovative approaches for controlling the material flow in sheet-bulk metal forming processes. In: Manufacturing Review, 3(2016)2, pp. 1-17
    • Landkammer, P.; Steinmann, P.: A non-invasive heuristic approach to shape optimization in forming. In: Computational Mechanics, 57(2016)2, pp. 169-191
    • Rademacher, A.: NCP-function based dual weighted residual error estimators for Signorini's problem. In: SIAM Journal on Scientific Computing, 38(2016)3, pp. A1743-1769
    • Gerstein, G.; Nürnberger, F.; Maier, H.: Evolution of void shape anisotropy in deformed bcc steels. In: TMS (Edt.): TMS 145. Annual Meeting, Proceedings of the EPD Congress, (2016), Hoboken, New Jersey: John Wiley & Sons, Inc., pp. 173-179
    • Isik, K.; Gerstein, G.; , .; Clausmeyer, T.; Nürnberger, F.; Maier, H.; Tekkaya, A.: Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching. In: Procedia Structural Integrity, 2(2016), pp. 673-680
    • Denkena, B.; Grove, T.; Lucas, H.: Influences of Grinding with Toric CBN Grinding Tools on Surface and Subsurface of 1.3344 PM Steel. In: Journal of Materials Processing Technology, 229(2016), pp. 541-548
    • Beyer, F.; Willner, K.: A constitutive friction law for sheet-bulk metal forming. In: Tribology Online (Edt.): 11(2016)5, pp. 614-622
    • Landkammer, P.; Schneider, T.; Schulte, R.; Steinmann, P.; Merklein, M.: A non-invasive form finding method with application to metal forming. In: Production Engineering (Special Issue), 10(2016)1, pp. 93-102
    • Hildenbrand, P.; Lechner, M.; Merklein, M.: A new strategy for manufacturing tailored blanks by a flexible rolling process. In: Materials Science Forum, 854(2016), pp. 99-105
    • Löffler, M.; Andreas, K.; Engel, U.; Weikert, T.; Tremmel, S.; Wartzack, S.; Stangier, D.; Tillmann, W.; Merklein, M.: Surface modifications for adaption of tribological conditions in sheet-bulk metal forming processes. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Edt.): Proceedings THE "A" Coatings, (2016), PZH Verlag, pp. 13-20
    • Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.: Influence of PVD-coating manufacturing steps on the subsurface integrity of hardened and soft AISI M3:2 high speed steel. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Edt.): Proceedings THE "A" Coatings, (2016), PZH Verlag, pp. 23-30
    • Tillmann, W.; Stangier, D.; Denkena, B.; Grove, T.; Lucas, H.: Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools. In: Special Issue: Production Engineering, 10(2016)1, Springer, pp. 17-24
    • Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner, S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B.: Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process. In: Production Engineering, 10(2016)1, DOI 10.1007/s11740-015-0647-2, pp. 51-61
    • Gerstein, G.; Bruchanov, A. A.; Dyachok, D. V.; Nürnberger, F.: The effect of texture in modeling deformation processes of bcc steel sheets. In: Materials Letters, 164(2016), pp. 356-359
    • Kersting, P.; Gröbel, D.; Merklein, M.; Sieczkarek, P.; Wernicke, S.; Tekkaya, A.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; Löffler, M.; Beyer, F.; Willner, K.: Experimental and numcerial analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming. In: Production Engineering, 10(2016)1, Springer, pp. 37-50
    • Besserer, H.; Dalinger, A.; Rodman, D.; Nürnberger, F.; Hildenbrand, P.; Merklein, M.; Maier, H.: Induction heat treatment of sheet-bulk metal formed parts assisted by water-air spray cooling. In: Steel Research International, 87(2016)9, pp. 1220-1227
    • Besserer, H.; Hildenbrand, P.; Gerstein, G.; Rodman, D.; Nürnberger, F.; Merklein, M.; Maier, H.: Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes. In: Journal of Materials Engineering and Performance, 25(2016)3, pp. 1136-1142
    • Besserer, H.; Gerstein, G.; Dalinger, A.; Jablonik, L.; Rodman, D.; Nürnberger, F.: Ion Beam Processing in the Sample Preparation for the Analysis of Ductile Damage in Deep Drawing Steels. In: Praktische Metallographie, 53(2016)4, pp. 221-236
    • Besserer, H.; Gerstein, G.; Maier, H.; Nürnberger, F.: Specimen Preparation by Ion Beam Slope Cutting for Characterization of Ductile Damage by Scanning Electron Microscopy. In: Microscopy Research and Technique, 79(2016)4, pp. 321-327
    • Weikert, T.; Tremmel, S.: Influence of bias voltage and layer thickness variation on mechanical properties and tribological behavior of a-C:H:W multilayer coatings. In: Proceedings of the 17th Nordic Symposium on Tribology - NordTrib 2016, (2016), published on CD
    • Gröbel, D.; Schulte, R.; Hildenbrand, P.; Lechner, M.; Engel, U.; Sieczkarek, P.; Wernicke, S.; Tekkaya, A.; Behrens, B.; Hübner, S.; Vucetic, M.; Koch, S.; Merklein, M.: Manufacturing of functional elements by sheet-bulk metal forming processes. In: Production Engineering, 10(2016)1, pp. 63-80
    • Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; , .; Clausmeyer, T.; Nürnberger, F.; Vucetic, M.; Koch, S.; Hübner, S.; Behrens, B.; Tekkaya, A.; Merklein, M.: Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming. In: Production Engineering, 10(2016)1, pp. 5-15
    • Beese, S.; Löhnert, S.; Wriggers, P.: Modeling of Fracture in Polycrystalline Materials. In: Formaggia, Luca, Pedregal, Pablo (Edt.): SEMA SIMAI special issue on extended discretisation methods, (2016), Berlin, New York, Heidelberg: Springer, accepted
    • Löffler, M.; Andreas, K.: Einfluss des Schmierstoffs auf die Werkstückqualität in der Blechmassivumformung. In: Buchmayr, B. (Edt.): Tagungsband XXXV. Verformungskundliches Kolloquium, (2016), accepted
    • Behrens, B.; Bouguecha, A.; Vucetic, M.; Chugreev, A.; , .: Advanced Finite Element Analysis of Die Wear in Sheet-Bulk Metal Forming Processes. In: ESAFORM (Edt.): (2016), Nante, Frankreich, accepted
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Martins, P. A. F.; Tekkaya, A.: Incipient and repeatable plastic flow in incremental sheet-bulk forming of gears. In: International Journal of Advanced Manufacturing Technology, (2016)86, DOI 10.1007/s00170-016-8442-6, pp. 3091-3100
    • Merklein, M.; Hagenah, H.: Introduction to sheet-bulk metal forming. In: Production Engineering, 10(2016)1, pp. 1-3
    • Löffler, M.; Andreas, K.; Engel, U.; Merklein, M.: Applicability of blasted blanks for adaption of tribological conditions in sheet-bulk metal forming. In: Procedia CIRP, 45(2016), pp. 239-242
    • Andreas, K.; Henneberg, J.; Koch, J.; Merklein, M.: Local adjustment of surface integrity of forming tools by adaptation of tool making process. In: Procedia CIRP, 45(2016), pp. 339-342
    • Löhnert, S.; Beese, S.: A regularization technique for the XFEM: extension to finite deformations, inelastic material behaviour and multifield problems. In: Proceedings in Applied Mathematics and Mechanics, (2016), Wiley, submitted
    • Breitsprecher, T.; Küstner, C.; Wartzack, S.: Development of a self-learning assistance system for the use within sheet-bulk metal forming. In: Knowledge-Based Systems, (2016), Elsevier, submitted
    • Bryukhanov, A. A.; Gerstein, G.; Dyachok, D. A.; Nürnberger, F.: Effect of deformation texture on the anisotropy of elasticity and damage of two-phase steel sheets. In: The Physics of Metals and Metallography, 117(2016)7, pp. 719-724
    • Isik, K.; Wernicke, S.; Silva, M.B.; Martins, P.A.F.; Tekkaya, A.: Failure by fracture in sheet–bulk metal forming. In: Journal of Strain Analysis; DOI: 10.1177/0309324716639773, 51(2016)5, pp. 387-394
    • Isik, K.; Gerstein, G.; Clausmeyer, T.; Nürnberger, F.; Tekkaya, A.; Maier, H.: Evaluation of Void Nucleation and Development during Plastic Deformation of Dual-Phase Steel DP600. In: Steel Research Int., DOI: 10.1002/srin.201500483, (2016), published
    • Gerstein, G.; Clausmeyer, T.; Isik, K.; Nürnberger, F.; Tekkaya, A.; Bruchanov, A. A.; Maier, H.: Experimental analysis of anisotropic damage in dual phase steel by resonance measurement. In: International Journal of Damage Mechanics, (2016), published
    • Küstner, C.; Beyer, F.; Kumor, D.; Loderer, A.; Wartzack, S.; Willner, K.; Blum, H.; Rademacher, A.; Hausotte, T.: Simulation-based development of Pareto-optimized tailored blanks for the use within sheet-bulk metal forming. In: Marjanovic, D.; Storga, M.; Pavkovic, N.; Bojcetic, N.; Skec, S. (Edt.): DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, (2016), Design Society, pp. 291-300
    • Sieczkarek, P.; Wernicke, S.; Weddeling, C.; Martins, P. A. F.; Tekkaya, A.: Local Forming of Gears by Indentation of Sheets. In: Journal of Engineering Manufacture, (2016), DOI: 10.1177/0954405416654190, accepted
    • Gröne, M.; Rosenbusch, D.; Krimm, R.; Behrens, B.: Electromagnetic System to Improve the Manufacturing Accuracy at the Presence of Horizontal Process Forces. In: Production Engineering, 1140(2016), pp. 369-376
    • Besserer, H.; Boiarkin, V.; Rodman, D.; Nürnberger, F.: Qualifying Electrically Conductive Cold Embedding-Media for Scanning Electron Microscopy. In: Metallography, Microstructure and Analysis, 5(2016)4, pp. 332-341
    • M.B. Silva; Isik, K.; Tekkaya, A.; A.G. Atkins; P.A.F. Martins: Fracture toughness and failure limits in sheet metal forming. In: Journal of Materials Processing Technology, 234(2016), pp. 249-258
    • Tillmann, W.; Stangier, D.; Laemmerhirt, I.-A.; Biermann, D.; Freiburg, D.: Investigation of the tribological properties of high-feed milled structures and Cr-based hard PVD-coatings. In: Vacuum, 131(2016), pp. 5-13
    • Landkammer, P.; Steinmann, P.: Case study on the influence of kinematic hardening to a parameter-free and non-invasive form finding approach. In: K. Saanouni (Edt.): MATEC Web of Conferences - Proceedings of the 12th Int Numiform Conference , 80(2016)11, pp. 1-6
    • Beyer, F.; Löffler, M.; Willner, K.; Engel, U.; Merklein, M.: Enhancement of a Constitutive Friction Law by Considering Plastic Smoothing of Rough Surfaces in Dependency on the Bulk Stresses. In: Tribology in Industry, 38(2016)2, pp. 163-175
    • Behrens, B.; Krimm, R.; Gröne, M.: Reduktion des Maschineneinflusses auf die Bauteilqualität bei Horizontalbelastungen. In: Europäische Forschungsgesellschaft für Blechverarbeitung (Edt.): Tagungsband, (2016)42, pp. 183-193
    • Matthias, S.; Kästner, M.; Reithmeier, E.: Comparison of LASER and LED illumination for fiber-optic fringe projection. In: Proc. SPIE 9899, (2016), pp. 989905
    • Matthias, S.; Kästner, M.; Reithmeier, E.: In-situ fringe projection using coherent image fibers. In: DGaO Proceedings 2016, (2016), accepted
    • Tillmann, W.; Stangier, D.; Schröder, P.: Investigation and Optimization of the tribo-mechanical Properties of CrAlCN Coatings using Design of Experiments. In: Surface and Coatings Technology, 308(2016), pp. 147-157
    • Sieczkarek, P.; Silva, C. M. A.; Wernicke, S.; Tekkaya, A.; Martins, P. A. F.: Mechanical Characterization of Materials for Sheet-Bulk Metal Forming. In: RTME Conference, July 11-13, (2016), Aveiro, Portugal, in print
    • Pösch, A.; Schlobohm, J.; Matthias, S.; Reithmeier, E.: Rigid and flexible endoscopes for three dimensional measurement of inside machine parts using fringe projection. In: Optics and Lasers in Engineering, (2016), published
    • Löffler, M.; Engel, U.; Schulte, R.; Gröbel, D.; Krebs, E.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Weikert, T.; Wartzack, S.; Tremmel, S.; Lucas, H.; Denkena, B.; Merklein, M.: Tribological measures for controlling material flow in sheet-bulk metal forming. In: Production Engineering, 10(2016), pp. 459-470
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Wear Behavior of Tribologically Optimized Tool Surfaces for Incremental Forming Processes. In: Tribology International, 104(2016), pp. 64 - 72
    • Küstner, C.; Mitsch, J.; Hegwein, M.; Meintker, N.; Mönks, K.; Fröhlich, M.; Wartzack, S.: Zustandsdiagnose von Maschinen im Kontext von Industrie 4.0 unter Einsatz von Data-Mining Methoden. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X - Beiträge zum 27. DFX-Symposium 2016, (2016), Hamburg: TuTech, pp. 169-180
    • Weikert, T.; Tremmel, S.; Wartzack, S.: Gezielte Anpassung lokaler Reibungszustände unter Einsatz wolframmodifizierter amorpher Kohlenstoffschichten. In: Bartz, Wilfried J. (Edt.): Tribologie und Schmierungstechnik, 63(2016)5, Renningen: Expert Verlag GmbH, pp. 5-11
    • Wernicke, S.; Sieczkarek, P.; Martins, P. A. F.; Tekkaya, A.: Local Sheet Thickening by In-Plane Swaging. In: International Journal of Mechanical Sciences, (2016), DOI: 10.1016/j.ijmecsci.2016.10.003, accepted
    • Loderer, A.; Hausotte, T.: Ganzheitliche dimensionelle Messung von blechmassivumgeformten Bauteilen. In: Stefan Zimmermann (Edt.): XXX. Messtechnisches Symosium 2016, (2016), Berlin: DE Gruyter, pp. 133-140
    • Schulte, R.; Schneider, T.; Lechner, M.; Merklein, M.: Interaction of various functional elements in thin-walled cups formed by a sheet-bulk metal forming process. In: K. Saanouni (Edt.): NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes , MATEC Web Conf. , (2016), pp. 07003
    • Berthelsen, R.; Wilbuer, H.; Holtermann, R.; Menzel, A.: Computational modelling of wear – application to structured surfaces of elastoplastic tools. In: GAMM-Mitt., 39(2016)2, Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 210-228
    • Lizunkova, Y.: Lokales atmosphärisches Plasmanitrieren von Stählen zur Verbesserung der Oberflächeneigenschaften. Dissertation, Berichte aus dem IW 01/2016(2016), Garbsen: PZH Verlag, published
    • Randzonenmodifikation von Fe-Basiswerkstoffen auf Grundlage einer Lichtbogenbehandlung. Dissertation, Universität Paderborn(2016), Paderborn, published

