TR73

  • Increase font size
  • Default font size
  • Decrease font size


Dipl.-Ing. (FH) Manfred Vogel



Friedrich-Alexander-Universität Erlangen-Nürnberg
Egerlandstraße 13, 91058 Erlangen
Tel.: 09131/85-28285
Fax: 09131/85-27141
Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Homepage at the Institute



Projects

  • A1 - Deep Drawing
    Process Combination for Manufacturing of Teethed, Thin-walled Functional Components out of Tailored Blanks
  • A1 - Deep Drawing (funding period 2)
    Process combination for manufacturing of teethed, thin-walled functional components out of tailored blanks

Working Groups


Publications

    2021

    • Vogel, M.; Schulte, R.; Kaya, O.; Merklein, M.: Manufacturing of tailored blanks with pre-shaped involute gearings by using a flexible rolling process and its application in a sheet-bulk metal forming process. In: The 13th International Conference on the Technology of Plasticity, (2021), accepted

    2020

    • Vogel, M.; Schulte, R.; Hetzel, A.; Lechner, M.; Merklein, M.: Verfahrenskombination zur umformtechnischen Herstellung von verzahnten, dünnwandigen Funktionselementen aus prozessoptimierten Halbzeugen. In: Bernd-Arno Behrens (Edt.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, (2020), Hannover: TEWISS, pp. 178

    2019

    • Vogel, M.; Schulte, R.; Freiburg, D.; Lechner, M.; Biermann, D.; Merklein, M.: Maßgeschneiderte Werkzeugoberflächen in einem flexibeln Walzprozess. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): 4. Workshop Blechmassivumformung, (2019), FAU University Press, pp. 89-108
    • Vogel, M.; Merklein, M.: Manufacturing of tailored blanks by orbital forming with a two-sided material thickening. In: Journal of Material Processing Technology, (2019), pp. 116491
    • Gutknecht, F.; Vogel, M.; Schulte, R.; Merklein, M.; Rosenbusch, D.; Koch, S.; Hübner, S.; Behrens, B.; Tekkaya, A.; Clausmeyer, T.: Comparison of Strain-path Indicators for Analysis of Processes in Sheet-bulk Metal Forming. In: Yannis Korkolis, Brad Kinsey, Marko Knezevic, and Nikhil Padhye (Edt.): Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, (2019), pp. 123-126
    • Vogel, M.; Merklein, M.: Flexible rolling of rotational symmetric tailored blanks with a two-sided thickness profile. In: Procedia Manufacturing, (2019), pp. 139-146

    2018

    • Hildenbrand, P.; Lechner, M.; Vogel, M.; Herrmann, H.; Merklein, M.: Orbital forming of tailored blanks with two-sided local material thickening. In: The International Journal of Advanced Manufacturing Technology, 97(2018), pp. 1-10
    • Vogel, M.; Merklein, M.: Oberflächenanalyse von Tailored Blanks hergestellt durch ein Taumelverfahren. In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, Bruno Buchmayr (Edt.): XXXVII. Verformungskundliches Kolloquium, (2018), pp. 91-96

    2017

    • Kirchen, I.; Vogel-Heuser, B.; Hildenbrand, P.; Schulte, R.; Lechner, M.; Vogel, M.; Merklein, M.: Data-driven Model Development for Quality Prediction in Forming Technology. In: 15th IEEE International Conference on Industrial Informatics (INDIN), (2017), pp. 775-780
    • Schulte, R.; Frey, P.; Hildenbrand, P.; Vogel, M.; Betz, C.; Lechner, M.; Merklein, M.: Data-Based Control of A Multi-Step Forming Process. In: Journal of Physics: Conference Series, (2017), pp. 012037
    • Schulte, R.; Hildenbrand, P.; Vogel, M.; Lechner, M.; Merklein, M.: Analysis of fundamental dependencies between manufacturing and processing Tailored Blanks in sheet-bulk metal forming processes. In: Procedia Engineering, (2017), pp. 305-310
    • Schulte, R.; Lechner, M.; Vogel, M.; Hildenbrand, P.; Merklein, M.: Umformtechnische Herstellung von Funktionsbauteilen aus Tailored Blanks durch Blechmassivumformverfahren. In: 22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017, (2017), published
    • Vogel, M.; Lechner, M.; Hildenbrand, P.; Schulte, R.; Merklein, M.: Manufacturing of tailored blanks by flexible rolling and its application in a sheet-bulk metal forming process. In: Wieland (Edt.): Proceedings SCT2017, (2017), Verlag Stahleisen GmbH, published on CD