TR73

  • Increase font size
  • Default font size
  • Decrease font size


Publications



    2017

    • Gerstein, G.; Besserer, H.; N√ľrnberger, F.; Barrales-Mora, L. A.; Shvindlerman, L. S.; Estrin, Y.; Maier, H.: Formation and growth of voids in dual-phase steel at microscale and nanoscale levels. In: Journal of Materials Science, 52(2017)8, pp. 4234-4243
    • Landkammer, P.; S√∂hngen, B.; Steinmann, P.; Willner, K.: On gradient-based optimization strategies for inverse problems in metal forming. In: Menzel, A. (Edt.): GAMM-Mitteilungen - Themenheft: Computational Manufacturing, 40(2017), pp. 27-56
    • Tillmann, W.; Stangier, D.; Lopes-Dias, N.-F.; Biermann, D.; Krebs, E.: Adjustment of Friction by Duplex-Treated, Bionic Structures for Sheet-Bulk Metal Forming. In: Tribology International, 111(2017), pp. 9–17
    • Gerstein, G.; Clausmeyer, T.; Gutknecht, F.; Tekkaya, A.; N√ľrnberger, F.: Analysis of dislocation structures in ferritic and dual phase steels regarding continuous and discontinuous loading paths. In: 146th Annual Meeting & Exhibition Supplemental Proceedings (Edt.): The Minerals, Metals & Materials Society TMS 2017, 146(2017), Cham, Switzerland: Springer, pp. 203-210
    • Wartzack, S.; Sauer, C.; K√ľstner, C.: What does Design for Production mean? – From Design Guidelines to Self-learning Engineering Workbenches. In: Meyer, A.; Schirmeyer, R.; Vajna, S. (Edt.): Proceedings of the 11th International Workshop on Integrated Design Engineering, (2017), Magdeburg: Universität Magdeburg Lehrstuhl für Maschinenbauinformatik, pp. 93-102
    • Tillmann, W.; Stangier, D.; Nelson-Filipe Lopes Dias: Influence of PVD-Duplex-Treated, Bionic Surface Structures on the Wetting Behavior for Sheet-Bulk Metal Forming Tools. In: Journal of Bionic Engineering, 14(2017), pp. 520-531
    • Gr√∂ne, M.; Krimm, R.; Behrens, B.: Electromagnetic System to Control the Accuracy of Ram Travel at the Presence of Horizontal Process Forces. In: Advanced Materials Research, (2017), accepted
    • Tillmann, W.; Stangier, D.; Hagen, L.; Schr√∂der, P.; Krabiell, M.: Influence of the WC grain size on the properties of PVD(HVOF duplex coatings. In: Surface & Coatings Technology, 328(2017), pp. 326-334
    • Merklein, M.; Andreas, K.; Kraus, M.; L√∂ffler, M.; Pilz, F.: Development and launching of an application-oriented test rig for wear investigations in sheet-bulk metal forming. In: THE"A" Coatings, (2017), accepted
    • L√∂ffler, M.; Andreas, K.; Engel, U.; Merklein, M.: Identification of tribological mechanisms of shot peened steel surfaces for an application in sheet-bulk metal forming.. In: Martin Levesque (Edt.): Proceedings of the 13th International Conference on Shot Peening, (2017), pp. 67-72
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Improvement strategies for the formfilling in incremental gear forming processes. In: Production Engineering, (2017), pp. 1-9
    • Schulte, R.; Hildenbrand, P.; Vogel, M.; Lechner, M.; Merklein, M.: Analysis of fundamental dependencies between manufacturing and processing Tailored Blanks in sheet-bulk metal forming processes. In: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom, (2017), published
    • Vogel, M.; Lechner, M.; Hildenbrand, P.; Schulte, R.; Merklein, M.: Manufacturing of tailored blanks by flexible rolling and its application in a sheet-bulk metal forming process. In: Steels in Cars and Trucks (Edt.): (2017), published
    • Schulte, R.; Lechner, M.; Vogel, M.; Hildenbrand, P.; Merklein, M.: Umformtechnische Herstellung von Funktionsbauteilen aus Tailored Blanks durch Blechmassivumformverfahren. In: 22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik. 15./16.03.2017, (2017), published
    • Sauer, C.; K√ľstner, C.; Schleich, B.; Wartzack, S.: Einsatz von Deep Learning zur ortsaufgelösten Beschreibung von Bauteileigenschaften. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X - Beiträge zum 28. DFX-Symposium 2017, (2017), Hamburg: TuTech, pp. 49-60
    • Landkammer, P.; Caspari, M.; Steinmann, P.: Improvements on a non-invasive, parameter-free approach to inverse form finding. In: Computational Mechanics, (2017), pp. 1-15

