TR73

  • Schrift vergrößern
  • Standard-Schriftgröße
  • Schriftgröße verkleinern


Bauteileigenschaften und Funktion (Förderperiode 1)



Letztes Update: 29.01.2013


Neue Funktionen durch neue Produktionsverfahren

Die Blechmassivumformung erlaubt die Kombination von Tiefziehen und Massivumformung in einem Fertigungsschritt. Hierdurch ist es möglich, Blechbauteile herzustellen, die zusätzlich zu aktuell realisierbaren geometrischen Merkmalen weitere komplexe Funktionselemente wie Zähne oder Rasten aufweisen. Diese Funktionsintegration erlaubt erhebliche Einsparungen bei Bauteilkosten und ‑gewicht.

Die zusätzlichen Funktionen lassen sich nur dann realisieren, wenn der Werkstoff die neuen Anforderungsprofile erfüllt. Dies gilt sowohl für den Fertigungsprozess wie auch für den Lebenszyklus, in dem zum Beispiel abrasiver Verschleiß eine wesentliche Rolle spielt. Um die zusätzlichen Funktionen sicher erfüllen zu können, ist daher eine Modifizierung des Werkstoffes sinnvoll. Neben einer partiellen Wärmebehandlung kommen hier zudem Beschichtungen in Frage, die das Reib- und Verschleißverhalten positiv beeinflussen.

Das Ziel des Arbeitskreis „Bauteileigenschaften und Funktion“ ist es zu identifizieren, welche Gestaltungsmöglichkeiten die Blechmassivumformung bietet, und welche neuen Bauteile sich hierdurch erzeugen lassen, bzw., um welche Funktionen bestehende Bauteile erweitert werden können. Zusätzlich soll abgeschätzt werden, in wieweit Möglichkeiten zur anschließenden Beeinflussung der mechanischen Eigenschaften des Materials genutzt werden müssen, um die Dauerfestigkeit der Bauteile zu gewährleisten.

Im Rahmen dieses Arbeitskreises werden darüber hinaus regelmäßig Seminare zu werkstoffkundlichen Themen durchgeführt.

 

Die nächsten Seminare finden statt am:

05. Mai 2011: Elektronenmikroskopie 2: EBSD-Analyse

09. Juni 2011: Elektronenmikroskopie 3: Transmissionselektronenmikroskopie

07. Juli 2011: Wärmebehandlung der Stähle in Theorie und Praxis

Alle Veranstaltungen finden von 10:00 Uhr bis 16:00 Uhr im Institut für Werkstoffkunde statt.

Anmeldungen per Email an: schaper@iw.uni-hannover.de




Projekte


Beteiligte Personen

Arbeitskreisleiter

    Mitglieder


      Veröffentlichungen

        2020

        • Wernicke, S.; Rosenthal, S.; Hahn, M.; Tekkaya, A.: Incremental Sheet-Bulk Metal Forming by application of thermal-controlled grading mechanisms. In: Lecture Notes in Production Engineering - Sheet-Bulk Metal Forming, (2020), Springer Nature Switzerland AG, akzeptiert
        • Wernicke, S.; Hahn, M.; Tekkaya, A.: Fundamental Research and Process Development for the Manufacturing of Load-Optimized Parts by Incremental Sheet-Bulk Metal Forming. In: Lecture Notes in Production Engineering - Sheet-Bulk Metal Forming, (2020), Springer Nature Switzerland AG, akzeptiert
        • Gallus, S.; Wernicke, S.; Hahn, M.; Tekkaya, A.: T03: Inkrementelle Blechmassivumformung unter Anwendung thermisch gesteuerter Gradierungsmechanismen. In: Poster-Session im Rahmen des 23. Umformtechnischen Kolloquium Hannover – Innovationspotentiale in der Umformtechnik, 04. - 05. März., (2020), veröffentlicht