    2015

    • Koch, S.; Vucetic, M.; Hübner, S.; Behrens, B.: Superimposed oscillating and non-oscillating ring compression tests for sheet-bulk metal forming technology. In: Advanced Materials Research, 794(2015), Trans Tech Publications, Switzerland, pp. 89-96
    • Merklein, M.; Löffler, M.; Schneider, T.: Plastic flow and its control in sheet-bulk metal forming of thin-walled functional components. In: CIRP Annals - Manufacturing Technology, 64(2015)1, pp. 248-248
    • Zhao, R.; Weikert, T.; Tremmel, S.; Wartzack, S.: Tribological behaviour of tungsten doped hydrogenated amorphous carbon coatings deposited under various bias voltages and argon flows. In: Book of Abstracts of the 11th Coatings Science International 2015, (2015), pp. 140-144
    • Freiburg, D.; Biermann, D.; Hense, R.; Tillmann, W.; Stangier, D.: Influence of Surface Modifications on Friction, Using High-Feed Milling and Wear Resistant PVD-Coating for Sheet-Metal Forming Tools. In: Key Engineering Materials, 639(2015), pp. 275-282
    • Hense, R.; Kersting, P.; Vierzigmann, U.; Löffler, M.; Biermann, D.; Merklein, M.; Wels, C.: High-Feed Milling of Tailored Surfaces for Sheet-Bulk Metal Forming Tools. In: Production Engineering, 9(2015)2, pp. 215-223
    • Kersting, P.; Krebs, E.; Odendahl, S.; Simone Carmignato; Filippo Zanini; Tobias Siebrecht: Analysing machining errors resulting from a micromilling process using CT measurement and process simulation. In: 4M/ICOMM15 Annoni, A.; Fassi, I.; Wiens, G.J; Dimov, S. (Hrsg.) (Edt.): Proceedings of the 4M/ICOMM2015 Conference, (2015), pp. 137-140
    • Gerstein, G.; Besserer, H.; Nürnberger, F.; Maier, H.: Comparison of the Mechanisms of Void Formation by Plastic Deformation in Single- and Dual-Phase BCC- Steels. In: 2015 TMS Annual Meeting & Exhibition, Proceedings Characterization of Minerals, Metals and Materials, (2015), Hoboken, New Jersey: Wiley, pp. 75-81
    • Schneider, T.; Merklein, M.: Sheet-bulk metal forming - potential and challenges of a new class of forming processes. In: Khan, A.; Yu, H.Y. (Edt.): Proceedings of PLASTICITY ’15: The Twenty First International Symposium on Plasticity and its Current Applications, (2015), pp. 169-171
    • Rademacher, A.; Schröder, A.: Dual weighted residual error control for frictional contact problems. In: Computational Methods in Applied Mathematics, 15(2015)3, pp. 391-414
    • Landkammer, P.; Steinmann, P.: Application of a non-invasive form-finding algorithm to the ring compression test with varying friction coefficients. In: Key Engineering Materials, 651(2015), pp. 1381-1386
    • Behrens, B.; Hübner, S.; Vucetic, M.; Koch, S.; Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.; Hausotte, T.; Loderer, A.: Prozessauslegung und Untersuchung von geschliffenen und CrAlN / CrAlCN-beschichteten Werkzeugoberflächen mittels schwingungsüberlagertem Flachstauchversuch für die Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 173 - 192
    • Beyer, F.; Blum, H.; Kumor, D.; Rademacher, A.; Willner, K.; Schneider, T.: Experimental and simulative investigations of tribology in sheet-bulk metal forming. In: Key Engineering Materials, 639(2015), pp. 283-290
    • Löffler, M.; Schneider, T.; Vierzigmann, U.; Engel, U.; Merklein, M.: Locally Adapted Tribological Conditions as a Method for Influencing the Material Flow in Sheet-Bulk Metal Forming Processes. In: Key Engineering Materials, 639(2015), pp. 267-274
    • Schmaltz, S.: Inverse Materialparameteridentifikation von Blechwerkstoffen für ein anisotropes elasto-plastisches Materialmodell bei finiten Deformationen . In: P. Steinmann, K. Willner (Edt.): Dissertation, Schriftenreihe Technische Mechanik, 14(2015), Erlangen: FAU Erlangen-Nürnberg, pp. 1-171
    • Hildenbrand, P.; Schneider, T.; Merklein, M.: Flexible Rolling of Process Adapted Semi-finished Parts and its Application in a Sheet-Bulk Metal Forming Process.. In: Key Engineering Materials, 639(2015), pp. 259-266
    • Gröbel, D.; Hildenbrand, P.; Engel, U.; Merklein, M.: Influence of tailored blanks on forming of cold forged functional elements in a sheet bulk metal forming process. In: Metec, Stahl-Institut VDEh (Edt.): Proceedings METEC & 2nd ESTAT, (2015), published on CD
    • Löffler, M.; Freiburg, D.; Gröbel, D.; Loderer, A.; Matthias, S.; Stangier, D.; Weikert, T.: Untersuchung von Tailored Surfaces hinsichtlich ihres tribologischen Einflusses auf Prozesse der Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 131-146
    • Landkammer, P.; Söhngen, B.; Loderer, A.; Krebs, E.; Steinmann, P.; Willner, K.; Hausotte, T.; Kersting, P.; Biermann, D.: Experimentelle Verifizierung eines Benchmark-Umformprozesses. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 91-110
    • Hildenbrand, P.; Sieczkarek, P.; Matthias, S.; Löffler, M.; Besserer, H.; Merklein, M.; Tekkaya, A.; Reithmeier, E.; Maier, H.: Inkrementelles Umformen dünnwandiger Funktionsbauteile unter Einsatz prozessangepasster Halbzeuge durch Verfahren der Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 149-170
    • Breitsprecher, T.; Sauer, C.; Sperber, C.; Wartzack, S.: Design-for-manufacture of sheet-bulk metal formed parts. In: Weber, C.; et al. (Edt.): DS80-4 Proceedings of the 20th International Conference on Engineering Design (ICED15), (2015), Mailand: Design Society, pp. 183-192
    • Zeller, S.; Beese, S.; Gerstein, G.; Isik, K.; Löhnert, S.; Nürnberger, F.; Wriggers, P.; Maier, H.; Tekkaya, A.: Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 Bauteilen. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 113-128
    • Matthias, S.; Ohrt, C.; Pösch, A.; Kästner, M.; Reithmeier, E.: Single image geometry inspection using inverse endoscopic fringe projection. In: ACTA IMEKO, 4(2015)2, pp. 4-9
    • Behrens, B.; Bouguecha, A.; Vucetic, M.; Hübner, S.; , .; Koch, S.: Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. In: Key Engineering Materials, 651(2015), Trans Tech Publications, Switzerland, pp. 1153-1158
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying Measuring Systems by using Six Sigma. In: Key Engineering Materials, 637(2015), pp. 37-43
    • Loderer, A.; Timmermann, M.; Matthias, S.; Kästner, M.; Schneider, T.; Hausotte, T.; Reithmeier, E.: Measuring systems for sheet-bulk metal forming. In: Key Engineering Materials, 639(2015), pp. 291-298
    • Landkammer, P.; Loderer, A.; Krebs, E.; Söhngen, B.; Steinmann, P.; Hausotte, T.; Kersting, P.; Biermann, D.; Willner, K.: Experimental verification of a benchmark forming simulation. In: Key Engineering Materials, 639(2015), pp. 251-258
    • Loderer, A.; Timmermann, M.; Hausotte, T.: Methodical approach for selecting an appropriate sensor of a multi-sensor fringe projection system.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
    • Timmermann, M.; Weinert, B.; Schuler, A.; Loderer, A.; Hausotte, T.: Fibre-optical 3-D measurement of highly curved free-form surfaces.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
    • Löffler, M.; Gröbel, D.; Andreas, K.; Engel, U.; Merklein, M.: Analysis of Effectivness of Locally Adapted Tribological Conditions for Improving Product Quality in Sheet-Bulk Metal Forming. In: Applied Mechnics and Materials, 794(2015), pp. 81-88
    • Rademacher, A.: Balancing discretization and numerical error for coupled parabolic hyperbolic problems using the dual weigthed residual method with application to thermoelasticity. In: Ergebnisberichte Angewandte Mathematik (Edt.): Fakultät für Mathematik, TU Dortmund, (2015)516, published