    2016

    • Loderer, A.; Hausotte, T.: Qualification concept for optical multi-scale multi-sensor systems. In: Journal of Sensors and Sensor Systems JSSS, 5(2016)1, pp. 1-8
    • Beese, S.; Beyer, F.; Blum, H.; Isik, K.; Kumor, D.; Rademacher, A.; Tekkaya, A.; Willner, K.; Wriggers, P.; Zeller, S.; L√∂hnert, S.: Simulation of Sheet-Bulk Metal Forming Processes with Simufact.forming using User-Subroutines. In: ESAFORM (Edt.): (2016), Nantes, Frankreich, accepted
    • Merklein, M.; Lechner, M.; Gr√∂bel, D.; L√∂ffler, M.; Schneider, T.; Schulte, R.; Hildenbrand, P.: Innovative approaches for controlling the material flow in sheet-bulk metal forming processes. In: Manufacturing Review, 3(2016)2, pp. 1-17
    • Landkammer, P.; Steinmann, P.: A non-invasive heuristic approach to shape optimization in forming. In: Computational Mechanics, 57(2016)2, pp. 169-191
    • Rademacher, A.: NCP-function based dual weighted residual error estimators for Signorini's problem. In: SIAM Journal on Scientific Computing, 38(2016)3, pp. A1743-1769
    • Gerstein, G.; N√ľrnberger, F.; Maier, H.: Evolution of void shape anisotropy in deformed bcc steels. In: TMS (Edt.): TMS 145. Annual Meeting, Proceedings of the EPD Congress, (2016), Hoboken, New Jersey: John Wiley & Sons, Inc., pp. 173-179
    • Isik, K.; Gerstein, G.; , .; Clausmeyer, T.; N√ľrnberger, F.; Maier, H.; Tekkaya, A.: Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching. In: Procedia Structural Integrity, 2(2016), pp. 673-680
    • Denkena, B.; Grove, T.; Lucas, H.: Influences of Grinding with Toric CBN Grinding Tools on Surface and Subsurface of 1.3344 PM Steel. In: Journal of Materials Processing Technology, 229(2016), pp. 541-548
    • Beyer, F.; Willner, K.: A constitutive friction law for sheet-bulk metal forming. In: Tribology Online (Edt.): 11(2016)5, pp. 614-622
    • Landkammer, P.; Schneider, T.; Schulte, R.; Steinmann, P.; Merklein, M.: A non-invasive form finding method with application to metal forming. In: Production Engineering (Special Issue), 10(2016)1, pp. 93-102
    • Hildenbrand, P.; Lechner, M.; Merklein, M.: A new strategy for manufacturing tailored blanks by a flexible rolling process. In: Materials Science Forum, 854(2016), pp. 99-105
    • L√∂ffler, M.; Andreas, K.; Engel, U.; Weikert, T.; Tremmel, S.; Wartzack, S.; Stangier, D.; Tillmann, W.; Merklein, M.: Surface modifications for adaption of tribological conditions in sheet-bulk metal forming processes. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Edt.): Proceedings THE "A" Coatings, (2016), PZH Verlag, pp. 13-20
    • Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.: Influence of PVD-coating manufacturing steps on the subsurface integrity of hardened and soft AISI M3:2 high speed steel. In: Bobzin, K.; Bouzakis, K.-D.; Denkena, B.; Maier, H.J.; Merklein, M. (Edt.): Proceedings THE "A" Coatings, (2016), PZH Verlag, pp. 23-30
    • Tillmann, W.; Stangier, D.; Denkena, B.; Grove, T.; Lucas, H.: Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools. In: Special Issue: Production Engineering, 10(2016)1, Springer, pp. 17-24
    • Matthias, S.; Loderer, A.; Koch, S.; Gr√∂ne, M.; K√§stner, M.; H√ľbner, S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B.: Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process. In: Production Engineering, 10(2016)1, DOI 10.1007/s11740-015-0647-2, pp. 51-61
    • Gerstein, G.; Bruchanov, A. A.; Dyachok, D. V.; N√ľrnberger, F.: The effect of texture in modeling deformation processes of bcc steel sheets. In: Materials Letters, 164(2016), pp. 356-359
    • Kersting, P.; Gr√∂bel, D.; Merklein, M.; Sieczkarek, P.; Wernicke, S.; Tekkaya, A.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Tremmel, S.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; L√∂ffler, M.; Beyer, F.; Willner, K.: Experimental and numcerial analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming. In: Production Engineering, 10(2016)1, Springer, pp. 37-50
    • Besserer, H.; Dalinger, A.; Rodman, D.; N√ľrnberger, F.; Hildenbrand, P.; Merklein, M.; Maier, H.: Induction heat treatment of sheet-bulk metal formed parts assisted by water-air spray cooling. In: Steel Research International, 87(2016)9, pp. 1220-1227
    • Besserer, H.; Hildenbrand, P.; Gerstein, G.; N√ľrnberger, F.; Merklein, M.; Maier, H.: Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes. In: Journal of Materials Engineering and Performance, 25(2016)3, pp. 1136-1142
    • Besserer, H.; Gerstein, G.; Dalinger, A.; Jablonik, L.; Rodman, D.; N√ľrnberger, F.: Ion Beam Processing in the Sample Preparation for the Analysis of Ductile Damage in Deep Drawing Steels. In: Praktische Metallographie, 53(2016)4, pp. 221-236
    • Besserer, H.; Gerstein, G.; Maier, H.; N√ľrnberger, F.: Specimen Preparation by Ion Beam Slope Cutting for Characterization of Ductile Damage by Scanning Electron Microscopy. In: Microscopy Research and Technique, 79(2016)4, pp. 321-327
    • Weikert, T.; Tremmel, S.: Influence of bias voltage and layer thickness variation on mechanical properties and tribological behavior of a-C:H:W multilayer coatings. In: Proceedings of the 17th Nordic Symposium on Tribology - NordTrib 2016, (2016), published on CD
    • Gr√∂bel, D.; Schulte, R.; Hildenbrand, P.; Lechner, M.; Engel, U.; Sieczkarek, P.; Wernicke, S.; , .; Tekkaya, A.; Behrens, B.; H√ľbner, S.; Vucetic, M.; Koch, S.; Merklein, M.: Manufacturing of functional elements by sheet-bulk metal forming processes. In: Production Engineering, 10(2016)1, pp. 63-80
    • Beese, S.; L√∂hnert, S.; Wriggers, P.: Modeling of Fracture in Polycrystalline Materials. In: Formaggia, Luca, Pedregal, Pablo (Edt.): SEMA SIMAI special issue on extended discretisation methods, (2016), Berlin, New York, Heidelberg: Springer, accepted
    • Isik, K.; Gerstein, G.; Schneider, T.; Schulte, R.; , .; Clausmeyer, T.; N√ľrnberger, F.; Vucetic, M.; Koch, S.; H√ľbner, S.; Behrens, B.; Tekkaya, A.; Merklein, M.: Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming. In: Production Engineering, 10(2016)1, pp. 5-15
    • L√∂ffler, M.; Andreas, K.: Einfluss des Schmierstoffs auf die Werkstückqualität in der Blechmassivumformung. In: Buchmayr, B. (Edt.): Tagungsband XXXV. Verformungskundliches Kolloquium, (2016), accepted
    • Behrens, B.; Bouguecha, A.; Vucetic, M.; Chugreev, A.; , .: Advanced Finite Element Analysis of Die Wear in Sheet-Bulk Metal Forming Processes. In: ESAFORM (Edt.): (2016), Nante, Frankreich, accepted
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Martins, P. A. F.; Tekkaya, A.: Incipient and repeatable plastic flow in incremental sheet-bulk forming of gears. In: International Journal of Advanced Manufacturing Technology, (2016)86, DOI 10.1007/s00170-016-8442-6, pp. 3091-3100
    • Merklein, M.; Hagenah, H.: Introduction to sheet-bulk metal forming. In: Production Engineering, 10(2016)1, pp. 1-3
    • L√∂ffler, M.; Andreas, K.; Engel, U.; Merklein, M.: Applicability of blasted blanks for adaption of tribological conditions in sheet-bulk metal forming. In: Procedia CIRP, 45(2016), pp. 239-242
    • Andreas, K.; Henneberg, J.; Koch, J.; Merklein, M.: Local adjustment of surface integrity of forming tools by adaptation of tool making process. In: Procedia CIRP, 45(2016), pp. 339-342
    • Bryukhanov, A. A.; Gerstein, G.; Dyachok, D. A.; N√ľrnberger, F.: Effect of deformation texture on the anisotropy of elasticity and damage of two-phase steel sheets. In: The Physics of Metals and Metallography, 117(2016)7, pp. 719-724
    • L√∂hnert, S.; Beese, S.: A regularization technique for the XFEM: extension to finite deformations, inelastic material behaviour and multifield problems. In: Proceedings in Applied Mathematics and Mechanics, (2016), Wiley, submitted
    • Isik, K.; Wernicke, S.; Silva, M.B.; Martins, P.A.F.; Tekkaya, A.: Failure by fracture in sheet–bulk metal forming. In: Journal of Strain Analysis; DOI: 10.1177/0309324716639773, 51(2016)5, pp. 387-394
    • Isik, K.; Gerstein, G.; Clausmeyer, T.; N√ľrnberger, F.; Tekkaya, A.; Maier, H.: Evaluation of Void Nucleation and Development during Plastic Deformation of Dual-Phase Steel DP600. In: Steel Research Int., DOI: 10.1002/srin.201500483, (2016), published
    • Gerstein, G.; Clausmeyer, T.; Isik, K.; N√ľrnberger, F.; Tekkaya, A.; Bruchanov, A. A.; Maier, H.: Experimental analysis of anisotropic damage in dual phase steel by resonance measurement. In: International Journal of Damage Mechanics, (2016), published
    • K√ľstner, C.; Beyer, F.; Kumor, D.; Loderer, A.; Wartzack, S.; Willner, K.; Blum, H.; Rademacher, A.; Hausotte, T.: Simulation-based development of Pareto-optimized tailored blanks for the use within sheet-bulk metal forming. In: Marjanovic, D.; Storga, M.; Pavkovic, N.; Bojcetic, N.; Skec, S. (Edt.): DS 84: Proceedings of the DESIGN 2016 14th International Design Conference, (2016), Design Society, pp. 291-300
    • Besserer, H.; Boiarkin, V.; , .; N√ľrnberger, F.: Qualifying Electrically Conductive Cold Embedding-Media for Scanning Electron Microscopy. In: Metallography, Microstructure and Analysis, 5(2016)4, pp. 332-341
    • M.B. Silva; Isik, K.; Tekkaya, A.; A.G. Atkins; P.A.F. Martins: Fracture toughness and failure limits in sheet metal forming. In: Journal of Materials Processing Technology, 234(2016), pp. 249-258
    • Sieczkarek, P.; Wernicke, S.; Weddeling, C.; Martins, P. A. F.; Tekkaya, A.: Local Forming of Gears by Indentation of Sheets. In: Journal of Engineering Manufacture, (2016), DOI: 10.1177/0954405416654190, accepted
    • Matthias, S.; K√§stner, M.; Reithmeier, E.: Comparison of LASER and LED illumination for fiber-optic fringe projection. In: Proc. SPIE 9899, (2016), pp. 989905
    • Sieczkarek, P.; Silva, C. M. A.; Wernicke, S.; Tekkaya, A.; Martins, P. A. F.: Mechanical Characterization of Materials for Sheet-Bulk Metal Forming. In: RTME Conference, July 11-13, (2016), Aveiro, Portugal, in print
    • Tillmann, W.; Stangier, D.; Laemmerhirt, I.-A.; Biermann, D.; Freiburg, D.: Investigation of the tribological properties of high-feed milled structures and Cr-based hard PVD-coatings. In: Vacuum, 131(2016), pp. 5-13
    • Gr√∂ne, M.; Rosenbusch, D.; Krimm, R.; Behrens, B.: Electromagnetic System to Improve the Manufacturing Accuracy at the Presence of Horizontal Process Forces. In: Advanced Materials Research, 1140(2016), pp. 369-376
    • Landkammer, P.; Steinmann, P.: Case study on the influence of kinematic hardening to a parameter-free and non-invasive form finding approach. In: K. Saanouni (Edt.): MATEC Web of Conferences - Proceedings of the 12th Int Numiform Conference , 80(2016)11, pp. 1-6
    • Beyer, F.; L√∂ffler, M.; Willner, K.; Engel, U.; Merklein, M.: Enhancement of a Constitutive Friction Law by Considering Plastic Smoothing of Rough Surfaces in Dependency on the Bulk Stresses. In: Tribology in Industry, 38(2016)2, pp. 163-175
    • Behrens, B.; Krimm, R.; Gr√∂ne, M.: Reduktion des Maschineneinflusses auf die Bauteilqualität bei Horizontalbelastungen. In: Europäische Forschungsgesellschaft für Blechverarbeitung (Edt.): Tagungsband, (2016)42, pp. 183-193
    • Tillmann, W.; Stangier, D.; Schr√∂der, P.: Investigation and Optimization of the tribo-mechanical Properties of CrAlCN Coatings using Design of Experiments. In: Surface and Coatings Technology, (2016), accepted
    • L√∂ffler, M.; , .; Engel, U.; Schulte, R.; Gr√∂bel, D.; Krebs, E.; Freiburg, D.; Biermann, D.; Stangier, D.; Tillmann, W.; Weikert, T.; Wartzack, S.; Tremmel, S.; Lucas, H.; Denkena, B.; Merklein, M.: Tribological measures for controlling material flow in sheet-bulk metal forming. In: Production Engineering, (2016), accepted
    • Weikert, T.; Tremmel, S.; Wartzack, S.: Gezielte Anpassung lokaler Reibungszustände unter Einsatz wolframmodifizierter amorpher Kohlenstoffschichten. In: Bartz, Wilfried J. (Edt.): Tribologie und Schmierungstechnik, 63(2016)5, Renningen: Expert Verlag GmbH, pp. 5-11
    • Matthias, S.; K√§stner, M.; Reithmeier, E.: In-situ fringe projection using coherent image fibers. In: DGaO Proceedings 2016, (2016), published
    • P√∂sch, A.; Schlobohm, J.; Matthias, S.; Reithmeier, E.: Rigid and flexible endoscopes for three dimensional measurement of inside machine parts using fringe projection. In: Optics and Lasers in Engineering, (2016), published
    • Sieczkarek, P.; Wernicke, S.; Gies, S.; Tekkaya, A.; Krebs, E.; Wiederkehr, P.; Biermann, D.; Tillmann, W.; Stangier, D.: Wear Behavior of Tribologically Optimized Tool Surfaces for Incremental Forming Processes. In: Tribology International, 104(2016), pp. 64 - 72
    • K√ľstner, C.; Mitsch, J.; Hegwein, M.; Meintker, N.; M√∂nks, K.; Fr√∂hlich, M.; Wartzack, S.: Zustandsdiagnose von Maschinen im Kontext von Industrie 4.0 unter Einsatz von Data-Mining Methoden. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X - Beiträge zum 27. DFX-Symposium 2016, (2016), Hamburg: TuTech, pp. 169-180
    • Loderer, A.; Hausotte, T.: Ganzheitliche dimensionelle Messung von blechmassivumgeformten Bauteilen. In: Stefan Zimmermann (Edt.): XXX. Messtechnisches Symosium 2016, (2016), Berlin: DE Gruyter, pp. 133-140
    • Wernicke, S.; Sieczkarek, P.; Martins, P. A. F.; Tekkaya, A.: Local Sheet Thickening by In-Plane Swaging. In: International Journal of Mechanical Sciences, (2016), DOI: 10.1016/j.ijmecsci.2016.10.003, accepted
    • Berthelsen, R.; Wilbuer, H.; Holtermann, R.; Menzel, A.: Computational modelling of wear - application to structured surfaces of elastoplastic tools. In: GAMM-Mitteilungen, 39(2016)2, pp. 210-228