        2013

        • Breitsprecher, T.; Wartzack, S.: A classification system for secondary design features for the use within sheet-bulk metal forming. In: Lindemann, U.; Srinivasan, V.; Kim, Y.S.; et al. (Hrsg.): DS 75-5: Proceedings of the 19th International Conference on Engineering Design (ICED13), (2013), Seoul: Design Society, S. 039–048
        • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Kersting, P.; Tillmann, W.; Herper, J.: Innovative tools to improve incremental bulk forming processes. In: Key Engineering Materials, 554(2013), S. 1490-1497
        • Sieczkarek, P.; Kwiatkowski, L.; Ben Khalifa, N.; Tekkaya, A.: Novel five-axis forming press for the incremental sheet-bulk metal forming. In: Key Engineering Materials, 554(2013), S. 1478-1483
        • Salfeld, V.; , .; Krimm, R.; Behrens, B.; Sieczkarek, P.; Ben Khalifa, N.; Tekkaya, A.; Hetzner, H.; Tremmel, S.; Wartzack, S.: Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen. In: Merklein,M., Behrens, B.-A., Tekkaya, A. E. (Hrsg.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, 2(2013), Meisenberg Bambach, veröffentlicht
        • Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.: Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück. In: Merklein, M., Behrens, B.-A., Tekkaya, A. E. (Hrsg.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, 2(2013), Meisenberg Bambach, veröffentlicht

        2012

        • Lehmann, E.; Schmaltz, S.; Germain, S.; Faßmann, D.; Weber, C.; Löhnert, S.; Schaper, M.; Steinmann, P.; Willner, K.; Wriggers, P.: Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data. In: ESAFORM 2012 - Key Engineering Materials (Hrsg.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.993, S. 993-998
        • Surmann, T.; Krebs, E.: Optimization of Micromilling by Adjustment of Inclination Angles. In: 1st CIRP Global Web Conference, (2012), akzeptiert
        • Kersting, P.; Krebs, E.; Biermann, D.: Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel. In: Engineering (Hrsg.): (2012), akzeptiert
        • Merklein, M.; Plettke, R.; Schneider, T.; Opel, S.: Manufacturing of sheet metal components with variants using process adapted semi-finished products. In: Key Engineering Materials, 504(2012), Schweiz: Trans Tech Publications, S. 1023-1028
        • Merklein, M.; Opel, S.; Schneider, T.; Koch, J.: Überblick der Blechmassivumformung. In: Umformtechnik, 1(2012)3, Bamberg: Meisenbach, S. 42-43
        • Merklein, M.; Plettke, R.; Opel, S.: Orbital forming of tailored blanks from sheet metal. In: Annals of the CIRP, 1(2012)61, Amsterdam: Elsevier, S. 263-266
        • Faßmann, D.; Schaper, M.; Bach, F.: Investigation of Ductile Damage Development in Ferritic Steel Subject to Uniaxial Deformation. In: Fatigue and Fracture of Engineering Materials and Structures , (2012), veröffentlicht
        • Lehmann, E.; Löhnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation. In: Technische Mechanik, 32(2012)2, S. 369-379
        • Vierzigmann, U.; Koch, J.; Merklein, M.; Engel, U.: Material Flow in Sheet-Bulk Metal Forming. In: Key Engineering Materials, 504(2012), Durnten-Zurich: Trans Tech Publications, S. 1035-1040
        • Krebs, E.; Kersting, P.; Biermann, D.: Using NC-path deformation for compensating tool deflections in micromilling of hardened steel. In: Procedia CIRP (Hrsg.): 1(2012), S. 132-137
        • Faßmann, D.; Nürnberger, F.; Schaper, M.; Bach, F.: Präparationsroutine zur in-situ Dehnuntersuchung des Tiefziehstahls DC04 mittels Transmissionselektronenmikroskopie. In: Praktische Metallographie, 49(2012)9, S. 577-587
        • Schmaltz, S.; Willner, K.: Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation. In: Proc. of ISEM-ACEM-SEM-7th ISEM’12-Taipei Conference, (2012), Taipei, Taiwan (R.O.C.), veröffentlicht
        • Nürnberger, F.; Faßmann, D.; Schaper, M.: Numerical investigation of in situ TEM tensile tests. In: Metallurgical and Mining Industry , 4(2012)4, S. 37-44
        • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.: Blechumformen läuft jetzt ab Losgröße 1. In: VDI (Hrsg.): VDI Nachrichten, 33(2012), S. 17