    • Rademacher, A.: Mesh and model adaptivity for frictional contact problems. In: Ergebnisberichte Angewandte Mathematik (Edt.): Fakultät für Mathematik, TU Dortmund, (2015)515, published
    • Landkammer, P.; Steinmann, P.: A global damping factor for a non-invasive form finding algorithm. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): Proc. Appl. Math. Mech., 15(2015)1, Wiley, pp. 327-328
    • Matthias, S.; Kästner, M.; Reithmeier, E.: Evaluation of system models for an endoscopic fringe projection system. In: MEASUREMENT, 73(2015), Elsevier, pp. 239-246
    • Weikert, T.; Tremmel, S.; Wartzack, S.: Gezielte Anpassung lokaler Reibungszustände unter Einsatz wolframmodifizierter amorpher Kohlenstoffschichten (a-C:H:W). In: Gesellschaft für Tribologie e.V. (Edt.): 56. Tribologie-Fachtagung. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Band 1, (2015), Göttingen, pp. 24/1-24/10
    • Loderer, A.; Hartmann, W.; Hausotte, T.: Calibration Concept for Dimensional Measurements with Optical Multiscale Multi-Sensor Systems. In: AMA Service GmbH (Edt.): AMA Conferences 2015 - SENSOR 2015 and IRS² 2015, (2015), Wunstdorf: AMA Service GmbH, pp. 447-452
    • Stangier, D.; Tillmann, W.; Krebs, E.; Kersting, P.; Biermann, D.; Hagen, L.: Wear Behavior of Bio-inspired and Technologically Structured HVOF Sprayed NiCrBSiFe Coatings. In: Surface and Coatings Technology, 280(2015), pp. 16-26
    • Matthias, S.; Kästner, M.; Reithmeier, E.: Endoscopic fringe projection for in-situ inspection of a sheet-bulk metal forming process. In: Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, (2015), pp. 952513
    • Freiburg, D.; Kersting, P.; Biermann, D.: Simulation and Structuring of Complex Surface Areas using High Feed Milling. In: 8th Iinternatinal Conference and Exhibition on Design and Production of Machines and Dies/Molds, 8(2015), Kusadasi, Aydin, TURKEY, pp. 93-98
    • Gerstein, G.; Besserer, H.; Jablonik, L.; Dalinger, A.; Nürnberger, F.; Höpner, A.: Präparation plastisch umgeformter Stahlproben durch Ionenstrahlbearbeitung für die Untersuchung von duktiler Schädigung. In: Schneider, G.; Zschech, E.; Petzow, G. (Edt.): Fortschritte in der Metallographie. Berichte der 49. Metallographie-Tagung Dresden, 16. bis 18. September 2015, 47(2015), Sankt Augustin: DGM Inventum, pp. 153-158
    • Söhngen, B.; Willner, K.: Inverse Parameter Identification for Orthotropic Elasto-Plastic Sheet-Steel. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): Special Issue: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 15(2015)1, Weinheim: WILEY-VCH Verlag GmbH & Co, pp. 361-362
    • Beyer, F.; Willner, K.: Determination of a Constitutive Friction Law Using an Elastic-Plastic Half-Space Model. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): Proc. Appl. Math. Mech., 15(2015)1, Wiley, pp. 173-174
    • Beyer, F.; Hauer, F.; Willner, K.: Development of a Constitutive Friction Law based on the Frictional Interaction of Rough Surfaces37(2015)4, pp. 400-412
    • Zillmann, B.; Wagner, M. F.-X.; Schmaltz, S.; Schmidl, E.; Lampke, T.; Willner, K.; Halle, T.: In-plane biaxial compression and tension testing of thin sheet materials. In: International Journal of Solids and Structures, 66(2015), pp. 111-120
    • Q. Yin; Soyarslan, C.; Isik, K.; Tekkaya, A.: A grooved in-plane torsion test for the investigation of shear fracture in sheet materials. In: International Journal of Solids and Structures, 66(2015), pp. 121-132
    • Isik, K.; Silva, M.B.; Atkins, A.G.; Tekkaya, A.; Martins. P.A.F.: A New test for determining fracture thoughness in plane stress in mode II . In: Journal of Strain Analysis for Engineering Design, 50(2015)4, pp. 221-231
    • Silva, M.B.; Isik, K.; Tekkaya, A.; Martins, P.A.F.: Fracture loci in sheet metal forming: A Review. In: Acta Metallurgica Sinica (English Letters), 28(2015)12, pp. 1415-1425
    • Lucas, H.; Denkena, B.; Grove, T.; Krebs, E.; Kersting, P.; Freiburg, D.; Biermann, D.: Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling. In: HTM Journal of Heat Treatment and Materials, 70(2015)4, pp. 183-189
    • Hildenbrand, P.; Schulte, R.; Merklein, M.: New process strategies to manufacture tailored blanks out of DP600 by orbital forming. In: Applied Mechanics and Materials, 794(2015), pp. 144-151
    • Breitsprecher, T.; Kestel, P.; Küstner, C.; Sprügel, T.; Wartzack, S.: Einsatz von Data-Mining in modernen Produktentstehungsprozessen. In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110(2015)11, München: Carl Hanser, pp. 744-750
    • Merklein, M.; Gröbel, D.; Löffler, M.; Schneider, T.; Hildenbrand, P.: Sheet-bulk metal forming – forming of functional components from sheet metals. In: Y. Qin, T.A. Dean, J. Lin, S.J. Yuan, F. Vollertsen (Edt.): Proceedings of the 4th International Conference on New Forming Technology, (2015), MATEC Web of Conferences, pp. 01001 1-12
    • Tillmann, W.; Stangier, D.; Biermann, D.; Kersting, P.; Krebs, E.; Hagen, L.: Tribological investigation of bionic and micro-structured functional surfaces. In: Materialwissenschaft und Werkstofftechnik, 46(2015)11, pp. 1096-1104
    • Gröne, M.; Krimm, R.; Behrens, B.: Vermeidung von Stößelversatz mit Elektromagneten. In: wt Werkstattstechnik online, (2015)10, pp. 687-691
    • Freiburg, D.; Hense, R.; Biermann, D.; Kersting, P.: Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques. In: J. Manuf. Sci. Eng., 138(2015)4, pp. 6
    • Salfeld, V.: Experimentelle und numerische Untersuchungen zur Verlagerung des Pressenstößels infolge einer Horizontalkraft. In: Bernd-Arno Behrens (Edt.): Berichte aus dem IFUM, Dissertation, 6(2015), Garbsen: PZH Verlag, published
    • Rademacher, A.: Adaptive space-time finite element methods for dynamic linear thermoelasticity. In: Proceedings in Applied Mathematics and Mechanics (PAMM) (Edt.): Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), 15(2015), Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 681-682
    • Matthias, S.; Kästner, M.; Reithmeier, E.; Sieczkarek, P.; Tekkaya, A.: Forming tool inspection using fiber-optic sensor heads. In: João Tavares, Natal Jorge (Edt.): Computational Vision and Medical Image Processing V, (2015), London, UK: Taylor & Francis Group, pp. 335-339
    • Gröbel, D.; Schneider, T.; Merklein, M.: Sheet-Bulk Metal Forming. In: Tekkaya, A.E.; Homberg, W.; Brosius, A. (Edt.): 60 Excellent Inventions in Metal Forming, (2015), Springer, pp. 101-106
    • Zeller, S.; Löhnert, S.; Wriggers, P.: Modelling thermoplastic material behaviour of dual-phase steels on a microscopic length scale. In: Proc. Appl. Math. Mech., 15(2015)1, pp. 373 - 374
    • Löhnert, S.: Stabilizing the XFEM for static and dynamic crack simulations. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): PAMM - Proc. Appl. Math. Mech., 15(2015)1, WILEY-VCH Verlag, pp. 137-138
    • Beese, S.; Löhnert, S.; Wriggers, P.: 3D Ductile crack propagation with the XFEM. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): PAMM - Proc. Appl. Math. Mech., 15(2015)1, WILEY-VCH Verlag, pp. 747-748
    • Matthias, S.; Schlobohm, J.; Kästner, M.; Reithmeier, E.: Gegenüberstellung zweier Messsysteme zur Geometrieerfassung mittels strukturierter Beleuchtung. In: VDI-Berichte, 2269(2015), pp. 81-88