    2015

    • Koch, S.; Vucetic, M.; H√ľbner, S.; Behrens, B.: Superimposed oscillating and non-oscillating ring compression tests for sheet-bulk metal forming technology. In: Advanced Materials Research, 794(2015), Trans Tech Publications, Switzerland, pp. 89-96
    • Zhao, R.; Weikert, T.; Tremmel, S.; Wartzack, S.: Tribological behaviour of tungsten doped hydrogenated amorphous carbon coatings deposited under various bias voltages and argon flows. In: Book of Abstracts of the 11th Coatings Science International 2015, (2015), pp. 140-144
    • Merklein, M.; L√∂ffler, M.; Schneider, T.: Plastic flow and its control in sheet-bulk metal forming of thin-walled functional components. In: CIRP Annals - Manufacturing Technology, 64(2015)1, pp. 248-248
    • Freiburg, D.; Biermann, D.; Hense, R.; Tillmann, W.; Stangier, D.: Influence of Surface Modifications on Friction, Using High-Feed Milling and Wear Resistant PVD-Coating for Sheet-Metal Forming Tools. In: Key Engineering Materials, 639(2015), pp. 275-282
    • Hense, R.; Kersting, P.; Vierzigmann, U.; L√∂ffler, M.; Biermann, D.; Merklein, M.; Wels, C.: High-Feed Milling of Tailored Surfaces for Sheet-Bulk Metal Forming Tools. In: Production Engineering, 9(2015)2, pp. 215-223
    • Gerstein, G.; Besserer, H.; N√ľrnberger, F.; Maier, H.: Comparison of the Mechanisms of Void Formation by Plastic Deformation in Single- and Dual-Phase BCC- Steels. In: 2015 TMS Annual Meeting & Exhibition, Proceedings Characterization of Minerals, Metals and Materials, (2015), Hoboken, New Jersey: Wiley, pp. 75-81
    • Kersting, P.; Krebs, E.; Odendahl, S.; Simone Carmignato; Filippo Zanini; Tobias Siebrecht: Analysing machining errors resulting from a micromilling process using CT measurement and process simulation. In: 4M/ICOMM15 Annoni, A.; Fassi, I.; Wiens, G.J; Dimov, S. (Hrsg.) (Edt.): Proceedings of the 4M/ICOMM2015 Conference, (2015), pp. 137-140
    • Schneider, T.; Merklein, M.: Sheet-bulk metal forming - potential and challenges of a new class of forming processes. In: Khan, A.; Yu, H.Y. (Edt.): Proceedings of PLASTICITY ’15: The Twenty First International Symposium on Plasticity and its Current Applications, (2015), pp. 169-171
    • Rademacher, A.; Schr√∂der, A.: Dual weighted residual error control for frictional contact problems. In: Computational Methods in Applied Mathematics, 15(2015)3, pp. 391-414
    • Landkammer, P.; Steinmann, P.: Application of a non-invasive form-finding algorithm to the ring compression test with varying friction coefficients. In: Key Engineering Materials, 651(2015), pp. 1381-1386
    • Behrens, B.; H√ľbner, S.; Vucetic, M.; Koch, S.; Denkena, B.; Grove, T.; Lucas, H.; Tillmann, W.; Stangier, D.; Hausotte, T.; Loderer, A.: Prozessauslegung und Untersuchung von geschliffenen und CrAlN / CrAlCN-beschichteten Werkzeugoberflächen mittels schwingungsüberlagertem Flachstauchversuch für die Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 173 - 192
    • Beyer, F.; Blum, H.; Kumor, D.; Rademacher, A.; Willner, K.; Schneider, T.: Experimental and simulative investigations of tribology in sheet-bulk metal forming. In: Key Engineering Materials, 639(2015), pp. 283-290
    • L√∂ffler, M.; Schneider, T.; Vierzigmann, U.; Engel, U.; Merklein, M.: Locally Adapted Tribological Conditions as a Method for Influencing the Material Flow in Sheet-Bulk Metal Forming Processes. In: Key Engineering Materials, 639(2015), pp. 267-274
    • Schmaltz, S.: Inverse Materialparameteridentifikation von Blechwerkstoffen für ein anisotropes elasto-plastisches Materialmodell bei finiten Deformationen . In: P. Steinmann, K. Willner (Edt.): Dissertation, Schriftenreihe Technische Mechanik, 14(2015), Erlangen: FAU Erlangen-Nürnberg, pp. 1-171
    • Hildenbrand, P.; Schneider, T.; Merklein, M.: Flexible Rolling of Process Adapted Semi-finished Parts and its Application in a Sheet-Bulk Metal Forming Process.. In: Key Engineering Materials, 639(2015), pp. 259-266
    • L√∂ffler, M.; Freiburg, D.; Gr√∂bel, D.; Loderer, A.; Matthias, S.; Stangier, D.; Weikert, T.: Untersuchung von Tailored Surfaces hinsichtlich ihres tribologischen Einflusses auf Prozesse der Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 131-146
    • Gr√∂bel, D.; Hildenbrand, P.; Engel, U.; Merklein, M.: Influence of tailored blanks on forming of cold forged functional elements in a sheet bulk metal forming process. In: Metec, Stahl-Institut VDEh (Edt.): Proceedings METEC & 2nd ESTAT, (2015), published on CD
    • Landkammer, P.; S√∂hngen, B.; Loderer, A.; Krebs, E.; Steinmann, P.; Willner, K.; Hausotte, T.; Kersting, P.; Biermann, D.: Experimentelle Verifizierung eines Benchmark-Umformprozesses. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 91-110
    • Hildenbrand, P.; Sieczkarek, P.; Matthias, S.; L√∂ffler, M.; Besserer, H.; Merklein, M.; Tekkaya, A.; Reithmeier, E.; Maier, H.: Inkrementelles Umformen dünnwandiger Funktionsbauteile unter Einsatz prozessangepasster Halbzeuge durch Verfahren der Blechmassivumformung. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 149-170
    • Breitsprecher, T.; Sauer, C.; Sperber, C.; Wartzack, S.: Design-for-manufacture of sheet-bulk metal formed parts. In: Weber, C.; et al. (Edt.): DS80-4 Proceedings of the 20th International Conference on Engineering Design (ICED15), (2015), Mailand: Design Society, pp. 183-192
    • Zeller, S.; Beese, S.; Gerstein, G.; Isik, K.; L√∂hnert, S.; N√ľrnberger, F.; Wriggers, P.; Maier, H.; Tekkaya, A.: Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 Bauteilen. In: Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 113-128
    • Matthias, S.; Ohrt, C.; P√∂sch, A.; K√§stner, M.; Reithmeier, E.: Single image geometry inspection using inverse endoscopic fringe projection. In: ACTA IMEKO, 4(2015)2, pp. 4-9
    • Behrens, B.; Bouguecha, A.; Vucetic, M.; H√ľbner, S.; , .; Koch, S.: Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. In: Key Engineering Materials, 651(2015), Trans Tech Publications, Switzerland, pp. 1153-1158
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying Measuring Systems by using Six Sigma. In: Key Engineering Materials, 637(2015), pp. 37-43
    • Loderer, A.; Timmermann, M.; Matthias, S.; K√§stner, M.; Schneider, T.; Hausotte, T.; Reithmeier, E.: Measuring systems for sheet-bulk metal forming. In: Key Engineering Materials, 639(2015), pp. 291-298
    • Landkammer, P.; Loderer, A.; Krebs, E.; S√∂hngen, B.; Steinmann, P.; Hausotte, T.; Kersting, P.; Biermann, D.; Willner, K.: Experimental verification of a benchmark forming simulation. In: Key Engineering Materials, 639(2015), pp. 251-258
    • Loderer, A.; Timmermann, M.; Hausotte, T.: Methodical approach for selecting an appropriate sensor of a multi-sensor fringe projection system.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
    • Timmermann, M.; Weinert, B.; Schuler, A.; Loderer, A.; Hausotte, T.: Fibre-optical 3-D measurement of highly curved free-form surfaces.. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, (2015), Charlotte, North Carolina, USA, published
    • Rademacher, A.: Balancing discretization and numerical error for coupled parabolic hyperbolic problems using the dual weigthed residual method with application to thermoelasticity. In: Ergebnisberichte Angewandte Mathematik (Edt.): Fakultät für Mathematik, TU Dortmund, (2015)516, published
    • L√∂ffler, M.; Gr√∂bel, D.; Andreas, K.; Engel, U.; Merklein, M.: Analysis of Effectivness of Locally Adapted Tribological Conditions for Improving Product Quality in Sheet-Bulk Metal Forming. In: Applied Mechnics and Materials, 794(2015), pp. 81-88
    • Rademacher, A.: Mesh and model adaptivity for frictional contact problems. In: Ergebnisberichte Angewandte Mathematik (Edt.): Fakultät für Mathematik, TU Dortmund, (2015)515, published
    • Landkammer, P.; Steinmann, P.: A global damping factor for a non-invasive form finding algorithm. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): Proc. Appl. Math. Mech., 15(2015)1, Wiley, pp. 327-328
    • Matthias, S.; K√§stner, M.; Reithmeier, E.: Evaluation of system models for an endoscopic fringe projection system. In: MEASUREMENT, 73(2015), Elsevier, pp. 239-246
    • Weikert, T.; Tremmel, S.; Wartzack, S.: Gezielte Anpassung lokaler Reibungszustände unter Einsatz wolframmodifizierter amorpher Kohlenstoffschichten (a-C:H:W). In: Gesellschaft für Tribologie e.V. (Edt.): 56. Tribologie-Fachtagung. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Band 1, (2015), Göttingen, pp. 24/1-24/10
    • Loderer, A.; Hartmann, W.; Hausotte, T.: Calibration Concept for Dimensional Measurements with Optical Multiscale Multi-Sensor Systems. In: AMA Service GmbH (Edt.): AMA Conferences 2015 - SENSOR 2015 and IRS² 2015, (2015), Wunstdorf: AMA Service GmbH, pp. 447-452
    • Stangier, D.; Tillmann, W.; Krebs, E.; Kersting, P.; Biermann, D.; Hagen, L.: Wear Behavior of Bio-inspired and Technologically Structured HVOF Sprayed NiCrBSiFe Coatings. In: Surface and Coatings Technology, 280(2015), pp. 16-26
    • Matthias, S.; K√§stner, M.; Reithmeier, E.: Endoscopic fringe projection for in-situ inspection of a sheet-bulk metal forming process. In: Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, (2015), pp. 952513
    • Freiburg, D.; Kersting, P.; Biermann, D.: Simulation and Structuring of Complex Surface Areas using High Feed Milling. In: 8th Iinternatinal Conference and Exhibition on Design and Production of Machines and Dies/Molds, 8(2015), Kusadasi, Aydin, TURKEY, pp. 93-98
    • Gerstein, G.; Besserer, H.; Jablonik, L.; Dalinger, A.; N√ľrnberger, F.; H√∂pner, A.: Präparation plastisch umgeformter Stahlproben durch Ionenstrahlbearbeitung für die Untersuchung von duktiler Schädigung. In: Schneider, G.; Zschech, E.; Petzow, G. (Edt.): Fortschritte in der Metallographie. Berichte der 49. Metallographie-Tagung Dresden, 16. bis 18. September 2015, 47(2015), Sankt Augustin: DGM Inventum, pp. 153-158
    • S√∂hngen, B.; Willner, K.: Inverse Parameter Identification for Orthotropic Elasto-Plastic Sheet-Steel. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): Special Issue: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 15(2015)1, Weinheim: WILEY-VCH Verlag GmbH & Co, pp. 361-362
    • Beyer, F.; Willner, K.: Determination of a Constitutive Friction Law Using an Elastic-Plastic Half-Space Model. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): Proc. Appl. Math. Mech., 15(2015)1, Wiley, pp. 173-174
    • Beyer, F.; Hauer, F.; Willner, K.: Development of a Constitutive Friction Law based on the Frictional Interaction of Rough Surfaces37(2015)4, pp. 400-412
    • Zillmann, B.; Wagner, M. F.-X.; Schmaltz, S.; Schmidl, E.; Lampke, T.; Willner, K.; Halle, T.: In-plane biaxial compression and tension testing of thin sheet materials. In: International Journal of Solids and Structures, 66(2015), pp. 111-120
    • Q. Yin; Soyarslan, C.; Isik, K.; Tekkaya, A.: A grooved in-plane torsion test for the investigation of shear fracture in sheet materials. In: International Journal of Solids and Structures, 66(2015), pp. 121-132
    • Isik, K.; Silva, M.B.; Atkins, A.G.; Tekkaya, A.; Martins. P.A.F.: A New test for determining fracture thoughness in plane stress in mode II . In: Journal of Strain Analysis for Engineering Design, 50(2015)4, pp. 221-231
    • Silva, M.B.; Isik, K.; Tekkaya, A.; Martins, P.A.F.: Fracture loci in sheet metal forming: A Review. In: Acta Metallurgica Sinica (English Letters), 28(2015)12, pp. 1415-1425
    • Lucas, H.; Denkena, B.; Grove, T.; Krebs, E.; Kersting, P.; Freiburg, D.; Biermann, D.: Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling. In: HTM Journal of Heat Treatment and Materials, 70(2015)4, pp. 183-189
    • Hildenbrand, P.; Schulte, R.; Merklein, M.: New process strategies to manufacture tailored blanks out of DP600 by orbital forming. In: Applied Mechanics and Materials, 794(2015), pp. 144-151
    • Breitsprecher, T.; Kestel, P.; K√ľstner, C.; Spr√ľgel, T.; Wartzack, S.: Einsatz von Data-Mining in modernen Produktentstehungsprozessen. In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110(2015)11, München: Carl Hanser, pp. 744-750
    • Merklein, M.; Gr√∂bel, D.; L√∂ffler, M.; Schneider, T.; Hildenbrand, P.: Sheet-bulk metal forming – forming of functional components from sheet metals. In: Y. Qin, T.A. Dean, J. Lin, S.J. Yuan, F. Vollertsen (Edt.): Proceedings of the 4th International Conference on New Forming Technology, (2015), MATEC Web of Conferences, pp. 01001 1-12
    • Tillmann, W.; Stangier, D.; Biermann, D.; Kersting, P.; Krebs, E.; Hagen, L.: Tribological investigation of bionic and micro-structured functional surfaces. In: Materialwissenschaft und Werkstofftechnik, 46(2015)11, pp. 1096-1104
    • Gr√∂ne, M.; Krimm, R.; Behrens, B.: Vermeidung von Stößelversatz mit Elektromagneten. In: wt Werkstattstechnik online, (2015)10, pp. 687-691
    • Freiburg, D.; Hense, R.; Biermann, D.; Kersting, P.: Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques. In: J. Manuf. Sci. Eng., 138(2015)4, pp. 6
    • Salfeld, V.: Experimentelle und numerische Untersuchungen zur Verlagerung des Pressenstößels infolge einer Horizontalkraft. In: Bernd-Arno Behrens (Edt.): Berichte aus dem IFUM, Dissertation, 6(2015), Garbsen: PZH Verlag, published
    • Rademacher, A.: Adaptive space-time finite element methods for dynamic linear thermoelasticity. In: Proceedings in Applied Mathematics and Mechanics (PAMM) (Edt.): Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), 15(2015), Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 681-682
    • Matthias, S.; K√§stner, M.; Reithmeier, E.; Sieczkarek, P.; Tekkaya, A.: Forming tool inspection using fiber-optic sensor heads. In: João Tavares, Natal Jorge (Edt.): Computational Vision and Medical Image Processing V, (2015), London, UK: Taylor & Francis Group, pp. 335-339
    • Gr√∂bel, D.; Schneider, T.; Merklein, M.: Sheet-Bulk Metal Forming. In: Tekkaya, A.E.; Homberg, W.; Brosius, A. (Edt.): 60 Excellent Inventions in Metal Forming, (2015), Springer, pp. 101-106
    • Zeller, S.; L√∂hnert, S.; Wriggers, P.: Modelling thermoplastic material behaviour of dual-phase steels on a microscopic length scale. In: Proc. Appl. Math. Mech., 15(2015)1, pp. 373 - 374
    • L√∂hnert, S.: Stabilizing the XFEM for static and dynamic crack simulations. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): PAMM - Proc. Appl. Math. Mech., 15(2015)1, WILEY-VCH Verlag, pp. 137-138
    • Beese, S.; L√∂hnert, S.; Wriggers, P.: 3D Ductile crack propagation with the XFEM. In: G. Zavarise, P. Cinnella and M. Campiti (Edt.): PAMM - Proc. Appl. Math. Mech., 15(2015)1, WILEY-VCH Verlag, pp. 747-748
    • Matthias, S.; Schlobohm, J.; K√§stner, M.; Reithmeier, E.: Gegenüberstellung zweier Messsysteme zur Geometrieerfassung mittels strukturierter Beleuchtung. In: VDI-Berichte, 2269(2015), pp. 81-88