        2011

        • Lehmann, E.; Schmaltz, S.; Faßmann, D.; Germain, S.; Weber, C.; Löhnert, S.; Schaper, M.; Bach, F.; Steinmann, P.; Willner, K.; Wriggers, P.: Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten(2011), In: M. Merklein, Fr.-W. Bach, A.E. Tekkaya (Hrsg.): Tagungsband zum 1. Workshop Blechmassivumformung 2011, S. 13-32
        • Vierzigmann, U.; Merklein, M.; Engel, U.: Tribological Conditions in Sheet-Bulk Metal Forming(2011), veröffentlicht
        • Faßmann, D.; Schaper, M.; Bach, F.: Präparations- und Analysestrategie zur Untersuchung verformungsinduzierter Poren in kaltverformtem Stahl(2011), Practical Metallography Band 48, 5/2011, S. 232-238
        • Schmaltz, S.; Willner, K.: Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU(2011), auf CD veröffentlicht
        • Schmaltz, S.; Willner, K.: Identification of the yield surface for sheet steel using an optical measurement system(2011), 10th Youth Symposium on Experimental Solid Mechanics, Chemnitz, Germany, veröffentlicht
        • Krebs, E.; Biermann, D.: Micromilling of Bionic Structures(2011), veröffentlicht
        • Krebs, E.; Baschin, A.; Biermann, D.: Manufacturing of dies from hardened tool steels by 3-axis micromilling(2011), veröffentlicht
        • Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards the effective behaviour of polycrystalline materials for sheet bulk metal forming processes(2011), AIP Conf. Proc., 1353, S. 1179-1184
        • Merklein, M.; Tekkaya, A.; Brosius, A.; Opel, S.; Kwiatkowski, L.; Plugge, B.; Schunck, S.: Machines and Tools for Sheet-Bulk Metal Forming. In: Key Engineering Materials, 473(2011), Schweiz: Trans Tech Publications, S. 91-98
        • Merklein, M.; Koch, J.; Opel, S.; Schneider, T.: Fundamental investigations on the material flow at combined sheet and bulk metal forming processes. In: Annals of the CIRP, 1(2011)60, Amsterdam: Elsevier, S. 283-286
        • Hauer, F.; Vierzigmann, U.; Willner, K.; Engel, U.: Numerical simulation of friction in metal forming using a halfspace model. In: AIP Conference Proceedings, The 14th International ESAFORM Conference on Material Forming Esaform 2011, doi: 10.1063/1.3589482, 1353(2011), S. 1741-1746
        • Plugge, B.; Kwiatkowski, L.; Brosius, A.; Tekkaya, A.: Untersuchung von Umformstrategien zum Einstellen mechanischer Eigenschaften von Werkstücken mittels inkrementellem Blech-Massiv Walzen (2011), Belfast, S. 193-200
        • Schmaltz, S.; Willner, K.: DOI: 10.1002/pamm.201110208
        • Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards the effective behaviour of polycrystalline microstructures at finite strains(2011), COMPLAS XI., Barcelona, Spain, akzeptiert
        • Soyarslan, C.; Plugge, B.; Faßmann, D.; Isik, K.; Kwiatkowski, L.; Schaper, M.; Brosius, A.; Tekkaya, A.: An experimental and Numerical Assessment of Sheet-Bulk Formability of Mild Steel DC04. In: Journal of Manufacturing Science and Engineering, 133(2011)6, S. 1-9
        • Merklein, M.; Tekkaya, A.; Brosius, A.; Opel, S.; Koch, J.: Overview on Sheet-Bulk Metal Forming Processes. In: G. Hirt, A.E. Tekkaya (Hrsg.): Proceedings ICTP 2011, 10(2011), Aachen, S. 1109-1114
        • Vierzigmann, U.; Merklein, M.; Engel, U.: Friction Conditions in Sheet-Bulk Metal Forming. In: Procedia Engineering, (2011)19, Amsterdam: Elsevier, S. 377-382
        • Lehmann, E.; Löhnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation. In: Proc. Appl. Math. Mech., 11(2011)1, S. 401-402
        • Hetzner, H.; Koch, J.; Tremmel, S.; Wartzack, S.; Merklein, M.: Improved Sheet Bulk Metal Forming Processes by Local Adjustment of Tribological Properties. In: J. Manuf. Sci. Eng, 133(2011)6, S. 061011
        • Merklein, M.; Behrens, B.; Plettke, R.; Krimm, R.; Opel, S.; Schneider, T.; Salfeld, V.: Integrierte Fertigung von tiefgezogenen Blechbauteilen mit Verzahnungselementen unter Einsatz von prozessangepassten Halbzeugen. In: M. Merklein (Hrsg.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011, (2011), Bamberg: Meisenbach, S. 159-180
        • Biermann, D.; Merklein, M.; Engel, U.; Tillmann, W.; Surmann, T.; Hense, R.; Herper, J.; Koch, J.; Vierzigmann, U.; Krebs, E.: Umformwerkzeuge in der Blechmassivumformung. In: : Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E.; (Hrsg.): 1. Workshop Blechmassivumformung, 1(2011)1, Bamberg: Meisenbach, S. 119-138
        • Krebs, E.; Biermann, D.: Fertigen bionischer Strukturen in einem Mikrofräsprozess. In: wt - Werkstattstechnik online (Hrsg.): wt - Werkstattstechnik online, 101(2011)11, S. 742-746

