TR73

  • Schrift vergrößern
  • Standard-Schriftgröße
  • Schriftgröße verkleinern


Prof. Dr.-Ing. Dirk Biermann



Technische Universität Dortmund
Institut für Spanende Fertigung, Baroper Str. 301, 44227 Dortmund
Tel.: +49 (0)231 755 2782
Fax: +49 (0)231 755 2782
E-Mail: Diese E-Mail-Adresse ist gegen Spambots geschützt! Sie müssen JavaScript aktivieren, damit Sie sie sehen können.
Lehrstuhl-Homepage



Projekte


Arbeitskreise


Veröffentlichungen

    2021

    • Platt, T.; Biermann, D.: Functionalization of Tool Topographies for Material Flow Control and Tool Life Optimization in Hot Sheet-Bulk Metal Forming – A Concept Study. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Hrsg.): Sheet Bulk Metal Forming, (2021), Springer Nature Switzerland AG, S. 0
    • Meijer, A.; Biermann, D.: Machining of Molds with Filigree Structures for Sheet-Bulk Metal Forming. In: M. Merklein, A.E. Tekkaya, B.-A. Behrens (Hrsg.): Sheet Bulk Metal Forming - Research Results of the TCRC73, (2021), Springer Nature Switzerland AG, S. 141-171
    • Platt, T.; Meijer, A.; Merhofe, T.; Biermann, D.: Simulation-Based and Experimental Investigation of Micro End Mills with Wiper Geometry. In: Micromachines (Hrsg.): Micro-Manufacturing and Applications: Advanced Micro Processing Technology, Devices and Equipment, Volume II, 12(2021)5, S. 496
    • Wild, T.; Platt, T.; Biermann, D.; Merklein, M.: Analysis of the Influence of Surface Modifications on the Fatigue Behavior of Hot Work Tool Steel Components. In: Materials, 14(2021)23, S. 1-15
    • Meijer, A.; Merhofe, T.; Platt, T.; Biermann, D.: Algorithmen-basierte Freiformflächenstrukturierung/Generation of NC programs for the micromilling structuring of free-form surfaces – Algorithm-based free-form surface structuring. In: wt Werkstattstechnik online (Hrsg.): 111(2021), S. 797–802

    2020

    • Tillmann, W.; Stangier, D.; Hagen, L.; Biermann, D.; Freiburg, D.; , .: Tribological investigation of surface structures processed by high-feed milling in HVOF sprayed WC-12Co coatings. In: Surface & Coatings Technology, 395(2020), S. 125945
    • Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Krebs, E.; Biermann, D.: Tribological Studies on Multi-Coated Forming Tools. In: Journal of Manufacturing Processes, 49(2020), S. 141-152
    • Behrens, B.; Tillmann, W.; Biermann, D.; Hübner, S.; Stangier, D.; Freiburg, D.; , .; Koch, S.; Rosenbusch, D.; , .: Influence of Tailored Surfaces and Superimposed-Oscillation on Sheet-Bulk Metal Forming Operations. In: Journal of Manufacturing Materials Processing, 4(2020), S. 41
    • Behrens, B.; Meijer, A.; Stangier, D.; Hübner, S.; Biermann, D.; Tillmann, W.; Rosenbusch, D.; , .: Static and oscillation superimposed ring compression tests with structured and coated tools for Sheet-Bulk Metal Forming. In: Journal of Manufacturing Processes, 55(2020), S. 78-86
    • Platt, T.; Meijer, A.; Biermann, D.: Conduction-Based Thermally Assisted Micromilling Process for Cutting Difficult-to-Machine Materials. In: Journal of Manufacturing and Materials Processing (Hrsg.): Advanced Manufacturing and Machining Processes, 4(2020)2, S. 34