    2014

    • Ashhab, M.S.; Breitsprecher, T.; Wartzack, S.: Neural network based modeling and optimization of deep drawing – extrusion combined process . In: Journal of Intelligent Manufacturing, 25(2014)1, Springer, pp. 77-84
    • Schneider, T.; Vierzigmann, U.; Merklein, M.: Analysis of Varying Properties of Semi-finished Products in Sheet-bulk Metal Forming of Functional Components. In: J. W. Yoon, T. B. Stoughton, B. Rolfe, J. H. Beynon, P. Hodgson (Edt.): NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, (2014), pp. 930-933
    • Schmid, C.; Hetzner, H.; Tremmel, S.; Hilpert, F.; Durst, K.: Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings. In: Advanced Materials Research, 996(2014), Dürnten (Schweiz): Trans Tech Publications Ltd, pp. 14-21
    • Landkammer, P.; Germain, S.; Steinmann, P.: On inverse form finding for orthotropic plasticity. In: Computer Assisted Methods in Engineering and Science, 20(2014)4, pp. 337-348
    • Landkammer, P.; Steinmann, P.: A fast approach to shape optimization by using the inverse FEM. In: Key Engineering Materials, 611(2014), pp. 1404-1412
    • Landkammer, P.; Germain, S.; Steinmann, P.: Optimum blank design by using the FEM based on inverse motion in orthotropic elasto-plasticity. In: P. Steinmann, G. Leugering (Edt.): Proc. Appl. Math. Mech., 14(2014), Wiley, pp. 353-354
    • Schmaltz, S.; Willner, K.: Comparison of Different Biaxial Tests for the Inverse Identification of Sheet Steel Material Parameters. In: Strain, 50(2014)5, pp. 389-403
    • Merklein, M.; Schneider, T.; Gr√∂bel, D.; N√ľrnberger, F.: Blechmassivumformung – vom Halbzeug zum Funktionsbauteil. In: Behrens, B. A. (Edt.): 21. Umformtechnisches Kolloquium Hannover, Industrie und Wissenschaft – Gemeinsam die Zukunft gestalten, (2014), pp. 265-280
    • Breitsprecher, T.; Kestel, P.; Dingfelder, C.; Wartzack, S.: Gaussian process based approach for automatic knowledge acquisition. In: Marjanovic, D. (Edt.): DS 77: Proceedings of the DESIGN 2014 13th International Design Conference, (2014), Dubrovnik: Design Society, pp. 1733-1740
    • Gr√∂ne, M.; Krimm, R.; Salfeld, V.: Design of an Electromagnetic System to Avoid Horizontal Ram Displacement. In: Advanced Materials Research, 1018(2014), pp. 237-244
    • Sieczkarek, P.; Isik, K.; Martins, P. A. F.; Tekkaya, A.: Mechanics of Sheet-Bulk Indentation. In: Journal of Materials Processing Technology (JMPT), 214(2014), Elsevier, pp. 2387-2394
    • Germain, S.; Landkammer, P.; Steinmann, P.: A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems in isotropic elastoplasticity. In: P. Steinmann, G. Leugering (Edt.): Proc. Appl. Math. Mech., 14(2014), Wiley, pp. 423-424
    • Beyer, F.; Willner, K.: Surface Deformation due to Shear and Ploughing in a Halfspace. In: P. Steinmann & G. Leugering (Edt.): Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 14(2014)1, Weinheim: WILEY-VCH, pp. 239–240
    • Gr√∂ne, M.; Krimm, R.; Behrens, B.: Neuartiges System zur Vermeidung von Stößelversatz. In: wt Werkstattstechnik online, 104(2014)10, pp. 673-678
    • Isik, K.; Silva, M.B.; Tekkaya, A.; Martins P.A.F.: Formability limits by fracture in sheet metal forming. In: Journal of Materials Processing Technology, 214(2014), pp. 1557-1565
    • Breitsprecher, T.; Meinel, A.; Thummet, M.; Wartzack, S.: Produkt- und Prozessdatenmodellierung im Kontext der Blechmassivumformung. In: Stelzer, R. (Edt.): Entwerfen Entwickeln Erleben 2014 (EEE2014). Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik, (2014), Dresden: TUDpress Verlag der Wissenschaften, pp. 551-564
    • Breitsprecher, T.; Wartzack, S.: Der Einsatz von Gaußprozessen zur Beschleunigung der automatischen Wissensakquisition. In: Krause, D.; Paetzold, K.; Wartzack, S. (Edt.): Design for X - Beiträge zum 25. DFX-Symposium 2014, (2014), Hamburg: TuTech Verlag, pp. 227-236
    • Breitsprecher, T.; Dingfelder, C.; Wartzack, S.: Ein Ansatz zur adaptiven Simulationsdatenerhebung. In: Brökel, K.; Feldhusen, J.; Grote, K.-H.; Rieg, F.; Stelzer, R. (Edt.): 12. Gemeinsames Kolloquium Konstruktionstechnik, (2014), Bayreuth, pp. 461-470
    • Behrens, B.; H√ľbner, S.; Bouguecha, A.; Gribic, N; Vucetic, M.: Comparison of determination of biaxial true stress – true strain curves by the use of plane strain compression test and bulge test. In: AIP Publishing, 1567(2014)1, AIP Conference Proceedings , pp. 650-653
    • Schmaltz, S.; Willner, K.: Identification of material behavior via a Finite Element Model Updating strategy. In: P. Steinmann, G. Leugering (Edt.): Proc. Appl. Math. Mech., 14(2014)1, Wiley, pp. 439-440
    • Krebs, E.; Kersting, P.: Improving the cutting conditions in the five-axis micromilling of hardened high-speed steel by applying a suitable tool inclination. In: Procedia CIRP, 14(2014), pp. 366-370
    • Fa√ümann, D.: Beitrag zur wechselseitigen Beeinflussung von Mikrostruktur und Blechmassivumformprozess. Dissertation, Berichte aus dem IW, 1(2014), Hannover: PZH-Verlag, published
    • Biermann, D.; Kersting, P.; Odendahl, S.; Joliet, R.; Zabel, A.: Simulation der NC-Fräsbearbeitung – Multiskaliger Ansatz für eine effiziente und flexible Simulation147(2014)6, WB – Werkstatt und Betrieb, pp. 78-81
    • Lehmann, E.: Dr.-Jürgen-Ulderup-Preis. In: Dr.-Jürgen-Ulderup-Stiftung (Edt.): Preis für herrausragende Leistungen in der Promotion, (2014), Hannover: Dr.-Jürgen-Ulderup-Stiftung, published
    • Denkena, B.; Grove, T.; Lucas, H.: Interaction of Load and Residual Stresses in Sintered 1.3344 High Speed Steel. In: Advanced Materials Research, 1018(2014), pp. 145-152
    • Matthias, S.; K√§stner, M.; Reithmeier, E.: Camera and projector calibration of an endoscopic fringe projection system. In: Proceedings of 11th IMEKO Symposium LMPMI2014 (Laser Metrology for Precision Measurement and Inspection in Industry) ISBN 978-92-990075, (2014), published
    • Merklein, M.; Andreas, K.; Gr√∂bel, D.; Hildenbrand, P.; M√ľller, M.; Noneder, J.; Rei√ü, A.; Schneider, T.; Vierzigmann, U.: Potenziale und Grenzen der Simulation in der Fertigungstechnik. In: Simufact Engineering (Edt.): Tagungsband 15. RoundTable - Simulating Manufacturing, (2014), Marburg: ISBN: 978-3-9813814-3-6, published
    • Gr√∂bel, D.; Koch, J.; Vierzigmann, U.; Engel, U.; Merklein, M.: Investigations and approaches on material flow of non-uniform arranged cavities in sheet bulk metal forming processes. In: Procedia Engineering, 81(2014), pp. 401-406
    • Zhao, R.; Weikert, T.; Tremmel, S.; Wartzack, S.: Untersuchung des tribologischen Verhaltens wolframmodifizierter amorpher Kohlenstoffschichten (a-C:H:W) bei systematischer Variation der Biasspannung und des Argonflusses während des Beschichtungsprozesses. In: Gesellschaft für Tribologie e.V. (Edt.): 55. Tribologie-Fachtagung. Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Band 2, (2014), Göttingen, pp. 32/1-32/10
    • Hetzner, H.; Schmid, C.; Tremmel, S.; Durst, K.; Wartzack, S.: Empirical-Statistical Study on the Relationship between Deposition Parameters, Process Variables, Deposition Rate and Mechanical Properties of a-C:H:W Coatings. In: MDPI (Edt.): Coatings - Special Issue "Recent Aspects of Thin Films Deposited by Magnetron Sputtering and Emerging Applications", 4(2014), pp. 772-795
    • Kersting, P.; Krebs, E.; Baumann, J.; Joliet, R.; Odendahl, S.; Rausch, S.; Schweinoch, M.; Siebrecht, T.: Potentiale geometrisch-physikalischer Prozesssimulationen zur Modellierung und Optimierung spanender Fertigungsverfahren. In: Begleitband zum Fertigungstechnischen Kolloquium Magdeburg – Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz, (2014), pp. 4: 1 - 12
    • Hildenbrand, P.; Schneider, T.; Merklein, M.: Application of Process adapted semi-finished Parts for the Production of Thin-walled Components via Sheet-Bulk Forming.. In: Kawalla, R. (Edt.): AutoMetForm / SFU 2014, (2014), Freiberg: ACATRAIN e.V., pp. 58-66
    • Loderer, A.; Hausotte, T.; Steinmann, P.; Merklein, M.; Landkammer, P.; Schneider, T.; Hildenbrand, P.: Development of a feature adapted measurement evaluation strategy. In: PTB open access repository (Edt.): MacroScale 2014 - Recent developments in traceable dimensional measurements, 10.7795/810.20150325P, (2014), Wien, pp. 1-13
    • Reithmeier, E.; K√§stner, M.; Matthias, S.; Schlobohm, J. : Endoskopische 3D-Messtechnik. In: Deutsche Gesellschaft für angewandte Optik (Edt.): DGaO-Proceedings, (2014), published