        2010

        • Wartzack, S.; Hetzner, H.; Röhner, S.: Sonderforschungsbereich/Transregio 'Blechmassivumformung' angelaufen(2010), Konstruktion 11/12-2010, S. 52, 62
        • Wartzack, S.; Hetzner, H.; Röhner, S.: Neuer Sonderforschungsbereich/Transregio angelaufen(2010), Bd. 105. ZWF 9 (2010), S. 762
        • Kahnis, P.; Biermann, D.: Mikrofräsen filigraner Strukturen in Formeinsätzen(2010), veröffentlicht
        • Tillmann, W.; Vogli, E.; Herper, J.: Nanostructured bionic PVD-coatings for forming tools. In: Key Engineering Materials (Hrsg.): (2010), S. 41-48
        • Hassel, T.; Birr, C.; Bach, F.: Surface zone modification by atmospheric plasma-nitriding (APN) with the aid of the transmitted plasma-arc. In: Key Engineering Materials (Hrsg.): 438(2010), S. 147-154
        • Vierzigmann, U.; Merklein, M.; Engel, U.: Tailored Surfaces in Sheet-Bulk Metal Forming. In: Felder, E.; Montmitonnet P. (Hrsg.): Proc. 4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP), 2(2010), Paris: Transvalor - Presses des MINES, S. 541-550
        • Merklein, M.; Opel, S.; Schneider, T.: Herstellung funktionaler Blechkomponenten. In: wt Werkstattstechnik online, 11(2010), Düsseldorf: Springer, S. 910-915
        • Merklein, M.; Opel, S.: Investigation of Tailored Blank Production by the New Process Class Sheet-Bulk Metal Forming . In: F. Chinesta, Y. Chastel, M.E. Mansori (Hrsg.): International Conference on Advances in Materials and Processing Technologies (AMPT2010), 1315(2010), Melville, USA: AIP Conference Proceedings, S. 395-400
        • Weber, C.; Löhnert, S.; Wriggers, P.: Aspects of the Facet-Edge Data Structure for the Construction of Voronoi Cells. In: Proc. Appl. Math. Mech., 10(2010)1, S. 645 – 646
        • Lehmann, E.; Löhnert, S.; Wriggers, P.: Modelling Metals at Finite Deformation. In: Proc. Appl. Math. Mech., 10(2010)1, S. 305-306
        • Merklein, M.; Koch, J.; Schneider, T.; Opel, S.; Vierzigmann, U.: Manufacturing of Complex Functional Components with Variants by Using a new Metal Forming Process – Sheet-Bulk Metal Forming. In: International Journal of Metrial Forming, (2010), Paris: Springer, S. 347-350