    2019

    • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the Material flow in sheet-bulk metal forming using modifications of the tool surface. In: International Journal of Material Forming, 12(2019), S. 17-26
    • Freiburg, D.; Aßmuth, R.; Garcia Carballo, R.; Biermann, D.; Henneberg, J.; Merklein, M.: Adaption of tool surface for sheet-bulk metal forming by means of pressurized air wet abrasive jet machining. In: Production Enginieering, 13(2019), S. 71-77
    • Löffler, M.; Schulte, R.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Merklein, M.: Control of the material flow in sheet-bulk metal forming using modifications of the tool surface. In: International Journal of Material Forming, 12(2019), S. 17-26
    • Tillmann, W.; Hagen, L.; Stangier, D.; Paulus, M.; Tolan, M.; Sakarowski, R.; Biermann, D.; Freiburg, D.: Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. In: Surface & Coatings Technology, 374(2019), S. 448-459
    • Vogel, M.; Schulte, R.; Freiburg, D.; Lechner, M.; Biermann, D.; Merklein, M.: Maßgeschneiderte Werkzeugoberflächen in einem flexibeln Walzprozess. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Hrsg.): 4. Workshop Blechmassivumformung, (2019), FAU University Press, S. 89-108
    • , .; Bergmann, J. A. ; Krebs, E.; Biermann, D.; Wiederkehr, P.: Analytical and Simulation-Based Prediction of Surface Roughness for Micromilling Hardened HSS . In: J. Manuf. Mater. Process, 3(2019)3, S. 1-17
    • Biermann, D.; , .; Michel, S.: Optimierung zerspanender Prozesse in kleinsten Dimensionen. In: maschinenbau - Das Schweizer Industriemagazin, 5(2019)1, S. 18,21
    • Baumann, J.; Krebs, E.; Biermann, D.: Chatter avoidance in milling by using advanced cutting tools with structured functional surfaces. In: Modern Machining Science Journal, 1(2019)1, S. 3019-3026
    • Behrens, B.; Biermann, D.; Tillmann, W.; Krimm, R.; Meijer, A.; Schewe, M.; Stangier, D.; Commichau, O.; Müller, P.; Rosenbusch, D.; Menzel, A.: Untersuchungen strukturierter Werkzeugflächen und der Einfluss auf den Werkzeugverschleiß. In: 4. Industriekolloquium Blechmassivumformung 2019 – DFG Transregio 73, (2019), S. 7-30

    2018

    • Krebs, E.; Wolf, M.; Biermann, D.; Tillmann, W.; Stangier, D.: High-quality cutting edge preparation of micromilling tools using wet abrasive jet machining process. In: Production Engineering, 12(2018), S. 45-51
    • Meijer, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.: Prediction of Feed-Rate Slowdowns in Precise Micromilling Processes. In: J. Manuf. Mater. Process, 2(2018)1, MPDI, S. 1-14
    • Biermann, D.; , .; Ott: Präparation von Mikrofräswerkzeugen aus Vollhartmetall mit elastisch gebundenen Schleifkörpern. In: Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen, 68(2018)1, Vulkan Verlag GmbH, S. 80-98
    • Biermann, D.; , .; Krebs, E.; Michel, S.; Jaeger, J.: Neue Entwicklungen für den produktiven Einsatz von Hartmetallwerkzeugen in kleinsten Dimensionen. In: Danninger, H.; Sigl, L.; Broeckmann, C. (Hrsg.): Pulvermetallurgie - neue Herausforderungen und neue Wege, 34(2018)1, Heimdall Verlag, S. 135-155

    2017

    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Improvement strategies for the formfilling in incremental gear forming processes. In: Production Engineering – Research and Development, 11(2017), Springer, S. 623-631
    • Freiburg, D.; Löffler, M.; Merklein, M.; Biermann, D.: Surface structuring of forming tool surfaces by high feed milling. In: WGP Jahreskongress, (2017), veröffentlicht
    • Tillmann, W.; Stangier, D.; Lopes-Dias, N.-F.; Biermann, D.; Krebs, E.: Adjustment of Friction by Duplex-Treated, Bionic Structures for Sheet-Bulk Metal Forming. In: Tribology International, 111(2017), S. 9-17

    2016

    • Kersting, P.; Gröbel, D.; Merklein, M.; Sieczkarek, P.; Wernicke, S.; Tekkaya, A.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; Löffler, M.; Beyer, F.; Willner, K.: Experimental and numcerial analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming. In: Production Engineering, 10(2016)1, Springer, S. 37-50
    • Tillmann, W.; Stangier, D.; Laemmerhirt, I.-A.; Biermann, D.; Freiburg, D.: Investigation of the tribological properties of high-feed milled structures and Cr-based hard PVD-coatings. In: Vacuum, 131(2016), S. 5-13
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Wear Behavior of Tribologically Optimized Tool Surfaces for Incremental Forming Processes. In: Tribology International, 104(2016), S. 64 - 72
    • Löffler, M.; Engel, U.; Schulte, R.; Gröbel, D.; Krebs, E.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Weikert, T.; Wartzack, S.; Tremmel, S.; Lucas, H.; Denkena, B.; Merklein, M.: Tribological measures for controlling material flow in sheet-bulk metal forming. In: Production Engineering, 10(2016), S. 459-470