    2013

    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: A device for endoscopic measurements of forming tools with filigree side elements. In: Optical Measurement Techniques for Systems & Structures² ISBN 978-90-423-0419-2, (2013), Maasricht: Shaker Publishing, pp. 273-280
    • Schneider, T.; Merklein, M.: Manufacturing of geared sheet metal components by a single-stage Sheet-bulk metal forming process. In: D. Dimitrov; C. Schutte (Edt.): Proc. Conf. Competitive Manufacturing, (2013), Stellenbosch, South Africa: ISBN Nr: 978-0-7972-1405-7, pp. 177-182
    • Salfeld, V.; Krimm, R.; H√ľbner, S.; Vucetic, M.: Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts. In: Advanced Materials Research, 769(2013), Switzerland: Trans Tech Publication, pp. 229-236
    • H√§fner, T.; Reg, Y.; Hetzner, H.; Schmidt, M.: Microstructuring tools for sheet metal bulk forming – a designated application for picosecond laser. In: Journal of Laser Micro Nanoengineering, 8(2013)1, pp. 39-44
    • Hauer, F.; Willner, K.: Development of a friction law respecting plastic surface smoothing. In: Key Engineering Materials (Edt.): 554(2013), Durnten - Zurich: Trans Tech Publications Ltd, pp. 1471-1477
    • Hetzner, H.; Zhao, R.; Tremmel, S.; Wartzack, S.: Tribological adjustment of tungsten-modified hydrogenated amorphous carbon coatings by adaption of the deposition parameters. In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B. Merklein, M. (Edt.): 10th International Conference THE "A" Coatings, 10.-11. April 2013, (2013), Aachen: Shaker, pp. 39-49
    • Wartzack, S.; Hetzner, H.; Tremmel, S.: Amorphe Kohlenstoffschichten für die Blechmassivumformung. In: Konstruktion, 3(2013), pp. 65-66
    • Opel, S.; Schneider, T.; Merklein, M.: Manufacturing of geared sheet metal components using flexible rolled tailored blanks. In: Key Engineering Materials, 554(2013), pp. 1459-1470
    • Biermann, D.; Tillmann, W.; Herper, J.: New coating systems for temperature monitoring in turning processes. In: Surface & Coatings Technology, 215(2013), pp. 376-380
    • Koch, J.; Merklein, M.: Cold forging of closely-tolerated functional components out of blanks – possibilities of the new process class sheet-bulk metal forming. In: Japan Society for Technology of Plasticity (Edt.): Proc. of the 6th JSTP International Seminar on Precision Forging, (2013), pp. 109-112
    • Lehmann, E.; Fa√ümann, D.; L√∂hnert, S.; Schaper, M.; Wriggers, P.: Texture development and formability prediction for pre-textured cold rolled body-centred cubic steel. In: International Journal of Engineering Science, 68(2013), pp. 24-37
    • Isik, K.; Soyarslan, C.; Tekkaya, A.: Continuum Damage Mechanics (CDM) Based Local Approach to the Sheet-Bulk Metal Formability Prediction. In: Advanced Materials Research, 769(2013), pp. 205-212
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Kersting, P.; Tillmann, W.; Herper, J.: Innovative tools to improve incremental bulk forming processes. In: Key Engineering Materials , 554(2013), pp. 1490-1497
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.: Novel five-axis forming press for the incremental sheet-bulk metal forming. In: Key Engineering Materials, 554(2013), pp. 1478-1483
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: High resolution measurements of filigree, inner geometries with endoscopic micro fringe projection. In: Proceedings of SPIE, Optical Measurement Systems for Industrial Inspection VIII, 8788(2013)1, SPIE, pp. 878817-1
    • Ohrt, C.; Matthias, S.; K√§stner, M.; Reithmeier, E.: A DEVICE FOR ENDOSCOPIC MEASUREMENTS OF FORMING TOOLS WITH FILIGREE SIDE ELEMENTS. In: Buytaert J. (Edt.): Recent Advances in Topography Research ISBN: 978-1-62618-840-2, (2013), Nova Science Publishers, pp. 255 - 276
    • Hense, R.: Using Chatter Vibrations in Milling to Create Tribo-Functional Surfaces for Sheet-Bulk Metal Forming Tools. In: Advanced Materials Research, 769(2013), pp. 263-270
    • Breitsprecher, T.; Wartzack, S.: A classification system for secondary design features for the use within sheet-bulk metal forming. In: Lindemann, U.; Srinivasan, V.; Kim, Y.S.; et al. (Edt.): DS 75-5: Proceedings of the 19th International Conference on Engineering Design (ICED13), (2013), Seoul: Design Society, pp. 039–048
    • Merklein, M.; Hagenah, H.; Schneider, T.: Sheet-Bulk Metal Forming Processes - State of the Art and its Perspectives. In: R. Kolleck (Edt.): TTP 2013 - Tools and Technologies for Processing Ultra High Strength Materials, (2013), Graz, Österreich: Verlag der TU Graz, pp. 197-204
    • Plettke, R.; Opel, S.: Investigations on orbital forming of sheet metals to manufacture tailored blanks with a defined sheet thickness variation. In: Advanced Materials Research, 769(2013), pp. 157-164
    • Ohrt, C.; Andreas P√∂sch; K√§stner, M.; Reithmeier, E.: Potentials of Endoscopic Fringe Projection - A Differentiation of Measuring Video-, Fiber- and Borescopy. In: W.Osten (Edt.): Fringe 2013, 7th International Workshop on Advanced Optical Imaging and Metrology, (2013), Berlin Heidelberg 2014: Springer-Verlag, pp. 735 - 740
    • Ohrt, C.; Andreas P√∂sch; K√§stner, M.; Reithmeier, E.: One Image Fibrescopic Finge Projection with Inverse Approach. In: 11th International Symposium on Measurement and Quality Control, (2013), Cracow-Kielce, Poland, published on CD
    • Weckenmann, A.; Hartmann, W.: Function-oriented Measurements - the Path from Macro to Micro and Nano Range. In: Aguilar Martin, J.; Yagäe Fabra, J.; Lope Domingo, M.; Santolaria Mazo, J.; Albajez Garcia, J. (Edt.): Proceedings of the 5th Manufacturing Engineering Society International Conference (5th Manufacturing Engineering Society International Conference - MESIC 2013, (2013), Zaragoza, Spain, published
    • Hartmann, W.; Weckenmann, A.: Function-Oriented Dimensional Metrology - More than Determining Size and Shape. In: AMA Service GmbH (Edt.): Proceedings of AMA Conferences 2013 with SENSOR, OPTO, IRS² (Sensor 2013 - 16th International Conference on Sensors and Measurement Technology, Nürnberg, 14.–16.05.2013), (2013), pp. 285-290
    • Germain, S.; Landkammer, P.; Steinmann, P.: On a recursive formulation for solving inverse form finding problems in isotropic elastoplasticity. In: Advanced Modelling and Simulation in Engineering Sciences, 1(2013)10, pp. 1-19
    • Schmaltz, S.; Willner, K.: Implementierung und Anpassung eines Materialmodells für FE-Simulationen in der Blechmassivumformung. In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben (Edt.): XXXII. Verformungskundliches Kolloquium, 32(2013)1, Leoben, Österreich, pp. 95-100
    • Schmaltz, S.; Willner, K.: Sheet steel material parameter identification utilizing a biaxial tensile test and optical full-field measurements. In: A. Chrysochoos, H. Louche B. Wattrisse (Edt.): PhotoMechanics 2013, International Conference on Full-Field Measurement Techniques and their Applications in Experimental Solid Mechanics, (2013), Montpellier, France, pp. 89–92
    • Hartmann, W.; Loderer, A.: Measurement procedures and evaluations methods for the extraction and assessment of functional features of microstructured surfaces. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 61
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Qualifying measuring systems by using Six Sigma. In: Commitee of Mechanical Engineering of the Polish Academy of Sciences (Edt.): The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (11.-13.09.2013, Krakau - Kielce, Polen), (2013), Krakau, Kielce, pp. 93
    • Loderer, A.; Galovskyi, B.; Hartmann, W.; Hausotte, T.: Measurement strategy for a production-related multi-scale inspection of formed work pieces.. In: Seliger, G. (Edt.): Proceedings of the 11th Global Conference on Sustainable Manufacturing - Innovative Solutions, (2013), Berlin: Universitätsverlag der TU Berlin, pp. 148-153
    • Schmaltz, S.; Willner, K.: Material modelling and parameter identification for sheet-bulk metal forming. In: Onate, E.; Owen, D.R.J.; Peric, D.; Suarez, B. (Edt.): Proceedings of the XII International Conference on Computational plasticity - Fundamentals and Applications, 12(2013)1, Barcelona, Spain, pp. 39-50
    • Schmaltz, S.; Willner, K.: Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation. In: Journal of JSEM, 13(2013)1, pp. 120-125
    • Merklein, M.; Hagenah, H.; Schneider, T.: Blechmassivumformung – Stand der Technik und Ausblick. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 1-10
    • Kersting, P.; Odendahl, S.: Higher Efficiency Modeling of Surface Location Errors by Using a Multi-scale Milling Simulation 9(2013), Procedia CIRP, pp. 18-22
    • Vierzigmann, U.; Schneider, T.; Koch, J.; Merklein, M.; Engel, U.; Hense, R.; Biermann, D.; Krebs, E.; Kersting, P.; Lucas, H.; Denkena, B.; Herper, J.; Tillmann, W.; Stangier, D.: Untersuchungen von Tailored Surfaces für die Blechmassivumformung mittels angepasstem Ringstauchversuch. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 137-162
    • Salfeld, V.; Krimm, R.; Behrens, B.; Sieczkarek, P.; Tekkaya, A.; Tremmel, S.; Wartzack, S.: Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen. In: Merklein, M., Behrens, B.-A., Tekkaya, A. E. (Edt.): Tagungsband zum 2. Workshop Blechmassivumformung 2013 - DFG Transregio 73, (2013), Bamberg: Meisenbach , pp. 13-36
    • Fa√ümann, D.; Isik, K.; Zeller, S.; Beese, S.; N√ľrnberger, F.; Schaper, M.; Tekkaya, A.; L√∂hnert, S.; Wriggers, P.: Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen Belastungspfaden. In: M. Merklein, B.-A. Behrens, A.E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), pp. 69-84
    • Tillmann, W.; Herper, J.; Laemmerhirt, I.-A.: Tribological comparison of different surface topographies coated with chromium aluminium nitride. In: Materialwissenschaft und Werkstofftechnik, 44(2013)8, pp. 730-735
    • Schmaltz, S.; Landkammer, P.; Beyer, F.; Kumor, D.; Rademacher, A.; Blum, H.; Steinmann, P.; Willner, K.: Vorstellung eines Simulationsbenchmarks für die Blechmassivumformung. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 53-68
    • Herper, J.: Tribologische Untersuchungen von verschleiß- und reibungsarmen nanostrukturierten bionischen PVD-Beschichtungen. In: Wolfgang Tillmann (Edt.): Werkstofftechnologische Schriftenreihe, 8(2013), Dissertation: Vulkan Verlag, published
    • Biermann, D.; Krebs, E.; Steiner M.: Investigation of Different Hard Coatings for Micromilling of Austenitic Stainless Steel. In: Procedia CIRP, 7(2013), pp. 246-251
    • Breitsprecher, T.; Hense, R.; Beyer, F.; Biermann, D.; Wartzack, S.; Willner, K.: Sensitivitätsanalyse der tribologischen Eigenschaften gefräster Oberflächenstrukturen bei der Blechmassivumformung. In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (Edt.): 2. Workshop Blechmassivumformung, (2013), Bamberg: Meisenbach, pp. 121-136
    • Hokhman, O. R.; Volchok, N. A.; Fa√ümann, D.: Distribution of Microdefects in Sheets of St1.03-12 Low-Carbon Steel in Tension at Different Rates. In: Materials Science , 49(2013)2, pp. 199-205
    • K√§stner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.: Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück. In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), Bamberg: Meisenbach, pp. 101-118
    • Germain, S.: On inverse form finding for anisotropic materials in the logarithmic strain space. In: P. Steinmann, K. Willner (Edt.): Dissertation, Schriftenreihe Technische Mechanik, 8(2013), Erlangen: FAU Erlangen-Nürnberg, pp. 1-144
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Verfahren zur Herstellung eines Bauteils und kombiniertes Umformwerkzeug dafür. In: Patent: WO 2013017659 A1, (2013), published
    • Weckenmann, A.; Hartmann, W.: Function-oriented Measurements – the Path from Macro to Micro and Nano Range. In: Procedia Engineering, 63(2013), Amsterdam: Elsevier, pp. 861 - 872
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Influence of Superimposing of Oscillation on Sheet-Bulk Metal Forming. In: Key Engineering Materials, 554(2013), Trans Tech Publications, Switzerland, pp. 1484-1489
    • Lehmann, E.: Computational homogenisation of polycrystalline elastoplastic microstructures at finite deformation. In: Prof. Dr.-Ing. habil. Dr. h.c. mult. Peter Wriggers (Edt.): Dissertation, (2013)2, Hannover: Institut für Kontinuumsmechanik, published
    • Krebs, E.: Mikrofräsen von funktionalen Oberflächenstrukturen in hochharten Arbeitsstählen. In: Biermann, D. (Hrsg.) (Edt.): Begleitband zum Fachgespräch zwischen Industrie und Hochschule „Zerspanen im modernen Produktionsprozess“, (2013), pp. 189-199