    2014

    • Ashhab, M.S.; Breitsprecher, T.; Wartzack, S.: Neural network based modeling and optimization of deep drawing – extrusion combined process . In: Journal of Intelligent Manufacturing, 25(2014)1, Springer, pp. 77-84
    • Schneider, T.; Vierzigmann, U.; Merklein, M.: Analysis of Varying Properties of Semi-finished Products in Sheet-bulk Metal Forming of Functional Components. In: J. W. Yoon, T. B. Stoughton, B. Rolfe, J. H. Beynon, P. Hodgson (Edt.): NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, (2014), pp. 930-933
    • Landkammer, P.; Germain, S.; Steinmann, P.: On inverse form finding for orthotropic plasticity. In: Computer Assisted Methods in Engineering and Science, 20(2014)4, pp. 337-348
    • Schmid, C.; Hetzner, H.; Tremmel, S.; Hilpert, F.; Durst, K.: Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings. In: Advanced Materials Research, 996(2014), Dürnten (Schweiz): Trans Tech Publications Ltd, pp. 14-21
    • Landkammer, P.; Steinmann, P.: A fast approach to shape optimization by using the inverse FEM. In: Key Engineering Materials, 611(2014), pp. 1404-1412
    • Landkammer, P.; Germain, S.; Steinmann, P.: Optimum blank design by using the FEM based on inverse motion in orthotropic elasto-plasticity. In: P. Steinmann, G. Leugering (Edt.): Proc. Appl. Math. Mech., 14(2014), Wiley, pp. 353-354
    • Schmaltz, S.; Willner, K.: Comparison of Different Biaxial Tests for the Inverse Identification of Sheet Steel Material Parameters. In: Strain, 50(2014)5, pp. 389-403
    • Merklein, M.; Schneider, T.; Gröbel, D.; Nürnberger, F.: Blechmassivumformung – vom Halbzeug zum Funktionsbauteil. In: Behrens, B. A. (Edt.): 21. Umformtechnisches Kolloquium Hannover, Industrie und Wissenschaft – Gemeinsam die Zukunft gestalten, (2014), pp. 265-280
    • Breitsprecher, T.; Kestel, P.; Dingfelder, C.; Wartzack, S.: Gaussian process based approach for automatic knowledge acquisition. In: Marjanovic, D. (Edt.): DS 77: Proceedings of the DESIGN 2014 13th International Design Conference, (2014), Dubrovnik: Design Society, pp. 1733-1740
    • Gröne, M.; Krimm, R.; Salfeld, V.: Design of an Electromagnetic System to Avoid Horizontal Ram Displacement. In: Advanced Materials Research, 1018(2014), pp. 237-244
    • Germain, S.; Landkammer, P.; Steinmann, P.: A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems in isotropic elastoplasticity. In: P. Steinmann, G. Leugering (Edt.): Proc. Appl. Math. Mech., 14(2014), Wiley, pp. 423-424
    • Sieczkarek, P.; Isik, K.; Ben Khalifa, N.; Martins, P. A. F.; Tekkaya, A.: Mechanics of Sheet-Bulk Indentation. In: Journal of Materials Processing Technology (JMPT), 214(2014), Elsevier, pp. 2387-2394
    • Beyer, F.; Willner, K.: Surface Deformation due to Shear and Ploughing in a Halfspace. In: P. Steinmann & G. Leugering (Edt.): Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 14(2014)1, Weinheim: WILEY-VCH, pp. 239–240
    • Gröne, M.; Krimm, R.; Behrens, B.: Neuartiges System zur Vermeidung von Stößelversatz. In: wt Werkstattstechnik online, 104(2014)10, pp. 673-678
    • Isik, K.; Silva, M.B.; Tekkaya, A.; Martins P.A.F.: Formability limits by fracture in sheet metal forming. In: Journal of Materials Processing Technology, 214(2014), pp. 1557-1565
    • Breitsprecher, T.; Meinel, A.; Thummet, M.; Wartzack, S.: Produkt- und Prozessdatenmodellierung im Kontext der Blechmassivumformung. In: Stelzer, R. (Edt.): Entwerfen Entwickeln Erleben 2014 (EEE2014). Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik, (2014), Dresden: TUDpress Verlag der Wissenschaften, pp. 551-564
    • Breitsprecher, T.; Wartzack, S.: Der Einsatz von Gaußprozessen zur Beschleunigung der automatischen Wissensakquisition. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X - Beiträge zum 25. DFX-Symposium 2014, (2014), Hamburg: TuTech Verlag, pp. 227-236
    • Breitsprecher, T.; Dingfelder, C.; Wartzack, S.: Ein Ansatz zur adaptiven Simulationsdatenerhebung. In: Brökel, K.; Feldhusen, J.; Grote, K.-H.; Rieg, F.; Stelzer, R. (Edt.): 12. Gemeinsames Kolloquium Konstruktionstechnik, (2014), Bayreuth, pp. 461-470
    • Behrens, B.; Hübner, S.; Bouguecha, A.; Gribic, N; Vucetic, M.: Comparison of determination of biaxial true stress – true strain curves by the use of plane strain compression test and bulge test. In: AIP Publishing, 1567(2014)1, AIP Conference Proceedings , pp. 650-653
    • Schmaltz, S.; Willner, K.: Identification of material behavior via a Finite Element Model Updating strategy. In: P. Steinmann, G. Leugering (Edt.): Proc. Appl. Math. Mech., 14(2014)1, Wiley, pp. 439-440
    • Krebs, E.; Kersting, P.: Improving the cutting conditions in the five-axis micromilling of hardened high-speed steel by applying a suitable tool inclination. In: Procedia CIRP, 14(2014), pp. 366-370
    • Faßmann, D.: Beitrag zur wechselseitigen Beeinflussung von Mikrostruktur und Blechmassivumformprozess. Dissertation, Berichte aus dem IW, 1(2014), Hannover: PZH-Verlag, published
    • Biermann, D.; Kersting, P.; Odendahl, S.; Joliet, R.; Zabel, A.: Simulation der NC-Fräsbearbeitung – Multiskaliger Ansatz für eine effiziente und flexible Simulation147(2014)6, WB – Werkstatt und Betrieb, pp. 78-81
    • Lehmann, E.: Dr.-Jürgen-Ulderup-Preis. In: Dr.-Jürgen-Ulderup-Stiftung (Edt.): Preis für herrausragende Leistungen in der Promotion, (2014), Hannover: Dr.-Jürgen-Ulderup-Stiftung, published
    • Denkena, B.; Grove, T.; Lucas, H.: Interaction of Load and Residual Stresses in Sintered 1.3344 High Speed Steel. In: Advanced Materials Research, 1018(2014), pp. 145-152
    • Matthias, S.; Kästner, M.; Reithmeier, E.: Camera and projector calibration of an endoscopic fringe projection system. In: Proceedings of 11th IMEKO Symposium LMPMI2014 (Laser Metrology for Precision Measurement and Inspection in Industry) ISBN 978-92-990075, (2014), published
    • Merklein, M.; Andreas, K.; Gröbel, D.; Hildenbrand, P.; Müller, M.; Noneder, J.; Reiß, A.; Schneider, T.; Vierzigmann, U.: Potenziale und Grenzen der Simulation in der Fertigungstechnik. In: Simufact Engineering (Edt.): Tagungsband 15. RoundTable - Simulating Manufacturing, (2014), Marburg: ISBN: 978-3-9813814-3-6, published
    • Gröbel, D.; Koch, J.; Vierzigmann, U.; Engel, U.; Merklein, M.: Investigations and approaches on material flow of non-uniform arranged cavities in sheet bulk metal forming processes. In: Procedia Engineering, 81(2014), pp. 401-406
    • Zhao, R.; Weikert, T.; Tremmel, S.; Wartzack, S.: Untersuchung des tribologischen Verhaltens wolframmodifizierter amorpher Kohlenstoffschichten (a-C:H:W) bei systematischer Variation der Biasspannung und des Argonflusses während des Beschichtungsprozesses. In: Gesellschaft für Tribologie e.V. (Edt.): 55. Tribologie-Fachtagung. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Band 2, (2014), Göttingen, pp. 32/1-32/10
    • Hetzner, H.; Schmid, C.; Tremmel, S.; Durst, K.; Wartzack, S.: Empirical-Statistical Study on the Relationship between Deposition Parameters, Process Variables, Deposition Rate and Mechanical Properties of a-C:H:W Coatings. In: MDPI (Edt.): Coatings - Special Issue "Recent Aspects of Thin Films Deposited by Magnetron Sputtering and Emerging Applications", 4(2014), pp. 772-795
    • Kersting, P.; Krebs, E.; Baumann, J.; Joliet, R.; Odendahl, S.; Rausch, S.; Schweinoch, M.; Siebrecht, T.: Potentiale geometrisch-physikalischer Prozesssimulationen zur Modellierung und Optimierung spanender Fertigungsverfahren. In: Begleitband zum Fertigungstechnischen Kolloquium Magdeburg – Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz, (2014), pp. 4: 1 - 12
    • Hildenbrand, P.; Schneider, T.; Merklein, M.: Application of Process adapted semi-finished Parts for the Production of Thin-walled Components via Sheet-Bulk Forming.. In: Kawalla, R. (Edt.): AutoMetForm / SFU 2014, (2014), Freiberg: ACATRAIN e.V., pp. 58-66
    • Loderer, A.; Hausotte, T.; Steinmann, P.; Merklein, M.; Landkammer, P.; Schneider, T.; Hildenbrand, P.: Development of a feature adapted measurement evaluation strategy. In: PTB open access repository (Edt.): MacroScale 2014 - Recent developments in traceable dimensional measurements, 10.7795/810.20150325P, (2014), Wien, pp. 1-13
    • Reithmeier, E.; Kästner, M.; Matthias, S.; Schlobohm, J. : Endoskopische 3D-Messtechnik. In: Deutsche Gesellschaft für angewandte Optik (Edt.): DGaO-Proceedings, (2014), published