    2015

    • Hense, R.; Kersting, P.; Vierzigmann, U.; Löffler, M.; Biermann, D.; Merklein, M.; Wels, C.: High-Feed Milling of Tailored Surfaces for Sheet-Bulk Metal Forming Tools. In: Production Engineering, 9(2015)2, S. 215-223
    • Freiburg, D.; Biermann, D.; Hense, R.; Tillmann, W.; Stangier, D.: Influence of Surface Modifications on Friction, Using High-Feed Milling and Wear Resistant PVD-Coating for Sheet-Metal Forming Tools. In: Key Engineering Materials, 639(2015), S. 275-282
    • Landkammer, P.; Söhngen, B.; Loderer, A.; Krebs, E.; Steinmann, P.; Willner, K.; Hausotte, T.; Kersting, P.; Biermann, D.: Experimentelle Verifizierung eines Benchmark-Umformprozesses. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Hrsg.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, S. 91-110
    • Landkammer, P.; Loderer, A.; Krebs, E.; Söhngen, B.; Steinmann, P.; Hausotte, T.; Kersting, P.; Biermann, D.; Willner, K.: Experimental verification of a benchmark forming simulation. In: Key Engineering Materials, 639(2015), S. 251-258
    • Stangier, D.; Tillmann, W.; Krebs, E.; Kersting, P.; Biermann, D.; Hagen, L.: Wear Behavior of Bio-inspired and Technologically Structured HVOF Sprayed NiCrBSiFe Coatings. In: Surface and Coatings Technology, 280(2015), S. 16-26
    • Freiburg, D.; Kersting, P.; Biermann, D.: Simulation and Structuring of Complex Surface Areas using High Feed Milling. In: 8th Iinternatinal Conference and Exhibition on Design and Production of Machines and Dies/Molds, 8(2015), Kusadasi, Aydin, TURKEY, S. 93-98
    • Lucas, H.; Denkena, B.; Grove, T.; Krebs, E.; Kersting, P.; Freiburg, D.; Biermann, D.: Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling. In: HTM Journal of Heat Treatment and Materials, 70(2015)4, S. 183-189
    • Tillmann, W.; Stangier, D.; Biermann, D.; Kersting, P.; Krebs, E.; Hagen, L.: Tribological investigation of bionic and micro-structured functional surfaces. In: Materialwissenschaft und Werkstofftechnik, 46(2015)11, S. 1096-1104
    • Freiburg, D.; Hense, R.; Biermann, D.; Kersting, P.: Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques. In: J. Manuf. Sci. Eng., 138(2015)4, S. 6

    2014

    • Biermann, D.; Kersting, P.; Odendahl, S.; Joliet, R.; Zabel, A.: Simulation der NC-Fräsbearbeitung – Multiskaliger Ansatz für eine effiziente und flexible Simulation147(2014)6, WB – Werkstatt und Betrieb, S. 78-81

    2013

    • Biermann, D.; Tillmann, W.; Herper, J.: New coating systems for temperature monitoring in turning processes. In: Surface & Coatings Technology, 215(2013), S. 376-380
    • Vierzigmann, U.; Schneider, T.; Koch, J.; Merklein, M.; Engel, U.; Hense, R.; Biermann, D.; Krebs, E.; Kersting, P.; Lucas, H.; Denkena, B.; Herper, J.; Tillmann, W.; Stangier, D.: Untersuchungen von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Hrsg.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, S. 137-162
    • Biermann, D.; Krebs, E.; Steiner M.: Investigation of Different Hard Coatings for Micromilling of Austenitic Stainless Steel. In: Procedia CIRP, 7(2013), S. 246-251
    • Breitsprecher, T.; Hense, R.; Beyer, F.; Biermann, D.; Wartzack, S.; Willner, K.: Sensitivitätsanalyse der tribologischen Eigenschaften gefräster Oberflächenstrukturen bei der Blechmassivumformung. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Hrsg.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, S. 121-136

    2012

    • Kersting, P.; Krebs, E.; Biermann, D.: Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel. In: Engineering (Hrsg.): (2012), akzeptiert
    • Breitsprecher, T.; Hense, R.; Hauer, F.; Wartzack, S.; Biermann, D.; Willner, K.: Acquisition of heuristic knowledge for the prediction of the frictional behavior of surface structures created by self-excited tool vibrations. In: Key Engineering Materials, 504(2012), Trans Tech Publications, S. 963-968
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Biermann, D.; Tillmann, W.; Herper, J.: Improved Tool Surfaces for Incremental Bulk Forming Processes of Sheet Metals. In: Key Engineering Materials (Hrsg.): 504(2012), S. 975-980
    • Krebs, E.; Kersting, P.; Biermann, D.: Using NC-path deformation for compensating tool deflections in micromilling of hardened steel. In: Procedia CIRP (Hrsg.): 1(2012), S. 132-137
    • Biermann, D.; Surmann, T.; Hense, R.: Korrektur von gemessenen Zerspankräften beim Fräsen. In: wt-online, (2012), S. 789–794