    2012

    • Schmaltz, S.; Willner, K.: Material Parameter Optimization utilizing full-field strain measurement data and the Finite Element Method. In: Lehrstuhl für Umformtechnik, Montanuniversität Leoben (Edt.): XXXI. Verformungskundliches Kolloquium, 31(2012)1, Leoben, Österreich, pp. 13-18
    • Behrens, B.; Krimm, R.; Salfeld, V.: Process-machine interaction in Sheet-bulk metal forming. In: Key Engineering Materials (Edt.): (2012), pp. 999-1004
    • Weckenmann, A.; Akkasoglu, G.: Maturity determination and information visualization of new forming processes considering uncertain indicator values. In: AIP Conference Proceedings, 1431(2012), pp. 899-911
    • Weckenmann, A.; Akkasoglu, G.: Maturity determination of new forming processes considering uncertain indicator values. In: Key Engineering Materials, 502(2012), Schweiz: Trans Tech Publications, pp. 97-102
    • Weckenmann, A.; Werner, T.; Akkasoglu, G.: From Filtering Waste to Enabling Innovation - Facing the Challenges of Engineering in Quality Management . In: Quality - Access to Success, 13(2012)126, pp. 72-78
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Untersuchung des tribologisch-mechanischen Verhaltens amorpher Kohlenstoffschichten mittels Load Scanner. In: Mat.-wiss. u. Werkstofftech., 43(2012)3, Weinheim: Wiley Verlag, pp. 226-233
    • Lehmann, E.; Schmaltz, S.; Germain, S.; Fa√ümann, D.; Weber, C.; L√∂hnert, S.; Schaper, M.; Steinmann, P.; Willner, K.; Wriggers, P.: Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.993, pp. 993-998
    • Weckenmann, A.; Akkasoglu, G.: Maturity Model for the development of new forming processes applied to the Sheet-Bulk Metal Forming. In: Key Engineering Materials, 504(2012), Schweiz: Trans Tech Publications, pp. 1011-1016
    • Germain, S.; Steinmann, P.: Towards inverse form finding methods for a deep drawing steel DC04. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.619, pp. 619-624
    • Merklein, M.; Plettke, R.; Schneider, T.; Opel, S.: Manufacturing of sheet metal components with variants using process adapted semi-finished products. In: Key Engineering Materials, 504(2012), Schweiz: Trans Tech Publications, pp. 1023-1028
    • Weckenmann, A.; Akkasoglu, G.: Methodic design of a customized Maturity Model for Geometrical Tolerancing. In: Procedia CIRP, (2012), Netherlands/UK: Elsevier, in print
    • Weckenmann, A.; Reithmeier, E.; Merklein, M.; Wartzack, S.; Behrens, B.; Akkasoglu, G.; Ohrt, C.; Schneider, T.; Salfeld, V.; Breitsprecher, T.; Plugge, B.: Methodengestützte Referenzvorgehensweise für neue Umformverfahren. In: Zeitschrift für wirtschaftlichen Fabrikbetrieb ZWF, 107(2012)1, München: Hanser, pp. 43-47
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: The Load-Scanning Test – Evaluation of a Universal Tribological Model Test in View of Sheet Bulk Metal Forming. In: Key Engineering Materials, 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.981, pp. 981-986
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Amorphous Carbon Coatings for Locally Adjusted Tribological Properties in Sheet Bulk Metal Forming. In: Key Engineering Materials, 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.969, pp. 969-974
    • Merklein, M.; Opel, S.; Schneider, T.; Koch, J.: Überblick der Blechmassivumformung. In: Umformtechnik, 1(2012)3, Bamberg: Meisenbach, pp. 42-43
    • Merklein, M.; Plettke, R.; Opel, S.: Orbital forming of tailored blanks from sheet metal. In: Annals of the CIRP, 1(2012)61, Amsterdam: Elsevier, pp. 263-266
    • Fa√ümann, D.; Schaper, M.; Bach, F.: Investigation of Ductile Damage Development in Ferritic Steel Subject to Uniaxial Deformation. In: Fatigue and Fracture of Engineering Materials and Structures , (2012), published
    • Investigation of Ductile Damage Development in Ferritic Steel Subject to Uniaxial Deformation. In: Fatigue & Fracture of Engineering Materials & Structures, (2012), in print
    • Akkasoglu, G.; Weckenmann, A.: Systematic design of a Maturity Model for the Development of New Forming Processes. In: Journal of Management and Finance 10 (2012) 3, pp. 191-202. - ISSN 2084-5189., (2012), published
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests. In: Surface and Coatings Technology, 206(2012)23, doi:10.1016/j.surfcoat.2012.05.077, pp. 4864-4871
    • Lizunkova, Y.; Hassel, T.; Bach, F.: Temperature control during the APN-process on the steel 1.3343. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.1017, pp. 1017-1022
    • Reithmeier, E.; Ohrt, C.; K√§stner, M.: Fast Endoscopic Geometry Measurement of Sheet-Bulk Metal Formed Part. In: CIRP January Meeting 2012 (Edt.): (2012), published
    • Ohrt, C.; Hartmann, W.; K√§stner, M.; Weckenmann, A.; Hausotte, T.; Reithmeier, E.: Holistic measurement in the sheet-bulk metal forming process with fringe projection. In: scientific net (Edt.): Key Engineering Materials, 504(2012), Zurich-Durnten,Switzerland: Trans Tech Publications, pp. 1005-1010
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Fast Endoscopic Geometry Measurement with Fibre Based Fringe Projection for Inner Geometries. In: CMSC 2012 (Edt.): (2012), published
    • Breitsprecher, T.; Hense, R.; Hauer, F.; Wartzack, S.; Biermann, D.; Willner, K.: Acquisition of heuristic knowledge for the prediction of the frictional behavior of surface structures created by self-excited tool vibrations. In: Key Engineering Materials, 504(2012), Trans Tech Publications, pp. 963-968
    • Behrens, B.; Krimm, R.; Salfeld, V.: Analysis of Machine Influence on Process Stability in Sheet-Bulk Metal Forming. In: 45th CIRP CMS (Edt.): (2012), pp. 36-40
    • Lehmann, E.; L√∂hnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation. In: Technische Mechanik, 32(2012)2, pp. 369-379
    • Schmaltz, S.; Willner, K.: Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation. In: Proc. of ISEM-ACEM-SEM-7th ISEM’12-Taipei Conference, (2012), Taipei, Taiwan (R.O.C.), published
    • Sieczkarek, P.; Kwiatkowski, L.; Tekkaya, A.; Krebs, E.; Biermann, D.; Tillmann, W.; Herper, J.: Improved Tool Surfaces for Incremental Bulk Forming Processes of Sheet Metals. In: Key Engineering Materials (Edt.): 504(2012), pp. 975-980
    • Surmann, T.; Krebs, E.: Optimization of Micromilling by Adjustment of Inclination Angles. In: 1st CIRP Global Web Conference, (2012), accepted
    • Kersting, P.; Krebs, E.; Biermann, D.: Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel. In: Engineering (Edt.): (2012), accepted
    • Tillmann, W.; Herper, J.: Development and Tribological Investigation of the Coating System Chromium Carbonitride (CrCN) to Different Surface Designs. In: Journal of Materials Science and Engineering (Edt.): (2012)4, pp. 223-229
    • Vierzigmann, U.; Koch, J.; Merklein, M.; Engel, U.: Material Flow in Sheet-Bulk Metal Forming. In: Key Engineering Materials, 504(2012), Durnten-Zurich: Trans Tech Publications, pp. 1035-1040
    • Krebs, E.; Kersting, P.; Biermann, D.: Using NC-path deformation for compensating tool deflections in micromilling of hardened steel. In: Procedia CIRP (Edt.): 1(2012), pp. 132-137
    • Fa√ümann, D.; N√ľrnberger, F.; Schaper, M.; Bach, F.: Präparationsroutine zur in-situ Dehnuntersuchung des Tiefziehstahls DC04 mittels Transmissionselektronenmikroskopie. In: Praktische Metallographie, 49(2012)9, pp. 577-587
    • Hetzner, H.: Microstructuring tools for sheet bulk metal forming - a designated application for picosecond laser. In: Proc. 13th International Symposium on Laser Precision Microfabrication, 12.-15. Juni 2012, (2012), Washington, USA, pp. 1-6
    • Biermann, D.; Surmann, T.; Hense, R.: Korrektur von gemessenen Zerspankräften beim Fräsen. In: wt-online, (2012), pp. 789–794
    • Merklein, M.; Behrens, B.; Brosius, A.; Hagenah, H.; Tekkaya, A.; Weckenmann, A.: Bulk forming of sheet metal. In: Annals of the CIRP, 61(2012)2, Amsterdam: Elsevier, pp. 725-745
    • Hauer, F.; Willner, K.: Halfspace Simulation of Rough Surface Contact in Metal Forming. In: Proc. 10th World Congress on Computational Mechanics, ISBN 978-85-86686-70-2, (2012), published on CD
    • Lizunkova, Y.; Hassel, T.; Bach, F.: Structure of surface zone of the steel 1.3343 after atmospheric plasma-nitriding. In: Bogorodskiy petschatnik (Edt.): (2012), XXIV Russia Conference on electron microscopy (RCEM-2012), pp. 132-133
    • Hetzner, H.; Tremmel, S.; Wartzack, S.: Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests. In: Surface and Coatings Technology, 212(2012), doi:10.1016/j.surfcoat.2012.09.012, pp. 46-54
    • Ziegler, P.; Breitsprecher, T.; Wartzack, S.: Application of sensitivities on simulation-data-based metamodels during the product synthesis. In: Marjanovic, D. (Edt.): Proceedings of 12th International Design Conference, (2012), Dubrovnik, pp. 589-598
    • Blum, H.; Rademacher, A.; Stiemer, M.: Goal oriented error control for frictional contact problems in metal forming. In: Key Engineering Materials, 504(2012), pp. 987-992
    • Breitsprecher, T.; Wartzack, S.: Architecture and realization of a self-leraning engineering assistance system for the use within sheet-bulk metal forming. In: Hansen, P.; Rasmussen, J. (Edt.): Proceedings of 9th Norddesign Conference, (2012), Aalborg (Dänemark), published
    • Akkasoglu, G.; Weckenmann, A.: Design of a maturity model for new forming processes considering uncertain values. In: 2nd International Conference on Quality and Innovation in Engineering and Management (Edt.): (2012), accepted
    • Rademacher, A.; Schr√∂der, A.: Dual weighted residual error control for frictional contact problems. In: Humboldt Universität zu Berlin, Institut für Mathematik, Preprint, 12(2012)7, published
    • Ziegler, P.; Wartzack, S.: Visualization of simulation-data-based metamodels during the product synthesis. In: Rasmussen, J. (Edt.): Proceedings of 9th Norddesign Conference, (2012), Aalborg (Dänemark), pp. 638-645
    • Bach, F.: Synthesis of Tribologically Favorable Coatings for Hot Extrusion Tools by Suspension Plasma Spraying. In: Thermal Spray Technology (Edt.): 21(2012)3, pp. 668-675
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Shortening the process chain by sheet-bulk metal forming processes. In: 10th Global Conference on Sustainable Manufacturing (Edt.): (2012), published
    • Akkasoglu, G.; Weckenmann, A.: Design of a maturity model for new forming processes considering uncertain values. In: 2nd International Conference on Quality and Innovation in Engineering and Management (22.-24.11.2012, Cluj-Napoca, Rumänien), (2012), submitted
    • Weckenmann, A.; Akkasoglu, G.; Werner, T.: Paradigm shifts in quality management. In: 2nd International Conference on Quality and Innovation in Engineering and Management (22.-24.11.2012, Cluj-Napoca, Rumänien), (2012), submitted
    • Weckenmann, A.; Akkasoglu, G.; Werner, T.: Paradigm shifts in quality management. In: 2nd International Conference on Quality and Innovation in Engineering and Management (Edt.): (2012), accepted
    • Akkasoglu, G.; Weckenmann, A.: Systematically designed Maturity Model for Sustainable Development of New Forming Processes. In: 10th Global Conference on Sustainable Manufacturing (Edt.): (2012), accepted
    • Akkasoglu, G.; Weckenmann, A.: Systematically designed Maturity Model for Sustainable Development of New Forming Processes. In: 10th Global Conference on Sustainable Manufacturing- CIRP supported (31.10.-02.11.2012, Istanbul, Türkei), (2012), accepted
    • N√ľrnberger, F.; Fa√ümann, D.; Schaper, M.: Numerical investigation of in situ TEM tensile tests. In: Metallurgical and Mining Industry , 4(2012)4, pp. 37-44
    • Germain, S.; Steinmann, P.: On a recursive algorithm for avoiding mesh distortion in inverse form finding6(2012)1, Journal of the Serbian Society for Computational Mechanics, pp. 216-234
    • Germain, S.; Steinmann, P.: On two different inverse form finding methods for hyperelastic and elastoplastic materials12(2012), Proc. Appl. Math. Mech., pp. 263-264
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Erfindung zur signifikanten Erhöhung der Tiefenschärfe bei endoskopischen Messungen
    • Wartzack, S.; Hetzner, H.; Tremmel, S.: Amorphe Kohlenstoffschichten für die Blechmassivumformung. In: ZWF, 107(2012)11, pp. 793-794
    • Behrens, B.; Voges-Schwieger, K.; Bouguecha, A.; Mielke, J; Vucetic, M.: Material Characterization for Sheet-Bulk Metal Forming. In: ESAFORM 2012 - Key Engineering Materials (Edt.): 504(2012), doi:10.4028/www.scientific.net/KEM.504-506.1029, pp. 1029-1034