    2013

    • Sieczkarek, P.; Kwiatkowski, L.; Ben Khalifa, N.; Tekkaya, A.: Novel five-axis forming press for the incremental sheet-bulk metal forming. In: Key Engineering Materials, 554(2013), pp. 1478-1483
    • Salfeld, V.; , .; Krimm, R.; Behrens, B.; Sieczkarek, P.; Ben Khalifa, N.; Tekkaya, A.; Hetzner, H.; Tremmel, S.; Wartzack, S.: Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen. In: Merklein,M., Behrens, B.-A., Tekkaya, A. E. (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, 2(2013), Meisenberg Bambach, published
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: A device for endoscopic measurements of forming tools with filigree side elements. In: Optical Measurement Techniques for Systems & Structures² ISBN 978-90-423-0419-2, (2013), Maasricht: Shaker Publishing, pp. 273-280
    • Schneider, T.; Merklein, M.: Manufacturing of geared sheet metal components by a single-stage Sheet-bulk metal forming process. In: D. Dimitrov; C. Schutte (Edt.): Proc. Conf. Competitive Manufacturing, (2013), Stellenbosch, South Africa: ISBN Nr: 978-0-7972-1405-7, pp. 177-182
    • Salfeld, V.; Krimm, R.; Hübner, S.; Vucetic, M.: Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts. In: Advanced Materials Research, 769(2013), Switzerland: Trans Tech Publication, pp. 229-236
    • Häfner, T.; Reg, Y.; Hetzner, H.; Schmidt, M.: Microstructuring tools for sheet metal bulk forming – a designated application for picosecond laser. In: Journal of Laser Micro Nanoengineering, 8(2013)1, pp. 39-44
    • Hauer, F.; Willner, K.: Development of a friction law respecting plastic surface smoothing. In: Key Engineering Materials (Edt.): 554(2013), Durnten - Zurich: Trans Tech Publications Ltd, pp. 1471-1477
    • Hetzner, H.; Zhao, R.; Tremmel, S.; Wartzack, S.: Tribological adjustment of tungsten-modified hydrogenated amorphous carbon coatings by adaption of the deposition parameters. In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B. Merklein, M. (Edt.): 10th International Conference THE "A" Coatings, 10.-11. April 2013, (2013), Aachen: Shaker, pp. 39-49
    • Wartzack, S.; Hetzner, H.; Tremmel, S.: Amorphe Kohlenstoffschichten für die Blechmassivumformung. In: Konstruktion, 3(2013), pp. 65-66
    • Opel, S.; Schneider, T.; Merklein, M.: Manufacturing of geared sheet metal components using flexible rolled tailored blanks. In: Key Engineering Materials, 554(2013), pp. 1459-1470
    • Biermann, D.; Tillmann, W.; Herper, J.: New coating systems for temperature monitoring in turning processes. In: Surface & Coatings Technology, 215(2013), pp. 376-380
    • Koch, J.; Merklein, M.: Cold forging of closely-tolerated functional components out of blanks – possibilities of the new process class sheet-bulk metal forming. In: Japan Society for Technology of Plasticity (Edt.): Proc. of the 6th JSTP International Seminar on Precision Forging, (2013), pp. 109-112
    • Lehmann, E.; Faßmann, D.; Löhnert, S.; Schaper, M.; Wriggers, P.: Texture development and formability prediction for pre-textured cold rolled body-centred cubic steel. In: International Journal of Engineering Science, 68(2013), pp. 24-37
    • Isik, K.; Soyarslan, C.; Tekkaya, A.: Continuum Damage Mechanics (CDM) Based Local Approach to the Sheet-Bulk Metal Formability Prediction. In: Advanced Materials Research, 769(2013), pp. 205-212
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Kersting, P.; Tillmann, W.; Herper, J.: Innovative tools to improve incremental bulk forming processes. In: Key Engineering Materials , 554(2013), pp. 1490-1497
    • Sieczkarek, P.; Kwiatkowski, L.; Ben Khalifa, N.; Tekkaya, A.: Novel five-axis forming press for the incremental sheet-bulk metal forming. In: Key Engineering Materials, 554(2013), pp. 1478-1483
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: High resolution measurements of filigree, inner geometries with endoscopic micro fringe projection. In: Proceedings of SPIE, Optical Measurement Systems for Industrial Inspection VIII, 8788(2013)1, SPIE, pp. 878817-1
    • Ohrt, C.; Matthias, S.; Kästner, M.; Reithmeier, E.: A DEVICE FOR ENDOSCOPIC MEASUREMENTS OF FORMING TOOLS WITH FILIGREE SIDE ELEMENTS. In: Buytaert J. (Edt.): Recent Advances in Topography Research ISBN: 978-1-62618-840-2, (2013), Nova Science Publishers, pp. 255 - 276
    • Hense, R.: Using Chatter Vibrations in Milling to Create Tribo-Functional Surfaces for Sheet-Bulk Metal Forming Tools. In: Advanced Materials Research, 769(2013), pp. 263-270
    • Breitsprecher, T.; Wartzack, S.: A classification system for secondary design features for the use within sheet-bulk metal forming. In: Lindemann, U.; Srinivasan, V.; Kim, Y.S.; et al. (Edt.): DS 75-5: Proceedings of the 19th International Conference on Engineering Design (ICED13), (2013), Seoul: Design Society, pp. 039–048
    • Merklein, M.; Hagenah, H.; Schneider, T.: Sheet-Bulk Metal Forming Processes - State of the Art and its Perspectives. In: R. Kolleck (Edt.): TTP 2013 - Tools and Technologies for Processing Ultra High Strength Materials, (2013), Graz, Österreich: Verlag der TU Graz, pp. 197-204
    • Plettke, R.; Opel, S.: Investigations on orbital forming of sheet metals to manufacture tailored blanks with a defined sheet thickness variation. In: Advanced Materials Research, 769(2013), pp. 157-164
    • Ohrt, C.; Andreas Pösch; Kästner, M.; Reithmeier, E.: One Image Fibrescopic Finge Projection with Inverse Approach. In: 11th International Symposium on Measurement and Quality Control, (2013), Cracow-Kielce, Poland, published on CD
    • Ohrt, C.; Andreas Pösch; Kästner, M.; Reithmeier, E.: Potentials of Endoscopic Fringe Projection - A Differentiation of Measuring Video-, Fiber- and Borescopy. In: W.Osten (Edt.): Fringe 2013, 7th International Workshop on Advanced Optical Imaging and Metrology, (2013), Berlin Heidelberg 2014: Springer-Verlag, pp. 735 - 740
    • Weckenmann, A.; Hartmann, W.: Function-oriented Measurements - the Path from Macro to Micro and Nano Range. In: Aguilar Martin, J.; Yagäe Fabra, J.; Lope Domingo, M.; Santolaria Mazo, J.; Albajez Garcia, J. (Edt.): Proceedings of the 5th Manufacturing Engineering Society International Conference (5th Manufacturing Engineering Society International Conference - MESIC 2013, (2013), Zaragoza, Spain, published
    • Hartmann, W.; Weckenmann, A.: Function-Oriented Dimensional Metrology - More than Determining Size and Shape. In: AMA Service GmbH (Edt.): Proceedings of AMA Conferences 2013 with SENSOR, OPTO, IRS² (Sensor 2013 - 16th International Conference on Sensors and Measurement Technology, Nürnberg, 14.–16.05.2013), (2013), pp. 285-290
    • Germain, S.; Landkammer, P.; Steinmann, P.: On a recursive formulation for solving inverse form finding problems in isotropic elastoplasticity. In: Advanced Modelling and Simulation in Engineering Sciences, 1(2013)10, pp. 1-19
    • Schmaltz, S.; Willner, K.: Implementierung und Anpassung eines Materialmodells für FE-Simulationen in der Blechmassivumformung. In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben (Edt.): XXXII. Verformungskundliches Kolloquium, 32(2013)1, Leoben, Österreich, pp. 95-100
    • Hartmann, W.; Loderer, A.: Measurement procedures and evaluations methods for the extraction and assessment of functional features of microstructured surfaces. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 61
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying measuring systems by using Six Sigma. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 93
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Measurement strategy for a production-related multi-scale inspection of formed work pieces.. In: Seliger, G. (Edt.): Proceedings of the 11th Global Conference on Sustainable Manufacturing - Innovative Solutions, (2013), Berlin: Universitätsverlag der TU Berlin, pp. 148-153
    • Schmaltz, S.; Willner, K.: Sheet steel material parameter identification utilizing a biaxial tensile test and optical full-field measurements. In: A. Chrysochoos, H. Louche B. Wattrisse (Edt.): PhotoMechanics 2013, International Conference on Full-Field Measurement Techniques and their Applications in Experimental Solid Mechanics, (2013), Montpellier, France, pp. 89–92
    • Schmaltz, S.; Willner, K.: Material modelling and parameter identification for sheet-bulk metal forming. In: Onate, E.; Owen, D.R.J.; Peric, D.; Suarez, B. (Edt.): Proceedings of the XII International Conference on Computational plasticity - Fundamentals and Applications, 12(2013)1, Barcelona, Spain, pp. 39-50
    • Schmaltz, S.; Willner, K.: Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation. In: Journal of JSEM, 13(2013)1, pp. 120-125
    • Merklein, M.; Hagenah, H.; Schneider, T.: Blechmassivumformung – Stand der Technik und Ausblick. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 1-10
    • Kersting, P.; Odendahl, S.: Higher Efficiency Modeling of Surface Location Errors by Using a Multi-scale Milling Simulation 9(2013), Procedia CIRP, pp. 18-22
    • Vierzigmann, U.; Schneider, T.; Koch, J.; Merklein, M.; Engel, U.; Hense, R.; Biermann, D.; Krebs, E.; Kersting, P.; Lucas, H.; Denkena, B.; Herper, J.; Tillmann, W.; Stangier, D.: Untersuchungen von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 137-162
    • Salfeld, V.; Krimm, R.; Behrens, B.; Sieczkarek, P.; Ben Khalifa, N.; Tekkaya, A.; Tremmel, S.; Wartzack, S.: Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen. In: Merklein, M., Behrens, B.-A., Tekkaya, A. E. (Edt.): Tagungsband zum 2. Workshop Blechmassivumformung 2013 - DFG Transregio 73, (2013), Bamberg: Meisenbach , pp. 13-36
    • Faßmann, D.; Isik, K.; Zeller, S.; Beese, S.; Ben Khalifa, N.; Nürnberger, F.; Schaper, M.; Tekkaya, A.; Löhnert, S.; Wriggers, P.: Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen Belastungspfaden. In: M. Merklein, B.-A. Behrens, A.E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), pp. 69-84
    • Tillmann, W.; Herper, J.; Laemmerhirt, I.-A.: Tribological comparison of different surface topographies coated with chromium aluminium nitride. In: Materialwissenschaft und Werkstofftechnik, 44(2013)8, pp. 730-735
    • Schmaltz, S.; Landkammer, P.; Beyer, F.; Kumor, D.; Rademacher, A.; Blum, H.; Steinmann, P.; Willner, K.: Vorstellung eines Simulationsbenchmarks für die Blechmassivumformung. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 53-68
    • Herper, J.: Tribologische Untersuchungen von verschleiß- und reibungsarmen nanostrukturierten bionischen PVD-Beschichtungen. In: Wolfgang Tillmann (Edt.): Werkstofftechnologische Schriftenreihe, 8(2013), Dissertation: Vulkan Verlag, published
    • Biermann, D.; Krebs, E.; Steiner M.: Investigation of Different Hard Coatings for Micromilling of Austenitic Stainless Steel. In: Procedia CIRP, 7(2013), pp. 246-251
    • Breitsprecher, T.; Hense, R.; Beyer, F.; Biermann, D.; Wartzack, S.; Willner, K.: Sensitivitätsanalyse der tribologischen Eigenschaften gefräster Oberflächenstrukturen bei der Blechmassivumformung. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 121-136
    • Hokhman, O. R.; Volchok, N. A.; Faßmann, D.: Distribution of Microdefects in Sheets of St1.03-12 Low-Carbon Steel in Tension at Different Rates. In: Materials Science , 49(2013)2, pp. 199-205
    • Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.: Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), Bamberg: Meisenbach, pp. 101-118
    • Germain, S.: On inverse form finding for anisotropic materials in the logarithmic strain space. In: P. Steinmann, K. Willner (Edt.): Dissertation, Schriftenreihe Technische Mechanik, 8(2013), Erlangen: FAU Erlangen-Nürnberg, pp. 1-144
    • Behrens, B.; Hübner, S.; Vucetic, M.: Verfahren zur Herstellung eines Bauteils und kombiniertes Umformwerkzeug dafür. In: Patent: WO 2013017659 A1, (2013), published
    • Weckenmann, A.; Hartmann, W.: Function-oriented Measurements – the Path from Macro to Micro and Nano Range. In: Procedia Engineering, 63(2013), Amsterdam: Elsevier, pp. 861 - 872
    • Behrens, B.; Hübner, S.; Vucetic, M.: Influence of Superimposing of Oscillation on Sheet-Bulk Metal Forming. In: Key Engineering Materials, 554(2013), Trans Tech Publications, Switzerland, pp. 1484-1489
    • Lehmann, E.: Computational homogenisation of polycrystalline elastoplastic microstructures at finite deformation. In: Prof. Dr.-Ing. habil. Dr. h.c. mult. Peter Wriggers (Edt.): Dissertation, (2013)2, Hannover: Institut für Kontinuumsmechanik, published
    • Krebs, E.: Mikrofräsen von funktionalen Oberflächenstrukturen in hochharten Arbeitsstählen. In: Biermann, D. (Hrsg.) (Edt.): Begleitband zum Fachgespräch zwischen Industrie und Hochschule „Zerspanen im modernen Produktionsprozess“, (2013), pp. 189-199
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Kersting, P.; Tillmann, W.; Herper, J.: Innovative tools to improve incremental bulk forming processes. In: Key Engineering Materials, 554(2013), pp. 1490-1497
    • Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.: Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück. In: Merklein, M., Behrens, B.-A., Tekkaya, A. E. (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, 2(2013), Meisenberg Bambach, published
    • Germain, S.: On Inverse Form Finding for Anisotropic Materials in the Logarithmic Strain Space. In: P. Steinmann, K. Willner (Edt.): Dissertation, Schriftenreihe Technische Mechanik, 8(2013), Erlangen: FAU Erlangen-Nürnberg, pp. 1-144