    2011

    • Krebs, E.; Biermann, D.: Micromilling of Bionic Structures(2011), veröffentlicht
    • Krebs, E.; Baschin, A.; Biermann, D.: Manufacturing of dies from hardened tool steels by 3-axis micromilling(2011), veröffentlicht
    • Biermann, D.; Surmann, T.; Odendahl, S.; Hense, R.: Creating Functional Surface Structures by Milling Using Self-Excited Tool Vibrations(2011), S. 55–58
    • Biermann, D.; Merklein, M.; Engel, U.; Tillmann, W.; Surmann, T.; Hense, R.; Herper, J.; Koch, J.; Vierzigmann, U.; Krebs, E.: Umformwerkzeuge in der Blechmassivumformung. In: : Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E.; (Hrsg.): 1. Workshop Blechmassivumformung, 1(2011)1, Bamberg: Meisenbach, S. 119-138
    • Breitsprecher, T.; Hense, R.; Hauer, F.; Biermann, D.: Akquise von heuristischem Wissen für die Prädiktion von Oberflächenstrukturen beim Fräsen mit regenerativen Werkzeugschwingungen. In: DFG SFB TR 73 (Hrsg.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011, (2011), S. 77-96
    • Krebs, E.; Biermann, D.: Fertigen bionischer Strukturen in einem Mikrofräsprozess. In: wt - Werkstattstechnik online (Hrsg.): wt - Werkstattstechnik online, 101(2011)11, S. 742-746

    2010

    • Biermann, D.; Surmann, T.; Odendahl, S.; Krebs, E.: Surface Structuring by Milling with Intentionally Invoked Chatter(2010), auf CD veröffentlicht
    • Biermann, D.; Kersting, P.: A measuring device for experimental modal analysis of thin-walled workpieces on five-axis milling machines(2010), International Journal of Material Forming, S. 451-454
    • Kahnis, P.; Biermann, D.: Mikrofräsen filigraner Strukturen in Formeinsätzen(2010), veröffentlicht

    Vorträge

      2018

      • 15.11.2018: Biermann, D.: Neue Entwicklungen für den produktiven Einsatz von Hartmetallwerkzeugen in kleinsten Dimensionen, Hagener Symposium, Fachverband für Pulvermetallurgie, Hagen

      2016

      • 08.03.2016: Krebs, E.; Biermann, D.: Aktuelle Entwicklungen um Zerspanprozesse auf Hochleistungswerkstoffe einzustellen, Nürtingen

      2015

      • 17.03.2015: Biermann, D.; Freiburg, D.; Hense, R.; Tillmann, W.; Stangier, D.: Influence of surface modifications on friction, using high-feed milling and wear resistant PVD-coating for sheet-metal forming tools, Erlangen, Germany
      • 11.05.2015: Tillmann, W.; Stangier, D.; Biermann, D.; Kersting, P.; Krebs, E.: Surface modification by means of multilayer systems and micromilling technology, Long Beach USA

      2014

      • 24.06.2014: Biermann, D.; Krebs, E.; Kersting, P.: Laserunterstütztes Mikrotiefbohren und Mikrofräsen zur Strukturierung von Oberflächen, 11. MST-Regionalkonferenz Dortmund

      2012

      • 26.01.2012: Kersting, P.; Krebs, E.; Biermann, D.; Herper, J.; Tillmann, W.: Micromilling of bio-inspired surface structures for forming tools in sheet-bulk metal forming, CIRP January Meeting, Paris, STC S
      • 14.03.2012: Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Biermann, D.; Tillmann, W.; Herper, J.: Improved tool surfaces for incremental bulk forming processes of sheet metals, ESAFORM Conference 2012, Erlangen, Germany
      • 04.06.2012: Krebs, E.; Kersting, P.; Biermann, D.: Using NC-path deformation for compensating tool deflections in micromilling of hardened steel, Zürich (Schweiz)

      2011

      • 13.10.2011: Biermann, D.; Merklein, M.; Tillmann, W.; Engel, U.; Surmann, T.; Hense, R.; Herper, J.; Koch, J.; Krebs, E.; Vierzigmann, U.: Umformwerkzeuge in der Blechmassivumformung, 1. Workshop Blechmassivumformung, Erlangen, Germany