    2011

    • Soyarslan, C.; Brosius, A.; Tekkaya, A.: Failure Analysis in Bending of a Class of High Strength Steel Sheets Using Porous Plasticity(2011), Tools and Forming 2011, published
    • Merklein, M.; Schneider, T.: Functional Integration of Sheet Metal Parts by Deep Drawing(2011), Steel Research International - Special Edition ICTP 2011, pp. 1036-1041
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: 3D Messtechnik f√ľr Inspektion und In-Situ √úberwachung(2011), Ingenieurspeigel Ausgabe 3 2011, pp. S.71-72
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Anpassung von Strahlformungstechnolgien in Mikrostreifenprojectionssysteme(2011), Laser Metrology for Precision Measurement and Inspection in Industry 2011 VDI-Berichte 2156, pp. 177-184
    • Lehmann, E.; Schmaltz, S.; Fa√ümann, D.; Germain, S.; Weber, C.; L√∂hnert, S.; Schaper, M.; Bach, F.; Steinmann, P.; Willner, K.; Wriggers, P.: Identifikation eines Materialmodells f√ľr den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten(2011), In: M. Merklein, Fr.-W. Bach, A.E. Tekkaya (Hrsg.): Tagungsband zum 1. Workshop Blechmassivumformung 2011, pp. 13-32
    • Soyarslan, C.; Brosius, A.; Tekkaya, A.: Characterization of initial anisotropy of sheet metals employing inhomogeneous strain fields(2011), Numisheet 2011, published
    • Vierzigmann, U.; Merklein, M.; Engel, U.: Tribological Conditions in Sheet-Bulk Metal Forming(2011), published
    • Fa√ümann, D.; Schaper, M.; Bach, F.: Pr√§parations- und Analysestrategie zur Untersuchung verformungsinduzierter Poren in kaltverformtem Stahl(2011), Practical Metallography Band 48, 5/2011, pp. 232-238
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Endoskopische Streifenprojekiton mit erh√∂hter Tiefensch√§rfe(2011), SPIE Optical Metrology 2011 Proceedings, pp. 808215-1
    • Schmaltz, S.; Willner, K.: Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU(2011), published on CD
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Endoskopische Laserstreifenprojektion(2011), Kaiser Friedrich Forschungspreis 2011 InnovationsForum Optische Sensorik, pp. S.85-86
    • Schneider, T.; Merklein, M.: Sheet-Bulk Metal Forming of Preformed Sheet Metal Parts(2011), Schweiz, pp. 83-90
    • Behrens, B.; Krimm, R.; Bouguecha, A.; Salfeld, V.: Characterization of Horizontal Loads in the Production of Asymmetrical Parts(2011), published
    • Behrens, B.; H√ľbner, S.; Krimm, R.; Vucetic, M.; Cahyono, T.: Entwicklung eines hydraulischen Aktuators zur Schwingungs√ľberlagerung in der Umformmaschine(2011), published
    • Schmaltz, S.; Willner, K.: Identification of the yield surface for sheet steel using an optical measurement system(2011), 10th Youth Symposium on Experimental Solid Mechanics, Chemnitz, Germany, published
    • Weickmann, J.: Assistenzsystem f√ľr die Pr√ľfung von Blechbauteilen mit Mehrkomponenten-Streifenprojektionssystemen unter Anwendung der ‚Äěvirtuellen R√ľckdeformation‚Äú(2011), published
    • Krebs, E.; Biermann, D.: Micromilling of Bionic Structures(2011), published
    • Weickmann, J.: Simulation-based determination of local optical probing uncertainty for fringe projection measurements(2011), San Francisco, pp. 7864C1-C12
    • Krebs, E.; Baschin, A.; Biermann, D.: Manufacturing of dies from hardened tool steels by 3-axis micromilling(2011), published
    • Lehmann, E.; L√∂hnert, S.; Wriggers, P.: Towards the effective behaviour of polycrystalline materials for sheet bulk metal forming processes(2011), AIP Conf. Proc., 1353, pp. 1179-1184
    • Merklein, M.; Behrens, B.; Plettke, R.; Krimm, R.; Opel, S.; Schneider, T.; Salfeld, V.: Integrierte Fertigung von tiefgezogenen Blechbauteilen mit Verzahnungselementen unter Einsatz von prozessangepassten Halbzeugen. In: M. Merklein (Edt.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011, (2011), Bamberg: Meisenbach, pp. 159-180
    • Germain, S.; Steinmann, P.: On Inverse Form Finding for Anisotropic Elastoplastic Materials. In: Gary Menary, School of Mechanical and Aerospace Engineering (Edt.): 1353(2011), doi>10.1063/1.3589674: AIP Conference Proceedings, pp. 1169-1174
    • Merklein, M.; Tekkaya, A.; Brosius, A.; Opel, S.; Kwiatkowski, L.; Plugge, B.; Schunck, S.: Machines and Tools for Sheet-Bulk Metal Forming. In: Key Engineering Materials, 473(2011), Schweiz: Trans Tech Publications, pp. 91-98
    • Merklein, M.; Koch, J.; Opel, S.; Schneider, T.: Fundamental investigations on the material flow at combined sheet and bulk metal forming processes. In: Annals of the CIRP, 1(2011)60, Amsterdam: Elsevier, pp. 283-286
    • Hauer, F.; Willner, K.: Elastic-plastic halfspace simulation. In: Proceedings of the 82st Annual Meeting of the International Association of Applied Mathematics and Mechanics, doi: 10.1002/pamm.201110101, (2011), pp. 219-220
    • Hauer, F.; Vierzigmann, U.; Willner, K.; Engel, U.: Numerical simulation of friction in metal forming using a halfspace model. In: AIP Conference Proceedings, The 14th International ESAFORM Conference on Material Forming Esaform 2011, doi: 10.1063/1.3589482, 1353(2011), pp. 1741-1746
    • Behrens, B.; H√ľbner, S.; Bouguecha, A.; Krimm, R.; Cahyono, T.; Salfeld, V.; Vucetic, M.: Blechmassivumformung - ein neues Verfahren zur Herstellung komplexer Bauteile. In: Prof. Dr.-Ing. B.-A. Behrens (Edt.): (2011), published
    • Biermann, D.; Surmann, T.; Odendahl, S.; Hense, R.: Creating Functional Surface Structures by Milling Using Self-Excited Tool Vibrations(2011), pp. 55–58
    • Plugge, B.; Kwiatkowski, L.; Brosius, A.; Tekkaya, A.: Untersuchung von Umformstrategien zum Einstellen mechanischer Eigenschaften von Werkstücken mittels inkrementellem Blech-Massiv Walzen (2011), Belfast, pp. 193-200
    • R√∂hner, S.; Breitsprecher, T.; Wartzack, S.: Acquisition of design-relevant knowledge within the development of sheet-bulk metal forming. 6(2011), Kopenhagen, pp. 108-120
    • Schulz, E.; R√∂hner, S.; Wartzack, S.: Prediction of the Friction Behavior of Lubricated Tribological Systems Containing Amorphous Carbon Coatings Using Artificial Neural Networks(2011), San Diego, published
    • Surmann, T.: Modeling and characterization of surface structures produced by milling(2011), Advanced Materials Research Vol. 223, published
    • Schmaltz, S.; Willner, K.: DOI: 10.1002/pamm.201110208
    • Germain, S.; Steinmann, P.: A comparison between inverse form finding and shape optimization methods for anisotropic hyperelasticity in logarithmic strain space. In: G. Brenn, G.A. Holzapfel, M. Schanz and O. Steinbach (Edt.): 11(2011)1, DOI: 10.1002/pamm.201110175: Proc. Appl. Math. Mech., pp. 367-368
    • Germain, S.; Steinmann, P.: SHAPE OPTIMIZATION FOR ANISOTROPIC ELASTOPLASTICITY IN LOGARITHMIC STRAIN SPACE. In: E. Oñate, D.R.J. Owen, D. Peric and B. Suárez (Eds.) (Edt.): (2011), ISBN 978-84-89925-23-6: COMPUTATIONAL PLASTICITY XI Fundamentals and Applications, pp. 1479-1490
    • Hauer, F.; Willner, K.: Halfspace modeling of elastic-plastic contact of rough surfaces. In: Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI, (2011), pp. 965-975
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.; Weickmann, J.; Weckenmann, A.: Optische Inspektion von Blechmassivumformteilen und -werkzeugen mit feinen Nebenformelementen(2011), tm - Technisches Messen: Oldenbourg Verlag, pp. 95 - 102
    • Weckenmann, A.; Behrens, B.; Reithmeier, E.; Akkasoglu, G.; Vucetic, M.; Ohrt, C.; Cahyono, T.; H√ľbner, S.; K√§stner, M.: Appliance of the maturity method in the develpoment of endoscopic geometry inspection for sheet bulk metal forming tools . In: Total Quality Management & Excellence, 39(2011)1, pp. 11-16
    • Salfeld, V.; Krimm, R.; Behrens, B.: Investigations on the process-machine interaction by forming parts with sheet-bulk metal forming(2011), published
    • Soyarslan, C.; Plugge, B.; Fa√ümann, D.; Isik, K.; Kwiatkowski, L.; Schaper, M.; Brosius, A.; Tekkaya, A.: An experimental and Numerical Assessment of Sheet-Bulk Formability of Mild Steel DC04. In: Journal of Manufacturing Science and Engineering, 133(2011)6, pp. 1-9
    • Merklein, M.; Tekkaya, A.; Brosius, A.; Opel, S.; Koch, J.: Overview on Sheet-Bulk Metal Forming Processes. In: G. Hirt, A.E. Tekkaya (Edt.): Proceedings ICTP 2011, 10(2011), Aachen, pp. 1109-1114
    • Weckenmann, A.; Akkasoglu, G.: Maturity Method for the Development of Metal Forming Processes considering Fuzzy Input Parameters . In: Akkök, M. et al. (Edt.): 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds - DIEMOLD 2011 (23.-26.06.2011, Ankara, Turkey), (2011), Ankara: Atilim University, pp. 9-15
    • Lehmann, E.; L√∂hnert, S.; Wriggers, P.: Towards the effective behaviour of polycrystalline microstructures at finite strains(2011), COMPLAS XI., Barcelona, Spain, accepted
    • Vierzigmann, U.; Merklein, M.; Engel, U.: Friction Conditions in Sheet-Bulk Metal Forming. In: Procedia Engineering, (2011)19, Amsterdam: Elsevier, pp. 377-382
    • Lehmann, E.; L√∂hnert, S.; Wriggers, P.: Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation. In: Proc. Appl. Math. Mech., 11(2011)1, pp. 401-402
    • Hetzner, H.; Koch, J.; Tremmel, S.; Wartzack, S.; Merklein, M.: Improved Sheet Bulk Metal Forming Processes by Local Adjustment of Tribological Properties. In: J. Manuf. Sci. Eng, 133(2011)6, pp. 061011
    • Reithmeier, E.; Weckenmann, A.; Behrens, B.; Ohrt, C.; K√§stner, M.; Akkasoglu, G.; H√ľbner, S.; Krimm, R.; Salfeld, V.; Voges-Schwieger, K.; Vucetic, M.: Qualitätsorientierte Entwicklung der Blechmassivumformung . In: Merklein, M. (Edt.): Tagungsband zum Erlanger Workshop Blechmassivumformung 2011 - DFG TR 73 (13.-14.10.2011, Erlangen), (2011), Bamberg: Meisenbach, pp. 97 - 118
    • Biermann, D.; Merklein, M.; Engel, U.; Tillmann, W.; Surmann, T.; Hense, R.; Herper, J.; Koch, J.; Vierzigmann, U.; Krebs, E.: Umformwerkzeuge in der Blechmassivumformung. In: : Merklein, M.; Bach, Fr.-W.; Tekkaya, A. E.; (Edt.): 1. Workshop Blechmassivumformung, 1(2011)1, Bamberg: Meisenbach, pp. 119-138
    • Hassel, T.; Bach, F.: Economic surface hardening by spray cooling. In: Heat Treatment Material (Edt.): 66(2011)5, pp. 290-296
    • Schaper, M.; Lizunkova, Y.; Vucetic, M.; Hetzner, H.; Opel, S.; Schneider, T.; Koch, J.; Plugge, B.: Sheet-bulk metal forming a new process for the production of sheet metal parts with functional components. In: Metallurgical and Mining Industry, 3(2011)7, pp. 53-58
    • Hassel, T.; Lizunkova, Y.; Birr, C.; Bach, F.: Structure and properties of surface zone of high-speed steel 1.3343 after atmospheric plasmanitriding. In: State Key Laboratory of Advanced and joining, HIT (Edt.): (2011), Harbin, China: the 11th International Workshop on Plasma-Based Ion Implantation & Deposition, pp. 50-51
    • Hetzner, H.; Tillmann, W.; Tremmel, S.; Herper, J.: Tribologische Dünnschichten für die Blechmassivumformung. In: Merklein, M.; Bach, F.-W., Tekkaya, A.E. (Edt.): 1. Workshop Blechmassivumformung, (2011), Bamberg: Meisenbach, pp. 139-158
    • Breitsprecher, T.; Hense, R.; Hauer, F.; Biermann, D.: Akquise von heuristischem Wissen für die Prädiktion von Oberflächenstrukturen beim Fräsen mit regenerativen Werkzeugschwingungen. In: DFG SFB TR 73 (Edt.): Tagungsband zum 1. Erlanger Workshop Blechmassivumformung 2011, (2011), pp. 77-96
    • Vogli, E.; Tillmann, W.; Herper, J.: Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties. In: Applied Surface Science (Edt.): (2011)257, pp. 8550-8557
    • Krebs, E.; Biermann, D.: Fertigen bionischer Strukturen in einem Mikrofräsprozess. In: wt - Werkstattstechnik online (Edt.): wt - Werkstattstechnik online, 101(2011)11, pp. 742-746
    • Brosius, A.; Soyarslan, C.; Stiemer, M.; Isik, K.; Fa√ümann, D.; Sieczkarek, P.; Tekkaya, A.; Blum, H.; Schaper, M.; Bach, F.: Numerische und metallurgische Analyse der Werkstoffschädigung in der Blechmassivumformung. In: M. Merklein, Fr.-W. Bach, A.E. Tekkaya (Edt.): Tagungsband zum 1. Workshop Blechmassivumformung, (2011), Bamberg: Meisenbach, pp. 33-50
    • Hassel, T.; Bach, F.: Thermal treatment of contaminated concrete surfaces as a decommissioning method for Nuclear Power Plant Buildings. In: Proceedings of 1st International Conference on Stone and Concrete Machining (Edt.): (2011), Hannover, pp. 129-135
    • Hassel, T.; Bach, F.: Hot-Wire-Plasmaschneiden mit exotherm abreagie-rendem Zusatzwerkstoff zur Erhöhung der Schneidleistung. In: KTG Kerntechnische Gesellschaft e.V. (Edt.): (2011), 10 Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle", pp. 512-534
    • Behrens, B.; H√ľbner, S.; Krimm, R.; Wager, C; Vucetic, M.; Cahyono, T.: Development of a Hydraulic Actuator to Superimpose Oscillation in Metal-Forming Presses. In: Sheet Metal 2011 - Key Engineering Materials (Edt.): 473(2011), doi:10.4028/www.scientific.net/KEM.473.217, pp. 217-222