    2012

    • Schmaltz, S.; Willner, K.: Material Parameter Optimization utilizing full-field strain measurement data and the Finite Element Method. In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben (Edt.): XXXI. Verformungskundliches Kolloquium, 31(2012)1, Leoben, Österreich, pp. 13-18
    • Behrens, B.; Krimm, R.; Salfeld, V.: Process-machine interaction in Sheet-bulk metal forming. In: Key Engineering Materials (Edt.): (2012), pp. 999-1004
    • Weckenmann, A.; Akkasoglu, G.: Maturity determination and information visualization of new forming processes considering uncertain indicator values. In: AIP Conference Proceedings, 1431(2012), pp. 899-911
    • Weckenmann, A.; Akkasoglu, G.: Maturity determination of new forming processes considering uncertain indicator values. In: Key Engineering Materials, 502(2012), Schweiz: Trans Tech Publications, pp. 97-102
    • Weckenmann, A.; Werner, T.; Akkasoglu, G.: From Filtering Waste to Enabling Innovation - Facing the Challenges of Engineering in Quality Management . In: Quality - Access to Success, 13(2012)126, pp. 72-78
    • Lehmann, E.; Schmaltz, S.; Germain, S.; Faßmann, D.; Weber, C.; Löhnert, S.; Schaper, M.; Steinmann, P.; Willner, K.; Wriggers, P.: Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.993, pp. 993-998
    • Weckenmann, A.; Akkasoglu, G.: Maturity Model for the development of new forming processes applied to the Sheet-Bulk Metal Forming. In: Key Engineering Materials, 504(2012), Schweiz: Trans Tech Publications, pp. 1011-1016
    • Germain, S.; Steinmann, P.: Towards inverse form finding methods for a deep drawing steel DC04. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.619, pp. 619-624
    • Weckenmann, A.; Akkasoglu, G.: Methodic design of a customized Maturity Model for Geometrical Tolerancing. In: Procedia CIRP, (2012), Netherlands/UK: Elsevier, in print
    • Merklein, M.; Plettke, R.; Schneider, T.; Opel, S.: Manufacturing of sheet metal components with variants using process adapted semi-finished products. In: Key Engineering Materials, 504(2012), Schweiz: Trans Tech Publications, pp. 1023-1028
    • Weckenmann, A.; Reithmeier, E.; Merklein, M.; Wartzack, S.; Behrens, B.; Akkasoglu, G.; Ohrt, C.; Schneider, T.; Salfeld, V.; Breitsprecher, T.; Plugge, B.: Methodengestützte Referenzvorgehensweise für neue Umformverfahren. In: Zeitschrift für wirtschaftlichen Fabrikbetrieb ZWF, 107(2012)1, München: Hanser, pp. 43-47
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: The Load-Scanning Test – Evaluation of a Universal Tribological Model Test in View of Sheet Bulk Metal Forming. In: Key Engineering Materials, 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.981, pp. 981-986
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Amorphous Carbon Coatings for Locally Adjusted Tribological Properties in Sheet Bulk Metal Forming. In: Key Engineering Materials, 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.969, pp. 969-974
    • Merklein, M.; Opel, S.; Schneider, T.; Koch, J.: Überblick der Blechmassivumformung. In: Umformtechnik, 1(2012)3, Bamberg: Meisenbach, pp. 42-43
    • Merklein, M.; Plettke, R.; Opel, S.: Orbital forming of tailored blanks from sheet metal. In: Annals of the CIRP, 1(2012)61, Amsterdam: Elsevier, pp. 263-266
    • Faßmann, D.; Schaper, M.; Bach, F.: Investigation of Ductile Damage Development in Ferritic Steel Subject to Uniaxial Deformation. In: Fatigue and Fracture of Engineering Materials and Structures , (2012), published
    • Investigation of Ductile Damage Development in Ferritic Steel Subject to Uniaxial Deformation. In: Fatigue & Fracture of Engineering Materials & Structures, (2012), in print
    • Akkasoglu, G.; Weckenmann, A.: Systematic design of a Maturity Model for the Development of New Forming Processes. In: Journal of Management and Finance 10 (2012) 3, pp. 191-202. - ISSN 2084-5189., (2012), published
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests. In: Surface and Coatings Technology, 206(2012)23, doi:10.1016/j.surfcoat.2012.05.077, pp. 4864-4871
    • Lizunkova, Y.; Hassel, T.; Bach, F.: Temperature control during the APN-process on the steel 1.3343. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.1017, pp. 1017-1022
    • Reithmeier, E.; Ohrt, C.; Kästner, M.: Fast Endoscopic Geometry Measurement of Sheet-Bulk Metal Formed Part. In: CIRP January Meeting 2012 (Edt.): (2012), published
    • Ohrt, C.; Hartmann, W.; Kästner, M.; Weckenmann, A.; Hausotte, T.; Reithmeier, E.: Holistic measurement in the sheet-bulk metal forming process with fringe projection. In: scientific net (Edt.): Key Engineering Materials, 504(2012), Zurich-Durnten,Switzerland: Trans Tech Publications, pp. 1005-1010
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Fast Endoscopic Geometry Measurement with Fibre Based Fringe Projection for Inner Geometries. In: CMSC 2012 (Edt.): (2012), published
    • Breitsprecher, T.; Hense, R.; Hauer, F.; Wartzack, S.; Biermann, D.; Willner, K.: Acquisition of heuristic knowledge for the prediction of the frictional behavior of surface structures created by self-excited tool vibrations. In: Key Engineering Materials, 504(2012), Trans Tech Publications, pp. 963-968
    • Behrens, B.; Krimm, R.; Salfeld, V.: Analysis of Machine Influence on Process Stability in Sheet-Bulk Metal Forming. In: 45th CIRP CMS (Edt.): (2012), pp. 36-40
    • Lehmann, E.; Löhnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation. In: Technische Mechanik, 32(2012)2, pp. 369-379
    • Schmaltz, S.; Willner, K.: Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation. In: Proc. of ISEM-ACEM-SEM-7th ISEM’12-Taipei Conference, (2012), Taipei, Taiwan (R.O.C.), published
    • Surmann, T.; Krebs, E.: Optimization of Micromilling by Adjustment of Inclination Angles. In: 1st CIRP Global Web Conference, (2012), accepted
    • Kersting, P.; Krebs, E.; Biermann, D.: Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel. In: Engineering (Edt.): (2012), accepted
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Biermann, D.; Tillmann, W.; Herper, J.: Improved Tool Surfaces for Incremental Bulk Forming Processes of Sheet Metals. In: Key Engineering Materials (Edt.): 504(2012), pp. 975-980
    • Tillmann, W.; Herper, J.: Development and Tribological Investigation of the Coating System Chromium Carbonitride (CrCN) to Different Surface Designs. In: Journal of Materials Science and Engineering (Edt.): (2012)4, pp. 223-229
    • Vierzigmann, U.; Koch, J.; Merklein, M.; Engel, U.: Material Flow in Sheet-Bulk Metal Forming. In: Key Engineering Materials, 504(2012), Durnten-Zurich: Trans Tech Publications, pp. 1035-1040
    • Krebs, E.; Kersting, P.; Biermann, D.: Using NC-path deformation for compensating tool deflections in micromilling of hardened steel. In: Procedia CIRP (Edt.): 1(2012), pp. 132-137
    • Faßmann, D.; Nürnberger, F.; Schaper, M.; Bach, F.: Präparationsroutine zur in-situ Dehnuntersuchung des Tiefziehstahls DC04 mittels Transmissionselektronenmikroskopie. In: Praktische Metallographie, 49(2012)9, pp. 577-587
    • Häfner, T.; Reg, Y.; Hetzner, H.; Schmidt, M.: Microstructuring tools for sheet bulk metal forming - a designated application for picosecond laser. In: Proc. 13th International Symposium on Laser Precision Microfabrication, 12.-15. Juni 2012, (2012), Washington, USA, pp. 1-6
    • Biermann, D.; Surmann, T.; Hense, R.: Korrektur von gemessenen Zerspankräften beim Fräsen. In: wt-online, (2012), pp. 789–794
    • Merklein, M.; Behrens, B.; Brosius, A.; Hagenah, H.; Tekkaya, A.; Weckenmann, A.: Bulk forming of sheet metal. In: Annals of the CIRP, 61(2012)2, Amsterdam: Elsevier, pp. 725-745
    • Hauer, F.; Willner, K.: Halfspace Simulation of Rough Surface Contact in Metal Forming. In: Proc. 10th World Congress on Computational Mechanics, ISBN 978-85-86686-70-2, (2012), published on CD
    • Lizunkova, Y.; Hassel, T.; Bach, F.: Structure of surface zone of the steel 1.3343 after atmospheric plasma-nitriding. In: Bogorodskiy petschatnik (Edt.): (2012), XXIV Russia Conference on electron microscopy (RCEM-2012), pp. 132-133
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests. In: Surface and Coatings Technology, 212(2012), doi:10.1016/j.surfcoat.2012.09.012, pp. 46-54
    • Ziegler, P.; Breitsprecher, T.; Wartzack, S.: Application of sensitivities on simulation-data-based metamodels during the product synthesis. In: Marjanovic, D. (Edt.): Proceedings of 12th International Design Conference, (2012), Dubrovnik, pp. 589-598
    • Blum, H.; Rademacher, A.; Stiemer, M.: Goal oriented error control for frictional contact problems in metal forming. In: Key Engineering Materials, 504(2012), pp. 987-992
    • Breitsprecher, T.; Wartzack, S.: Architecture and realization of a self-leraning engineering assistance system for the use within sheet-bulk metal forming. In: Hansen, P.; Rasmussen, J. (Edt.): Proceedings of 9th Norddesign Conference, (2012), Aalborg (Dänemark), published
    • Rademacher, A.; Schröder, A.: Dual weighted residual error control for frictional contact problems. In: Humboldt Universität zu Berlin, Institut für Mathematik, Preprint, 12(2012)7, published
    • Ziegler, P.; Wartzack, S.: Visualization of simulation-data-based metamodels during the product synthesis. In: Rasmussen, J. (Edt.): Proceedings of 9th Norddesign Conference, (2012), Aalborg (Dänemark), pp. 638-645
    • Bach, F.: Synthesis of Tribologically Favorable Coatings for Hot Extrusion Tools by Suspension Plasma Spraying. In: Thermal Spray Technology (Edt.): 21(2012)3, pp. 668-675
    • Behrens, B.; Hübner, S.; Vucetic, M.: Shortening the process chain by sheet-bulk metal forming processes. In: 10th Global Conference on Sustainable Manufacturing (Edt.): (2012), published
    • Akkasoglu, G.; Weckenmann, A.: Design of a maturity model for new forming processes considering uncertain values. In: 2nd International Conference on Quality and Innovation in Engineering and Management (22.-24.11.2012, Cluj-Napoca, Rumänien), (2012), submitted
    • Weckenmann, A.; Akkasoglu, G.; Werner, T.: Paradigm shifts in quality management. In: 2nd International Conference on Quality and Innovation in Engineering and Management (22.-24.11.2012, Cluj-Napoca, Rumänien), (2012), submitted
    • Akkasoglu, G.; Weckenmann, A.: Design of a maturity model for new forming processes considering uncertain values. In: 2nd International Conference on Quality and Innovation in Engineering and Management (Edt.): (2012), accepted
    • Weckenmann, A.; Akkasoglu, G.; Werner, T.: Paradigm shifts in quality management. In: 2nd International Conference on Quality and Innovation in Engineering and Management (Edt.): (2012), accepted
    • Akkasoglu, G.; Weckenmann, A.: Systematically designed Maturity Model for Sustainable Development of New Forming Processes. In: 10th Global Conference on Sustainable Manufacturing (Edt.): (2012), accepted
    • Nürnberger, F.; Faßmann, D.; Schaper, M.: Numerical investigation of in situ TEM tensile tests. In: Metallurgical and Mining Industry , 4(2012)4, pp. 37-44
    • Germain, S.; Steinmann, P.: On a recursive algorithm for avoiding mesh distortion in inverse form finding6(2012)1, Journal of the Serbian Society for Computational Mechanics, pp. 216-234
    • Germain, S.; Steinmann, P.: On two different inverse form finding methods for hyperelastic and elastoplastic materials12(2012), Proc. Appl. Math. Mech., pp. 263-264
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Erfindung zur signifikanten Erhöhung der Tiefenschärfe bei endoskopischen Messungen
    • Akkasoglu, G.; Weckenmann, A.: Systematically designed Maturity Model for Sustainable Development of New Forming Processes. In: 10th Global Conference on Sustainable Manufacturing- CIRP supported (31.10.-02.11.2012, Istanbul, Türkei), (2012), accepted
    • Wartzack, S.; Hetzner, H.; Tremmel, S.: Amorphe Kohlenstoffschichten für die Blechmassivumformung. In: ZWF, 107(2012)11, pp. 793-794
    • Behrens, B.; Voges-Schwieger, K.; Bouguecha, A.; Mielke, J; Vucetic, M.: Material Characterization for Sheet-Bulk Metal Forming. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.1029, pp. 1029-1034
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.: Blechumformen läuft jetzt ab Losgröße 1. In: VDI (Edt.): VDI Nachrichten, 33(2012), pp. 17
    • Hetzner, H.; Schaufler, J.; Pejic, G.; Tremmel, S.; Durst, K.; Wartzack, S.: Untersuchung des tribologisch-mechanischen Verhaltens amorpher Kohlenstoffschichten mittels Load Scanner. In: Materialwissenschaft und Werkstofftechnik, 43(2012), John Wiley & Sons, Ltd, pp. 226-233