        Vorträge

          2013

          • 19.08.2013: Breitsprecher, T.: A classification system for secondary design features for the use within sheet-bulk metal forming, ICED13, Seoul

          2012

          • 26.02.2012: Schmaltz, S.: Material parameter optimization utilizing full-field strain measurement data and the Finite Element Method, Colloquium on metal forming, Donnersbach, Austria
          • 15.03.2012: Opel, S.: Manufacturing of sheet metal components with variants using process adapted semi-finished products, Erlangen
          • 27.03.2012: Lehmann, E.; Löhnert, S.; Wriggers, P.: About the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation at Finite Deformation, GAMM 83rd Annual Meeting, Darmstadt
          • 04.06.2012: Krebs, E.; Kersting, P.; Biermann, D.: Using NC-path deformation for compensating tool deflections in micromilling of hardened steel, Zürich (Schweiz)
          • 05.06.2012: Faßmann, D.: In situ EBSD-Messungen bei Zugversuchen im Rasterelektronenmikroskop, DGM / DVM- Arbeitskreistreffen Mikrostruktur-charakterisierung im REM; Hannover
          • 10.07.2012: Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards an Effective Material Model for Elastoplastic Polycrystalline Materials through Homogenisation, 8th European Solid Mechanics Conference, Graz

          2011

          • 18.04.2011: Salfeld, V.: Characterization of Horizontal Loads in the Production of Asymmetrical Parts, Leuven
          • 27.04.2011: Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards the Effective Behaviour of Polycrystalline Materials for Sheet Bulk Metal Forming Processes, ESAFORM 2011, Belfast, Vereinigtes Königreich
          • 28.04.2011: Hauer, F.; Vierzigmann, U.; Willner, K.; Engel, U.: Numerical simulation of friction in metal forming using a halfspace model, ESAFORM 2011, Belfast, UK
          • 28.05.2011: Schmaltz, S.: Identification of the yield surface for sheet steel using an optical measurement system, YSESM, Chemnitz, Germany
          • 15.07.2011: Faßmann, D.: Untersuchung der duktilen Schädigungs-entwicklung in ferritischem Stahl , ZFM - Zentrum für Festkörperchemie und Neue Materialien
          • 31.08.2011: Lehmann, E.; Löhnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation, 2nd International Conference on Material Modelling, Paris, Frankreich
          • 08.09.2011: Lehmann, E.; Löhnert, S.; Wriggers, P.: Towards the Effective Behaviour of Polycrystalline Microstructures at Finite Strains, COMPLAS XI., Barcelona, Spanien
          • 13.10.2011: Plettke, R.: Integrierte Fertigung von tiefgezogenen Blechbauteilen mit Verzahnungselementen unter Einsatz von prozessangepassten Halbzeugen, 1. Workshop Blechmassivumformung, Erlangen, Germany

          2010

          • 23.03.2010: Lehmann, E.; Löhnert, S.; Wriggers, P.: Modelling Metals at Finite Deformation, GAMM 81st Annual Meeting, Karlsruhe
          • 09.04.2010: Schneider, T.: Manufacturing of Complex Functional Components with Variants by Using a New Metal Forming Process – Sheet-Bulk Metal Forming, ESAFORM 2010, Brescia
          • 15.04.2010: Birr, C.: Surface zone modification by atmospheric plasma-nitriding (APN) with the aid of the transmitted plasma arc, the coatings 2010; Erlangen
          • 15.06.2010: Vierzigmann, U.: TAILORED SURFACES IN SHEET-BULK METAL FORMING, Nice, France
          • 25.10.2010: Opel, S.: Investigation of Tailored Blank Production by the Process Class Sheet-Bulk Metal Forming, Paris