    2010

    • Soyarslan, C.; Brosius, A.; Tekkaya, A.: Inverse method for identification of initial yield locus of sheet metals utilizing inhomogeneous deformation fields(2010), published
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Endoskopische Messverfahren in der Mikrotechnik - Erfassung filigraner Mikrogeometrien mithilfe faseroptischer Streifenprojektion(2010), Industrie Management, pp. 29 - 32
    • Ohrt, C.: Endoskopische Geometriepr√ľfung mit modularen glasfaserbasierten Sensoren(2010), published
    • Ohrt, C.; K√§stner, M.; Reithmeier, E.: Optimierung eines endoskopischen Streifenprojektionssystems(2010), Vierter Workshop Optische Technologien Hannoversches Zentrum f√ľr optische Technologien Tagungsband, pp. 315-320
    • Wartzack, S.; Hetzner, H.; R√∂hner, S.: Sonderforschungsbereich/Transregio 'Blechmassivumformung' angelaufen(2010), Konstruktion 11/12-2010, pp. 52, 62
    • R√∂hner, S.; Wartzack, S.: Anforderungen an die Wissensakquisitionskomponente eines selbstlernenden Assistenzsystems(2010), Magdeburg, pp. 91-96
    • R√∂hner, S.; Wartzack, S.: Konzept f√ľr eine simulationsgetriebene-wissensbasierte Produktentwicklung im Umfeld mechatronischer Systeme(2010), Hamburg, pp. 223-234
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Design of a Modular Tool System for the Sheet-Bulk Metal Forming Process(2010), IN-TECH Prag, pp. 562-565
    • Behrens, B.; Krimm, R.; H√ľbner, S.; Cahyono, T.: Flow Analysis of a Rotary Piston Valve with CFX Mesh Motion Techniques(2010), published
    • Weickmann, J.; Weckenmann, A.; Brenner, P.: Automatic, Task-Sensitive and Simulation-Based Optimization of Fringe Projection Measurements.(2010), Schweiz, published
    • Wartzack, S.; Hetzner, H.; R√∂hner, S.: Neuer Sonderforschungsbereich/Transregio angelaufen(2010), Bd. 105. ZWF 9 (2010), pp. 762
    • R√∂hner, S.; Wartzack, S.: Comparison of Predictive Data Mining Methods for their Application in a Design Process(2010), G√∂teburg, published
    • R√∂hner, S.; Gruber, G.; Wartzack, S.: Concept for the Architecture of a Self-Learning Engineering Assistance System(2010), G√∂teburg, published
    • Behrens, B.; Bouguecha, A.; Krimm, R.; Salfeld, V.: Consideration of Machine Properties in FE Analysis of Sheet Metal Forming Processes(2010), 2nd International Conference on Process Machine Interactions (CIRP-PMI), Vancouver, Canada, published on CD
    • Biermann, D.; Surmann, T.; Odendahl, S.; Krebs, E.: Surface Structuring by Milling with Intentionally Invoked Chatter(2010), published on CD
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Integration of an Active Forming Die in a Modular Tool System for Sheet-Bulk Metal Forming(2010), IDDRG Graz, published
    • Biermann, D.; Kersting, P.: A measuring device for experimental modal analysis of thin-walled workpieces on five-axis milling machines(2010), International Journal of Material Forming, pp. 451-454
    • Soyarslan, C.; Tekkaya, A.: A damage coupled orthotropic finite plasticity model for sheet metal forming: CDM approach(2010), pp. 150-165
    • Kahnis, P.; Biermann, D.: Mikrofr√§sen filigraner Strukturen in Formeins√§tzen(2010), published
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Materialcharakterisierung f√ľr die Blechmassivumformung(2010), published
    • Tillmann, W.; Vogli, E.; Herper, J.: Nanostructured bionic PVD-coatings for forming tools. In: Key Engineering Materials (Edt.): (2010), pp. 41-48
    • Hassel, T.; Birr, C.; Bach, F.: Surface zone modification by atmospheric plasma-nitriding (APN) with the aid of the transmitted plasma-arc. In: Key Engineering Materials (Edt.): 438(2010), pp. 147-154
    • Brenner, P.; Weckenmann, A.; Akkasoglu, G.: Referenzmodellgestützte Reifegradabsicherung bei der Entwicklung neuer umformtechnischer Verfahren . In: Schmitt, R. (Edt.): Berichte zum Qualitätsmanagement - Unternehmerisches Qualitätsmanagement, 12(2010), Aachen: Apprimus, pp. 123-144
    • Lehmann, E.; L√∂hnert, S.; Wriggers, P.: Modelling Metals at Finite Deformation. In: Proc. Appl. Math. Mech., 10(2010)1, pp. 305-306
    • Germain, S.; Steinmann, P.: On Inverse Form Finding for Anisotropic Hyperelasticity in Logarithmic Strain Space2(2010)2, IJSCS: Int. J. of Structural Changes in Solids - Mechanics and Applications, pp. 1-16
    • Merklein, M.; Opel, S.; Schneider, T.: Herstellung funktionaler Blechkomponenten. In: wt Werkstattstechnik online, 11(2010), Düsseldorf: Springer, pp. 910-915
    • Vierzigmann, U.; Merklein, M.; Engel, U.: Tailored Surfaces in Sheet-Bulk Metal Forming. In: Felder, E.; Montmitonnet P. (Edt.): Proc. 4th Int. Conf. on Tribology in Manufacturing Processes (ICTMP), 2(2010), Paris: Transvalor - Presses des MINES, pp. 541-550
    • Weckenmann, A.; Brenner, P.; Akkasoglu, G.: A comprehensive approach for a reference model based maturity method for development of new metal forming processes. In: 13th International QMOD conference on Quality and Service Sciences ICQSS 2010 (30.08.-01.09.2010, Cottbus, Germany), (2010), published on CD
    • Weckenmann, A.; Akkasoglu, G.: Managing the challenges in development processes with the maturity method . In: Satyanarayana, B.; Ramji, K. (Edt.): Proceedings of the 3rd International and 24th All India Manufacturing Technology Design and Research Conference AIMTDR 2010 (13.-15.12.2010, Andhra Pradesh, India), 1(2010), Visakhapatnam: Andhra University College of Engineering, pp. 3-10
    • Brenner, P.; Akkasoglu, G.; Weckenmann, A.: Reifegradmethode für neue Fertigungsverfahren - Rasch und sicher auf neue Wege. In: Qualität und Zuverlässigkeit QZ, 55(2010)6, München: Hanser, pp. 52-55
    • Weckenmann, A.; Brenner, P.; Akkasoglu, G.: Reifegradmethode für die Entwicklung neuer Umformverfahren. In: Ingenieurspiegel, (2010)3, pp. 56-58
    • Germain, S.; Steinmann, P.: On Inverse Form Finding For Anisotropic Materials. In: Prof. Christian Wieners (Edt.): 10(2010)1, doi>10.1002/pamm.201010072: Proc. Appl. Math. Mech., pp. 159-160
    • Merklein, M.; Opel, S.: Investigation of Tailored Blank Production by the New Process Class Sheet-Bulk Metal Forming . In: F. Chinesta, Y. Chastel, M.E. Mansori (Edt.): International Conference on Advances in Materials and Processing Technologies (AMPT2010), 1315(2010), Melville, USA: AIP Conference Proceedings, pp. 395-400
    • Hauer, F.; Willner, K.: Normal contact simulation of non-Gaussian fractal surfaces. In: Proceedings of the 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, doi>10.1002/pamm.201010198, 10(2010), pp. 411-412
    • Weber, C.; L√∂hnert, S.; Wriggers, P.: Aspects of the Facet-Edge Data Structure for the Construction of Voronoi Cells. In: Proc. Appl. Math. Mech., 10(2010)1, pp. 645 – 646
    • Merklein, M.; Koch, J.; Schneider, T.; Opel, S.; Vierzigmann, U.: Manufacturing of Complex Functional Components with Variants by Using a new Metal Forming Process – Sheet-Bulk Metal Forming. In: International Journal of Metrial Forming, (2010), Paris: Springer, pp. 347-350
    • Gro√üe-W√∂hrmann, A.; Blum, H.; Stiemer, M.: A posteriori control of modelling errors in linear elasticity. In: Proceedings in Applied Mathematics and Mechanics, 10(2010), pp. 647-648
    • Stiemer, M.; Brosius, A.; Blum, H.; Tekkaya, A.; Merklein, M.: Blechmassivumformung - Potential, technologische Herausforderung und numerische Simulation der umformtechnischen Herstellung komplexer Funktionsbauteile mit Nebenformen aus Blechen. In: Simufact Engineering GmbH (Edt.): Proceedings of the 12th RountTable - Simulation in der Massivumformung, (2010), Bamberg, pp. 221-238
    • Behrens, B.; H√ľbner, S.; Vucetic, M.: Material Characterization for a Simultaneous Combined Sheet-Bulk Metal Forming. In: International Symposium on Plasticity (Edt.): (2010), published

    2009

    • Merklein, M.: Manufacturing of complex functional components with variants by using a new sheet metal forming process. In: Ruan, X.-Y. (Hrsg.): Proc. of 42nd ICFG Plenary Meeting(2009), published
    • Weickmann, J.; Brenner, P.; Weckenmann, A.: Reconstruction of noisy measured sharp edges at thin sheet metal components.(2009), published
    • Weickmann, J.; Weckenmann, A.; Brenner, P.: Automatic, Task-Sensitive and Simulation-Based Optimization of Fringe Projection Measurement.(2009), published
    • Hassel, T.; Bach, F.: Manufacturing surface hardened components of 42CrMo4 by water-air spray cooling. In: Steel Research International (Edt.): 80(2009), pp. 906-915
    • Bach, F.; Behrens, B.; Hassel, T.: Integrierte Wärmebehandlung komplexer Präzisionsschmiedebauteile mittels einer prozess- und geometrieangepassten Zwei-Phasen-Spraykühlung. In: 3rd International Conference on Accuracy in Formin Technology (Edt.): (2009), pp. 283-301