    2011

    • Soyarslan, C.; Brosius, A.; Tekkaya, A.: Failure Analysis in Bending of a Class of High Strength Steel Sheets Using Porous Plasticity(2011), Tools and Forming 2011, published
    • Merklein, M.; Schneider, T.: Functional Integration of Sheet Metal Parts by Deep Drawing(2011), Steel Research International - Special Edition ICTP 2011, pp. 1036-1041
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: 3D Messtechnik für Inspektion und In-Situ Überwachung(2011), Ingenieurspeigel Ausgabe 3 2011, pp. S.71-72
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Anpassung von Strahlformungstechnolgien in Mikrostreifenprojectionssysteme(2011), Laser Metrology for Precision Measurement and Inspection in Industry 2011 VDI-Berichte 2156, pp. 177-184
    • Lehmann, E.; Schmaltz, S.; Faßmann, D.; Germain, S.; Weber, C.; Löhnert, S.; Schaper, M.; Bach, F.; Steinmann, P.; Willner, K.; Wriggers, P.: Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten(2011), In: M. Merklein, Fr.-W. Bach, A.E. Tekkaya (Hrsg.): Tagungsband zum 1. Workshop Blechmassivumformung 2011, pp. 13-32
    • Soyarslan, C.; Brosius, A.; Tekkaya, A.: Characterization of initial anisotropy of sheet metals employing inhomogeneous strain fields(2011), Numisheet 2011, published
    • Vierzigmann, U.; Merklein, M.; Engel, U.: Tribological Conditions in Sheet-Bulk Metal Forming(2011), published
    • Faßmann, D.; Schaper, M.; Bach, F.: Präparations- und Analysestrategie zur Untersuchung verformungsinduzierter Poren in kaltverformtem Stahl(2011), Practical Metallography Band 48, 5/2011, pp. 232-238
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Endoskopische Streifenprojekiton mit erhöhter Tiefenschärfe(2011), SPIE Optical Metrology 2011 Proceedings, pp. 808215-1
    • Schmaltz, S.; Willner, K.: Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU(2011), published on CD
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Endoskopische Laserstreifenprojektion(2011), Kaiser Friedrich Forschungspreis 2011 InnovationsForum Optische Sensorik, pp. S.85-86
    • Schneider, T.; Merklein, M.: Sheet-Bulk Metal Forming of Preformed Sheet Metal Parts(2011), Schweiz, pp. 83-90
    • Behrens, B.; Krimm, R.; Bouguecha, A.; Salfeld, V.: Characterization of Horizontal Loads in the Production of Asymmetrical Parts(2011), published
    • Behrens, B.; Hübner, S.; Krimm, R.; Vucetic, M.; Cahyono, T.: Entwicklung eines hydraulischen Aktuators zur Schwingungsüberlagerung in der Umformmaschine(2011), published
    • Schmaltz, S.; Willner, K.: Identification of the yield surface for sheet steel using an optical measurement system(2011), 10th Youth Symposium on Experimental Solid Mechanics, Chemnitz, Germany, published
    • Weickmann, J.: Assistenzsystem für die Prüfung von Blechbauteilen mit Mehrkomponenten-Streifenprojektionssystemen unter Anwendung der „virtuellen Rückdeformation“(2011), published
    • Krebs, E.; Biermann, D.: Micromilling of Bionic Structures(2011), published
    • Weickmann, J.: Simulation-based determination of local optical probing uncertainty for fringe projection measurements(2011), San Francisco, pp. 7864C1-C12
    • Krebs, E.; Baschin, A.; Biermann, D.: Manufacturing of dies from hardened tool steels by 3-axis micromilling(2011), published
    • Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards the effective behaviour of polycrystalline materials for sheet bulk metal forming processes(2011), AIP Conf. Proc., 1353, pp. 1179-1184
    • Merklein, M.; Behrens, B.; Plettke, R.; Krimm, R.; Opel, S.; Schneider, T.; Salfeld, V.: Integrierte Fertigung von tiefgezogenen Blechbauteilen mit Verzahnungselementen unter Einsatz von prozessangepassten Halbzeugen. In: M. Merklein (Edt.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011, (2011), Bamberg: Meisenbach, pp. 159-180
    • Germain, S.; Steinmann, P.: On Inverse Form Finding for Anisotropic Elastoplastic Materials. In: Gary Menary, School of Mechanical and Aerospace Engineering (Edt.): 1353(2011), doi>10.1063/1.3589674: AIP Conference Proceedings, pp. 1169-1174
    • Merklein, M.; Tekkaya, A.; Brosius, A.; Opel, S.; Kwiatkowski, L.; Plugge, B.; Schunck, S.: Machines and Tools for Sheet-Bulk Metal Forming. In: Key Engineering Materials, 473(2011), Schweiz: Trans Tech Publications, pp. 91-98
    • Merklein, M.; Koch, J.; Opel, S.; Schneider, T.: Fundamental investigations on the material flow at combined sheet and bulk metal forming processes. In: Annals of the CIRP, 1(2011)60, Amsterdam: Elsevier, pp. 283-286
    • Hauer, F.; Willner, K.: Elastic-plastic halfspace simulation. In: Proceedings of the 82st Annual Meeting of the International Association of Applied Mathematics and Mechanics, doi: 10.1002/pamm.201110101, (2011), pp. 219-220
    • Hauer, F.; Vierzigmann, U.; Willner, K.; Engel, U.: Numerical simulation of friction in metal forming using a halfspace model. In: AIP Conference Proceedings, The 14th International ESAFORM Conference on Material Forming Esaform 2011, doi: 10.1063/1.3589482, 1353(2011), pp. 1741-1746
    • Behrens, B.; Hübner, S.; Bouguecha, A.; Krimm, R.; Cahyono, T.; Salfeld, V.; Vucetic, M.: Blechmassivumformung - ein neues Verfahren zur Herstellung komplexer Bauteile. In: Prof. Dr.-Ing. B.-A. Behrens (Edt.): (2011), published
    • Biermann, D.; Surmann, T.; Odendahl, S.; Hense, R.: Creating Functional Surface Structures by Milling Using Self-Excited Tool Vibrations(2011), pp. 55–58
    • Plugge, B.; Kwiatkowski, L.; Brosius, A.; Tekkaya, A.: Untersuchung von Umformstrategien zum Einstellen mechanischer Eigenschaften von Werkstücken mittels inkrementellem Blech-Massiv Walzen (2011), Belfast, pp. 193-200
    • Röhner, S.; Breitsprecher, T.; Wartzack, S.: Acquisition of design-relevant knowledge within the development of sheet-bulk metal forming. 6(2011), Kopenhagen, pp. 108-120
    • Schulz, E.; Röhner, S.; Wartzack, S.: Prediction of the Friction Behavior of Lubricated Tribological Systems Containing Amorphous Carbon Coatings Using Artificial Neural Networks(2011), San Diego, published
    • Surmann, T.: Modeling and characterization of surface structures produced by milling(2011), Advanced Materials Research Vol. 223, published
    • Schmaltz, S.; Willner, K.: DOI: 10.1002/pamm.201110208
    • Germain, S.; Steinmann, P.: A comparison between inverse form finding and shape optimization methods for anisotropic hyperelasticity in logarithmic strain space. In: G. Brenn, G.A. Holzapfel, M. Schanz and O. Steinbach (Edt.): 11(2011)1, DOI: 10.1002/pamm.201110175: Proc. Appl. Math. Mech., pp. 367-368
    • Germain, S.; Steinmann, P.: SHAPE OPTIMIZATION FOR ANISOTROPIC ELASTOPLASTICITY IN LOGARITHMIC STRAIN SPACE. In: E. Oñate, D.R.J. Owen, D. Peric and B. Suárez (Eds.) (Edt.): (2011), ISBN 978-84-89925-23-6: COMPUTATIONAL PLASTICITY XI Fundamentals and Applications, pp. 1479-1490
    • Hauer, F.; Willner, K.: Halfspace modeling of elastic-plastic contact of rough surfaces. In: Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI, (2011), pp. 965-975
    • Ohrt, C.; Kästner, M.; Reithmeier, E.; Weickmann, J.; Weckenmann, A.: Optische Inspektion von Blechmassivumformteilen und -werkzeugen mit feinen Nebenformelementen(2011), tm - Technisches Messen: Oldenbourg Verlag, pp. 95 - 102
    • Weckenmann, A.; Behrens, B.; Reithmeier, E.; Akkasoglu, G.; Vucetic, M.; Ohrt, C.; Cahyono, T.; Hübner, S.; Kästner, M.: Appliance of the maturity method in the develpoment of endoscopic geometry inspection for sheet bulk metal forming tools . In: Total Quality Management & Excellence, 39(2011)1, pp. 11-16
    • Salfeld, V.; Krimm, R.; Behrens, B.: Investigations on the process-machine interaction by forming parts with sheet-bulk metal forming(2011), published
    • Soyarslan, C.; Plugge, B.; Faßmann, D.; Isik, K.; Kwiatkowski, L.; Schaper, M.; Brosius, A.; Tekkaya, A.: An experimental and Numerical Assessment of Sheet-Bulk Formability of Mild Steel DC04. In: Journal of Manufacturing Science and Engineering, 133(2011)6, pp. 1-9
    • Merklein, M.; Tekkaya, A.; Brosius, A.; Opel, S.; Koch, J.: Overview on Sheet-Bulk Metal Forming Processes. In: G. Hirt, A.E. Tekkaya (Edt.): Proceedings ICTP 2011, 10(2011), Aachen, pp. 1109-1114
    • Weckenmann, A.; Akkasoglu, G.: Maturity Method for the Development of Metal Forming Processes considering Fuzzy Input Parameters . In: Akkök, M. et al. (Edt.): 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds - DIEMOLD 2011 (23.-26.06.2011, Ankara, Turkey), (2011), Ankara: Atilim University, pp. 9-15
    • Vierzigmann, U.; Merklein, M.; Engel, U.: Friction Conditions in Sheet-Bulk Metal Forming. In: Procedia Engineering, (2011)19, Amsterdam: Elsevier, pp. 377-382
    • Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards the effective behaviour of polycrystalline microstructures at finite strains(2011), COMPLAS XI., Barcelona, Spain, accepted
    • Lehmann, E.; Löhnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation. In: Proc. Appl. Math. Mech., 11(2011)1, pp. 401-402
    • Hetzner, H.; Koch, J.; Tremmel, S.; Wartzack, S.; Merklein, M.: Improved Sheet Bulk Metal Forming Processes by Local Adjustment of Tribological Properties. In: J. Manuf. Sci. Eng, 133(2011)6, pp. 061011
    • Reithmeier, E.; Weckenmann, A.; Behrens, B.; Ohrt, C.; Kästner, M.; Akkasoglu, G.; Hübner, S.; Krimm, R.; Salfeld, V.; Voges-Schwieger, K.; Vucetic, M.: Qualitätsorientierte Entwicklung der Blechmassivumformung . In: Merklein, M. (Edt.): Tagungsband zum Erlanger Workshop Blechmassivumformung 2011 - DFG TR 73 (13.-14.10.2011, Erlangen), (2011), Bamberg: Meisenbach, pp. 97 - 118
    • Biermann, D.; Merklein, M.; Engel, U.; Tillmann, W.; Surmann, T.; Hense, R.; Herper, J.; Koch, J.; Vierzigmann, U.; Krebs, E.: Umformwerkzeuge in der Blechmassivumformung. In: : Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E.; (Edt.): 1. Workshop Blechmassivumformung, 1(2011)1, Bamberg: Meisenbach, pp. 119-138
    • Hassel, T.; Bach, F.: Economic surface hardening by spray cooling. In: Heat Treatment Material (Edt.): 66(2011)5, pp. 290-296
    • Schaper, M.; Lizunkova, Y.; Vucetic, M.; Hetzner, H.; Opel, S.; Schneider, T.; Koch, J.; Plugge, B.: Sheet-bulk metal forming a new process for the production of sheet metal parts with functional components. In: Metallurgical and Mining Industry, 3(2011)7, pp. 53-58
    • Hassel, T.; Lizunkova, Y.; Birr, C.; Bach, F.: Structure and properties of surface zone of high-speed steel 1.3343 after atmospheric plasmanitriding. In: State Key Laboratory of Advanced and joining, HIT (Edt.): (2011), Harbin, China: the 11th International Workshop on Plasma-Based Ion Implantation & Deposition, pp. 50-51
    • Hetzner, H.; Tillmann, W.; Tremmel, S.; Herper, J.: Tribologische Dünnschichten für die Blechmassivumformung. In: Merklein, M.; Bach, F.-W., Tekkaya, A.E. (Edt.): 1. Workshop Blechmassivumformung, (2011), Bamberg: Meisenbach, pp. 139-158
    • Breitsprecher, T.; Hense, R.; Hauer, F.; Biermann, D.: Akquise von heuristischem Wissen für die Prädiktion von Oberflächenstrukturen beim Fräsen mit regenerativen Werkzeugschwingungen. In: DFG SFB TR 73 (Edt.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011, (2011), pp. 77-96
    • Vogli, E.; Tillmann, W.; Herper, J.: Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties. In: Applied Surface Science (Edt.): (2011)257, pp. 8550-8557
    • Krebs, E.; Biermann, D.: Fertigen bionischer Strukturen in einem Mikrofräsprozess. In: wt - Werkstattstechnik online (Edt.): wt - Werkstattstechnik online, 101(2011)11, pp. 742-746
    • Brosius, A.; Soyarslan, C.; Stiemer, M.; Isik, K.; Faßmann, D.; Sieczkarek, P.; Tekkaya, A.; Blum, H.; Schaper, M.; Bach, F.: Numerische und metallurgische Analyse der Werkstoffschädigung in der Blechmassivumformung. In: M. Merklein, Fr.-W. Bach, A.E. Tekkaya (Edt.): Tagungsband zum 1. Workshop Blechmassivumformung, (2011), Bamberg: Meisenbach, pp. 33-50
    • Hassel, T.; Bach, F.: Thermal treatment of contaminated concrete surfaces as a decommissioning method for Nuclear Power Plant Buildings. In: Proceedings of 1st International Conference on Stone and Concrete Machining (Edt.): (2011), Hannover, pp. 129-135
    • Hassel, T.; Bach, F.: Hot-Wire-Plasmaschneiden mit exotherm abreagie-rendem Zusatzwerkstoff zur Erhöhung der Schneidleistung. In: KTG Kerntechnische Gesellschaft e.V. (Edt.): (2011), 10 Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle", pp. 512-534
    • Behrens, B.; Hübner, S.; Krimm, R.; Wager, C; Vucetic, M.; Cahyono, T.: Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses. In: Sheet Metal 2011 - Key Engineering Materials (Edt.): 473(2011), doi:10.4028/www.scientific.net/KEM.473.217, pp. 217-222

