TR73

  • Increase font size
  • Default font size
  • Decrease font size


A6 - Function-oriented Inspection (funding period 2)



Strategies for function-oriented optical inspection of formed precision components

Project Status: finished

Last Update: 23.01.2017



Members


Sheet-bulk metal forming parts require proper inspection systems and strategies cause of their high demands on measurement accuracy and time. Basic principles of inspection techniques and strategies were the main research interests in the first phase. Their further development towards a production-related inspection process, which requires no user, is done in the second phase. Therefore the hardware as well as the software of the multi-scale multi-component fringe projection system has to be adapted to autonomous operations, just as appropriate interfaces for the integration of other measurement systems has to be created.


Working Groups


Publications

    2017

    • Loderer, A.: Holistische, fertigungsnahe, mehrskalige Messung blechmassivumgeformter Bauteile. In: Tino Hausotte (Edt.): Schriftenreihe des Lehrstuhls für Fertigungsmesstechnik, (2017), Aachen: Shaker Verlag, published

    2016

    • Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner, S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B.: Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process. In: Production Engineering, 10(2016)1, DOI 10.1007/s11740-015-0647-2, pp. 51-61
    • Loderer, A.; Hausotte, T.: Qualification concept for optical multi-scale multi-sensor systems. In: Journal of Sensors and Sensor Systems JSSS, 5(2016)1, pp. 1-8
    • Küstner, C.; Beyer, F.; Kumor, D.; Loderer, A.; Wartzack, S.; Willner, K.; Blum, H.; Rademacher, A.; Hausotte, T.: Simulation-based development of Pareto-optimized tailored blanks for the use within sheet-bulk metal forming. In: Marjanovic, D.; Storga, M.; Pavkovic, N.; Bojcetic, N.; Skec, S. (Edt.): DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, (2016), Design Society, pp. 291-300
    • Loderer, A.; Hausotte, T.: Ganzheitliche dimensionelle Messung von blechmassivumgeformten Bauteilen. In: Stefan Zimmermann (Edt.): XXX. Messtechnisches Symosium 2016, (2016), Berlin: DE Gruyter, pp. 133-140

    2015

    • Behrens, B.; Hübner, S.; Vucetic, M.; Koch, S.; Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.; Hausotte, T.; Loderer, A.: Prozessauslegung und Untersuchung von geschliffenen und CrAlN / CrAlCN-beschichteten Werkzeugoberflächen mittels schwingungsüberlagertem Flachstauchversuch für die Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 173 - 192
    • Löffler, M.; Freiburg, D.; Gröbel, D.; Loderer, A.; Matthias, S.; Stangier, D.; Weikert, T.: Untersuchung von Tailored Surfaces hinsichtlich ihres tribologischen Einflusses auf Prozesse der Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 131-146
    • Landkammer, P.; Söhngen, B.; Loderer, A.; Krebs, E.; Steinmann, P.; Willner, K.; Hausotte, T.; Kersting, P.; Biermann, D.: Experimentelle Verifizierung eines Benchmark-Umformprozesses. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 91-110
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying Measuring Systems by using Six Sigma. In: Key Engineering Materials, 637(2015), pp. 37-43
    • Loderer, A.; Timmermann, M.; Matthias, S.; Kästner, M.; Schneider, T.; Hausotte, T.; Reithmeier, E.: Measuring systems for sheet-bulk metal forming. In: Key Engineering Materials, 639(2015), pp. 291-298
    • Landkammer, P.; Loderer, A.; Krebs, E.; Söhngen, B.; Steinmann, P.; Hausotte, T.; Kersting, P.; Biermann, D.; Willner, K.: Experimental verification of a benchmark forming simulation. In: Key Engineering Materials, 639(2015), pp. 251-258
    • Loderer, A.; Timmermann, M.; Hausotte, T.: Methodical approach for selecting an appropriate sensor of a multi-sensor fringe projection system.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
    • Timmermann, M.; Weinert, B.; Schuler, A.; Loderer, A.; Hausotte, T.: Fibre-optical 3-D measurement of highly curved free-form surfaces.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
    • Hartmann, W.: Mess- und Auswertestrategien zur modellbasierten Bewertung funktionaler Eigenschaften mikrostrukturierten Oberflächen. In: Weckenmann, A. (Edt.): Berichte aus dem Lehrstuhl Qualitätsmanagement und Fertigungsmesstechnik, 30(2015), Aachen: Sharker, published
    • Loderer, A.; Hartmann, W.; Hausotte, T.: Calibration Concept for Dimensional Measurements with Optical Multiscale Multi-Sensor Systems. In: AMA Service GmbH (Edt.): AMA Conferences 2015 - SENSOR 2015 and IRS² 2015, (2015), Wunstdorf: AMA Service GmbH, pp. 447-452

    2013

    • Weckenmann, A.; Hartmann, W.: Function-oriented Measurements - the Path from Macro to Micro and Nano Range. In: Aguilar Martin, J.; Yagäe Fabra, J.; Lope Domingo, M.; Santolaria Mazo, J.; Albajez Garcia, J. (Edt.): Proceedings of the 5th Manufacturing Engineering Society International Conference (5th Manufacturing Engineering Society International Conference - MESIC 2013, (2013), Zaragoza, Spain, published
    • Hartmann, W.; Weckenmann, A.: Function-Oriented Dimensional Metrology - More than Determining Size and Shape. In: AMA Service GmbH (Edt.): Proceedings of AMA Conferences 2013 with SENSOR, OPTO, IRS² (Sensor 2013 - 16th International Conference on Sensors and Measurement Technology, Nürnberg, 14.–16.05.2013), (2013), pp. 285-290
    • Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.: Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), Bamberg: Meisenbach, pp. 101-118
    • Weckenmann, A.; Hartmann, W.: Function-oriented Measurements – the Path from Macro to Micro and Nano Range. In: Procedia Engineering, 63(2013), Amsterdam: Elsevier, pp. 861 - 872
    • Hartmann, W.; Loderer, A.: Measurement procedures and evaluations methods for the extraction and assessment of functional features of microstructured surfaces. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 61
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying measuring systems by using Six Sigma. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 93
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Measurement strategy for a production-related multi-scale inspection of formed work pieces.. In: Seliger, G. (Edt.): Proceedings of the 11th Global Conference on Sustainable Manufacturing - Innovative Solutions, (2013), Berlin: Universitätsverlag der TU Berlin, pp. 148-153