    2010

    • Soyarslan, C.; Brosius, A.; Tekkaya, A.: Inverse method for identification of initial yield locus of sheet metals utilizing inhomogeneous deformation fields(2010), published
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Endoskopische Messverfahren in der Mikrotechnik - Erfassung filigraner Mikrogeometrien mithilfe faseroptischer Streifenprojektion(2010), Industrie Management, pp. 29 - 32
    • Ohrt, C.: Endoskopische Geometrieprüfung mit modularen glasfaserbasierten Sensoren(2010), published
    • Ohrt, C.; Kästner, M.; Reithmeier, E.: Optimierung eines endoskopischen Streifenprojektionssystems(2010), Vierter Workshop Optische Technologien Hannoversches Zentrum für optische Technologien Tagungsband, pp. 315-320
    • Wartzack, S.; Hetzner, H.; Röhner, S.: Sonderforschungsbereich/Transregio 'Blechmassivumformung' angelaufen(2010), Konstruktion 11/12-2010, pp. 52, 62
    • Röhner, S.; Wartzack, S.: Anforderungen an die Wissensakquisitionskomponente eines selbstlernenden Assistenzsystems(2010), Magdeburg, pp. 91-96
    • Röhner, S.; Wartzack, S.: Konzept für eine simulationsgetriebene-wissensbasierte Produktentwicklung im Umfeld mechatronischer Systeme(2010), Hamburg, pp. 223-234
    • Behrens, B.; Hübner, S.; Vucetic, M.: Design of a Modular Tool System for the Sheet-Bulk Metal Forming Process(2010), IN-TECH Prag, pp. 562-565
    • Behrens, B.; Krimm, R.; Hübner, S.; Cahyono, T.: Flow Analysis of a Rotary Piston Valve with CFX Mesh Motion Techniques(2010), published
    • Weickmann, J.; Weckenmann, A.; Brenner, P.: Automatic, Task-Sensitive and Simulation-Based Optimization of Fringe Projection Measurements.(2010), Schweiz, published
    • Wartzack, S.; Hetzner, H.; Röhner, S.: Neuer Sonderforschungsbereich/Transregio angelaufen(2010), Bd. 105. ZWF 9 (2010), pp. 762
    • Röhner, S.; Wartzack, S.: Comparison of Predictive Data Mining Methods for their Application in a Design Process(2010), Göteburg, published
    • Röhner, S.; Gruber, G.; Wartzack, S.: Concept for the Architecture of a Self-Learning Engineering Assistance System(2010), Göteburg, published
    • Behrens, B.; Bouguecha, A.; Krimm, R.; Salfeld, V.: Consideration of Machine Properties in FE Analysis of Sheet Metal Forming Processes(2010), 2nd International Conference on Process Machine Interactions (CIRP-PMI), Vancouver, Canada, published on CD
    • Biermann, D.; Surmann, T.; Odendahl, S.; Krebs, E.: Surface Structuring by Milling with Intentionally Invoked Chatter(2010), published on CD
    • Behrens, B.; Hübner, S.; Vucetic, M.: Integration of an Active Forming Die in a Modular Tool System for Sheet-Bulk Metal Forming(2010), IDDRG Graz, published
    • Biermann, D.; Kersting, P.: A measuring device for experimental modal analysis of thin-walled workpieces on five-axis milling machines(2010), International Journal of Material Forming, pp. 451-454
    • Soyarslan, C.; Tekkaya, A.: A damage coupled orthotropic finite plasticity model for sheet metal forming: CDM approach(2010), pp. 150-165
    • Kahnis, P.; Biermann, D.: Mikrofräsen filigraner Strukturen in Formeinsätzen(2010), published
    • Behrens, B.; Hübner, S.; Vucetic, M.: Materialcharakterisierung für die Blechmassivumformung(2010), published
    • Tillmann, W.; Vogli, E.; Herper, J.: Nanostructured bionic PVD-coatings for forming tools. In: Key Engineering Materials (Edt.): (2010), pp. 41-48
    • Hassel, T.; Birr, C.; Bach, F.: Surface zone modification by atmospheric plasma-nitriding (APN) with the aid of the transmitted plasma-arc. In: Key Engineering Materials (Edt.): 438(2010), pp. 147-154
    • Brenner, P.; Weckenmann, A.; Akkasoglu, G.: Referenzmodellgestützte Reifegradabsicherung bei der Entwicklung neuer umformtechnischer Verfahren . In: Schmitt, R. (Edt.): Berichte zum Qualitätsmanagement - Unternehmerisches Qualitätsmanagement, 12(2010), Aachen: Apprimus, pp. 123-144
    • Lehmann, E.; Löhnert, S.; Wriggers, P.: Modelling Metals at Finite Deformation. In: Proc. Appl. Math. Mech., 10(2010)1, pp. 305-306
    • Germain, S.; Steinmann, P.: On Inverse Form Finding for Anisotropic Hyperelasticity in Logarithmic Strain Space2(2010)2, IJSCS: Int. J. of Structural Changes in Solids - Mechanics and Applications, pp. 1-16
    • Merklein, M.; Opel, S.; Schneider, T.: Herstellung funktionaler Blechkomponenten. In: wt Werkstattstechnik online, 11(2010), Düsseldorf: Springer, pp. 910-915
    • Vierzigmann, U.; Merklein, M.; Engel, U.: Tailored Surfaces in Sheet-Bulk Metal Forming. In: Felder, E.; Montmitonnet P. (Edt.): Proc. 4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP), 2(2010), Paris: Transvalor - Presses des MINES, pp. 541-550
    • Weckenmann, A.; Brenner, P.; Akkasoglu, G.: A comprehensive approach for a reference model based maturity method for development of new metal forming processes. In: 13th International QMOD conference on Quality and Service Sciences ICQSS 2010 (30.08.-01.09.2010, Cottbus, Germany), (2010), published on CD
    • Weckenmann, A.; Akkasoglu, G.: Managing the challenges in development processes with the maturity method . In: Satyanarayana, B.; Ramji, K. (Edt.): Proceedings of the 3rd International and 24th All India Manufacturing Technology Design and Research Conference AIMTDR 2010 (13.-15.12.2010, Andhra Pradesh, India), 1(2010), Visakhapatnam: Andhra University College of Engineering, pp. 3-10
    • Brenner, P.; Akkasoglu, G.; Weckenmann, A.: Reifegradmethode für neue Fertigungsverfahren - Rasch und sicher auf neue Wege. In: Qualität und Zuverlässigkeit QZ, 55(2010)6, München: Hanser, pp. 52-55
    • Weckenmann, A.; Brenner, P.; Akkasoglu, G.: Reifegradmethode für die Entwicklung neuer Umformverfahren. In: Ingenieurspiegel, (2010)3, pp. 56-58
    • Germain, S.; Steinmann, P.: On Inverse Form Finding For Anisotropic Materials. In: Prof. Christian Wieners (Edt.): 10(2010)1, doi>10.1002/pamm.201010072: Proc. Appl. Math. Mech., pp. 159-160
    • Merklein, M.; Opel, S.: Investigation of Tailored Blank Production by the New Process Class Sheet-Bulk Metal Forming . In: F. Chinesta, Y. Chastel, M.E. Mansori (Edt.): International Conference on Advances in Materials and Processing Technologies (AMPT2010), 1315(2010), Melville, USA: AIP Conference Proceedings, pp. 395-400
    • Hauer, F.; Willner, K.: Normal contact simulation of non-Gaussian fractal surfaces. In: Proceedings of the 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, doi>10.1002/pamm.201010198, 10(2010), pp. 411-412
    • Weber, C.; Löhnert, S.; Wriggers, P.: Aspects of the Facet-Edge Data Structure for the Construction of Voronoi Cells. In: Proc. Appl. Math. Mech., 10(2010)1, pp. 645 – 646
    • Merklein, M.; Koch, J.; Schneider, T.; Opel, S.; Vierzigmann, U.: Manufacturing of Complex Functional Components with Variants by Using a new Metal Forming Process – Sheet-Bulk Metal Forming. In: International Journal of Metrial Forming, (2010), Paris: Springer, pp. 347-350
    • Große-Wöhrmann, A.; Blum, H.; Stiemer, M.: A posteriori control of modelling errors in linear elasticity. In: Proceedings in Applied Mathematics and Mechanics, 10(2010), pp. 647-648
    • Stiemer, M.; Brosius, A.; Blum, H.; Tekkaya, A.; Merklein, M.: Blechmassivumformung - Potential, technologische Herausforderung und numerische Simulation der umformtechnischen Herstellung komplexer Funktionsbauteile mit Nebenformen aus Blechen. In: Simufact Engineering GmbH (Edt.): Proceedings of the 12th RountTable - Simulation in der Massivumformung, (2010), Bamberg, pp. 221-238
    • Behrens, B.; Hübner, S.; Vucetic, M.: Material Characterization for a Simultaneous Combined Sheet-Bulk Metal Forming. In: International Symposium on Plasticity (Edt.): (2010), published

    2009

    • Merklein, M.: Manufacturing of complex functional components with variants by using a new sheet metal forming process. In: Ruan, X.-Y. (Hrsg.): Proc. of 42nd ICFG Plenary Meeting(2009), published
    • Weickmann, J.; Brenner, P.; Weckenmann, A.: Reconstruction of noisy measured sharp edges at thin sheet metal components.(2009), published
    • Weickmann, J.; Weckenmann, A.; Brenner, P.: Automatic, Task-Sensitive and Simulation-Based Optimization of Fringe Projection Measurement.(2009), published
    • Hassel, T.; Bach, F.: Manufacturing surface hardened components of 42CrMo4 by water-air spray cooling. In: Steel Research International (Edt.): 80(2009), pp. 906-915
    • Bach, F.; Behrens, B.; Hassel, T.: Integrierte Wärmebehandlung komplexer Präzisionsschmiedebauteile mittels einer prozess- und geometrieangepassten Zwei-Phasen-Spraykühlung. In: 3rd International Conference on Accuracy in Formin Technology (Edt.): (2009), pp. 283-301

    0000

    • Matthias, S.; Schlobohm, J.; Kästner, M.; Reithmeier, E.: Fringe projection profilometry using rigid and flexible endoscopes. In: tm-Technisches Messen, 842, De Gruyter, published